Satellite L500-1R1 died after copying files

Similar Questions

• Satellite L500 - keyboard idle after the mode 'sleep'

  Satellite L500, Windows 7, keyboard become idle after waking up from his sleep. Restarting solves the problem.

  Help would be welcome please!

  Hey William,

  That s odd, but in my opinion you should try a BIOS update. BIOS version latest for your laptop, you can download from the Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But let me give you a little advice: update of the BIOS is always a bit risky so make sure that you are logged on as administrator. In addition, extract all the files from zip archive and close all programs running (also AntiVirus).

  By the way: you use pre-installed Windows 7 in Toshiba or did you do your own installation of Windows?

• Satellite M30X-111 died after about 15 sec after power to the top

  Hello
  My M30X 111 died after about 15 sec after power upward. The blue light comes on, the fan starts and then turns off & the dies machine - however, the blue switch remains on. Then I have to keep the power button up to swith off the machine.

  I can't go as far as the BIOS and it does not start from CD, etc.

  Thanks in anticipation,

  Hello

  The laptop goes to home Toshiba screen?
  If yes there is no hardware malfunction but perhaps something wrong with the software.

  You suggested that it of not possible to enter the BIOS. How have you tried to get into the BIOS?
  As far as I know, this unit uses a Phoenix BIOS so you must press the F2 key immediately after switching on. Press the "F2" key several times to make sure that the option has been enabled.

  The alternative to boot from the CD/DVD drive is using the C key. The same procedure here: press the C key immediately after starting the laptop.
  (the CD must be inserted before you start)

• Computer does not restart during the installation of XP after copying files

  I do a new install of Windows XP on an ASUS laptop A3G of 2005.

  After that he said that the CD has finished copying the files, I've been waiting so he could restart.  Restart the computer, but the screen shows only a blinking white line.  Nothing happened after that so I restarted the computer and the installation process went through again but I found myself stuck in the same exact spot.
  The CMOS battery is broken, so that could be the problem.  Put that side how can I remedy this?

  Without the CMOS battery, youre pc will not work correctly.

  The only function of the CMOS battery is to power the BIOS...

• Satellite L500 - no wireless after installing Win7

  After you perform a clean installation of Windows 7 Professional 32 to my laptop Satellite L 500, I realized that I do not see my wireless network.
  When I click in "open network and sharing center", I see the message that "the map is not connected.
  By clicking under the heading "network adapters" and Device Manager I see "intel WiFi link 5100 AGN. If I decide to uninstall it and reinstall it under another driver, windows always recognizes as wifi link 5100 agn.
  What should I do to get my wifi working?

  Thank you all for your time

  Wireless network card is enabled?
  Move the WLAN switch in position ONE and use the FN + F8 key combination.

• Satellite L500 - connected to the temporary file

  Hello

  can't access my files, just keep being connected to Toshiba of temporary files. AV run the diagnostic tool and there is no hard drive.
  Not a bit of computing...

  I can solve this problem?

  Sorry mate but to be honest I don't know what you're talking about.

  If there is some kind of problem in the system, I recommend you connect by using the 'safe Mode' (while applying power, press F8 → and then choose: safe mode)

  Run the system in Mode without failure, you would be able to access the files on the system, but also of other personal data...

• Satellite L500 - black screen after a reboot manual or automatic

  Hello world

  This has me frustrated for three weeks, but I only just realized it is associated with manual restart or software required.

  My old 6 week L500 laptop refuses display different lights for indiactors on AV - no light on the keyboard, no screen, the fan runs but no disk activity I can hear.
  I managed to drill three times by forcing tap down using the switch hold down, removing battery wait and then start up.

  Earlier today, she decided to put on according to this method, and I was able to quickly jump in and empty my libraries and outlook.pst to a cause external hard drive my business she runs.

  Anyone know a solution to this problem?
  It's the first Toshiba that I have ever owned, and it's really frustrating to have to launch this 4 year old Acer to find a solution to my problem.

  Maybe the problem is Windows 7 but cannot find my way through this place to a response.

  Anyone, please?

  Hello

  You mean the L500 is not unbootable?
  Solution remove the battery and ac adapter doesn't help more?

  Hmm generally this should not happen sometimes the laptop could hang somewhere in the standby or hibernation and the mentioned workaround solution might be an option to wake up the unit

  It is difficult to say what's going wrong here possibly it s hardware related issue
  So perhaps it would be best contacting the local ASP the guarantee must be valid and I think that everything should be done for free

• Update BIOS Satellite L30 - 10V died after unsucsessful

  We couldn't get the L30-10 s to accept the 2 GB of RAM and advises him to upgrade the BIOS.

  We went on the Toshiba site and followed the instructions using the software, they have provided, we started upgrading the L30 - 10 locked up and sat there for the night, now he's dead.
  I have been informed that he needs a new motherboard and I find it hard to believe that it may be that the BIOS that has lost its data.

  Can anyone help, we have been quoted £300 to fix?

  Hello

  You can try this workaround:
  Remove the AC adapter and the battery and wait an hour. After that reconnect the adapter AC/DC and battery. Try to start the laptop and see what happens.

  If it doesn t work you need assistance from an authorized service provider. Technicians can try to reflash the ROM module and in the worst cases, the motherboard needs to be replaced.

  Sorry but there is no other solution for a BIOS update has failed. :(

  Welcome them

• Satellite L500-1R1 does not work on AC

  Hello world

  I have this model for about 3 years now.

  It stopped working and is not problem AC because I checked with both new...
  Although there is a green light when it is connected to the electric network. Battery is not so.

  Can I say goodbye? ;(

  Have you checked the RAM modules?
  Faulty RAM memory would prevent the laptop to boot the system.

  Since its very easy to replace the RAM modules, I would recommend trying this.
  Otherwise, it could be a severe motherboard issue and I guess in this case, the laptop repair can be a very costly affair.

• Satellite A105 - keyboard died after he hit lemonade

  I'm trying to fix a laptop for a niece. History-typical lemonade spilled on the keyboard.

  Symptoms-alpha keypad does not work on the internal keyboard. Combinations 'Fn' do with 'F1, F2 etc' media for media player buttons work. Windows button does not work. When the "alphanumeric" button, I get speakers beep.

  Turns on when I plug in an external usb 'NUM Lock', but the keys don't work.

  It is with Windows XP.

  Tried solutions
  uninstallation and reinstallation of keyboards
  remove the internal keyboard (not tried replacing yet)
  verification of updates of drivers and bios
  Complete virus scan

  Any other suggestions would be greatly appreciated. Thank you all

  Not easy to say what s wrong maybe it's time for the professional appearance of the technician?  :|

• Satellite A500-136 died after the BIOS update.

  Hello friends...

  Today, I tried new BIOS flash, but in 21 of the 37 it stuck.
  I waited for an hour, but nothink, just stuck.
  No one key is active.

  Then I removed my batery and tried to turn on the computer and the screen is black.
  Nothink else does not appear here. I think the bios is dead...

  WHAT I have TO do, I don't want to get to the guarantee, because I need to wait a month, only then my computer will be fixed.

  Please help please please... :(

  SORRY FOR MY POOR EANGLISH

  Hello

  It s a shame hear that mate!
  It seems that something was wrong during the update of the BIOS, and so the laptop won't turn on.
  I'm afraid that you can't do anything else as to contact the local ASP m!

  The local ASP technician must check the device and possibly it might update the BIOS using a special BIOS and the special procedure.

  Good luck buddy

• Satellite L500-1WP: after Win8.1 upgrade USB 3.0 drive external does not work

  Satellite L500-1WP

  After updating Windows 8 to 8.1 my drive USB 3.0 external do not work.
  Windows message: "device not recognized".

  Hello

  I guess you are talking about an external HDD that supports USB 3.0 standard.
  Right?

  Have you tried to connect to another USB port external HARD drive?
  The USB ports work correctly in relation to other USB devices?

  The USB 3.0 device supports Win 8.1?

  You should check this.

• Need new AC adapter for Satellite L500

  The AC on my Satellite L500 adapter died while the laptop was in warranty repairs (again), the repairman to put the cable straight into the bin without saving the part number for me.

  How can I find out the number of PA buy a replacement adapter?

  Thank you

  For example the 19V 4. 74 a power adapter with the part number * PA3716E-1AC3 * should be compatible

• Satellite U500 - refresh doesn't work after copying a file

  Hello

  I have a little problem with my Satellite U500.
  If I copy a file somewhere, he sometimes goes there, but sometimes when I copy the file lets say office, then the file is not visible there. I have to update every now and then to be able to see it there.

  Jaso444

  Hi Jaso444,

  What OS do you have exactly?
  It happens when you copy a file with Windows Explorer or another program?

  Sometimes I also noticed this problem but I think it s normal behavior. In this case, I press F5 (refresh) and everything is ok.

• Satellite L500-13D: all programs & settings are gone after upgrade to Windows 7

  Hello.

  My laptop is Satellite L500-13D

  I've upgraded to WINT in VISTA using official TSB upgrade disk.
  It seems that something was wrong. Win7 installed properly, but unfortunately all installed programs and settings are gone.
  I see also that when the upgrade $directories on C: and E partitions have been created; programs and older files are there.

  A few questions:

  1. is there a way to return return programs?
  2. how to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  3. download TOSHIBA RECOVERY CREATOR?

  Hi mate

  Have you read the manual that came with the laptop and Windows 7 upgrade disc?

  After an upgrade to Windows 7 you need additional disk with the upgrade tools that came with the Windows 7 upgrade disk.

  > 2. How to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  This is not possible because the recovery disk must be created at first running the operating system preinstalled by Toshiba.

  > 3. Download TOSHIBA RECOVERY CREATOR?
  If I know that cannot be downloaded.