Windows Vista crashes when coming out of sleep mode

Similar Questions

• The mouse does not work when coming out of sleep mode

  I move the mouse to the computer of the mode "Eve".  Our journal 3 on tiles appear.  My husband,. admin Acct and finally my user account.  Admin account and my acct have the same privileges.  In any case... The mouse will not move the cursor at all once the computer wakes up from sleep mode.  My husband tile is highlighted and so I either hit tab again so he can highlight other options that I can hit enter too and I hope that the mouse starts to move the cursor.  It won't let me spend the good user.  If I type his password on his account, sometimes it works and other times it won't.  So I tabulate between change username and password reset and cancel until he started working.  Very frustrating!  I changed the batteries in the wireless mouse and it would work for a day or two and then same problem.  I also tried to return to an earlier point when the computer worked as it should.  Again... problem would return.  I have tried installing and re - install the intermittent operation of device (mouse) and then the next day would not.  Finally uninstalled this mouse and bought a new Logitech wireless mouse.  He began to do the same.  Help, please!

  Hello

  (1) work well before?

  (2) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Make sure to enable the option to allow this device to wake the computer for the mouse and keyboard and check if this can help, follow the steps provided below.

  1. click on Start.

  2. now type devmgmt.msc in the search for files and programs.

  3. on the screen of the Device Manager, right click on the mouse and other pointing devices.

  4. Select Properties.

  5. now you must click on the power management tab.

  6. now check box allow this device to wake the computer.

  Method 2 : You can also try to create a new power plan and check if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-create-or-delete-a-power-plan-scheme

  Hope this information is useful.

• My work computer Dell, Windows 7 locks when coming out of sleep/hibernation mode.

  In order to get on the "locked mode", I have to remove ALL power to include battery, and then restart the computer.  Any thoughts?

  I guess that Windows Update works fine on your PC.

  Hardware devices are part of that Windows requires to function, these devices are examined by Windows as soon as it starts so they could explain your hibernation problems.

  See the errors related to the Description Code 10, which generates the Device Manager in Windows computers

  I expect that the Dell LAN driver download, then install them would solve the problem.  Dell driver downloads are exe files that you run to install them.  This facility is expected to replace whetever causes them to malfunction unless, of course, the material itself is faulty in which case you should check in your BIOS disable them so that Windows doesn't bother checking them.  To enter your BIOS, press F2, as soon as the Dell logo is displayed during startup.

• Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Remote usb mouse freezes for bout 45 seconds after coming out of sleep mode

  Hi Aubrey,

  Step 1: Put the computer to boot and see if the problem still occurs

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A80-128: pointer gel coming out of sleep mode

  I have persistent problems with gel pointer coming out of sleep mode. I have to reboot to get it working again. All this experience? (I also had two new hard drives mounted so far due to problems of pointer!)

  Hello

  Have you installed your device with the Toshiba Recovery CD?
  On this CD, you will find a Windows image with all the drivers, tools and patches.
  (Quickfix engineering) QFE patches East of patches from Microsoft you can also find on the Microsoft Web sites.

  But if you have installed the operating system with the Toshiba recovery image all have to factory with no problems.

• Windows Vista crash when idle

  I Vaio(VGN-SZ640) with Windows Vista business, when my computer is idle, after a certain time windows crashed. How can I fix?

  Yasin308,

  The problem occurs in safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - new computer - changes in size of text coming out of sleep mode

  I have DPI set at 125% but when out of sleep mode, the screen goes to 150%, even if she is still set to 125% - so no reason, he goes back to the right size.

  Enjoy all the proposals/solutions.  Linda H.

  For anyone else having the problem; Open the Device Manager, graphics cards and update the drivers from the Chipset.  In addition, make sure you have the correct display resolution.  It worked!

• Windows Vista crashes when updates are being installed

  Regularly, I keep my windows vista up-to-date. However, recently the windows vista displays update 5 new installs is required to close to 400 MB in total. the windows update starts about 5 minutes after the connection automatically, and will reach about 30%, before crashing. This happens on an occurrence regular and become very concerning.

  can anyone help?

  Regularly, I keep my windows vista up-to-date. However, recently the windows vista displays update 5 new installs is required to close to 400 MB in total. the windows update starts about 5 minutes after the connection automatically, and will reach about 30%, before crashing. This happens on an occurrence regular and become very concerning.

  can anyone help?

  Looks like trying to install a Service Pack. Please follow these steps:
  1) click on the round of departure
  (2) in the search field, type msinfo.32
  (3) under programs, click msinfo32.exe
  (4) for the charge of Information System, look next to the Version in the right frame.
  The Service Pack installed will be listed.

  Please post back with what Service Pack level, the system is now.

  In addition, open Windows Update in Control Panel.
  In the context of right, click on "View update history".
  See if Vista Service Pack 2 (KB948465) has failed to install.

  IF so, suggest you not allow him to another facility.
  Click on the round of departure; type services.msc in the search field.
  Click services.msc under programs.
  Enter the password if it is required and click on continue.
  Click background Background Intelligent Transfer Service [BITS].
  Stop the service is listed next to it, click the link for the stop BITS
  If this isn't the case, scroll to Windows Update and click on it.
  Now click on the link to stop the service .
  (NOTE : when the system is restarted the services that you stopped will restart if they are configured to start or start to the delayed start.) BITS must be set to manual for it to run when it is necessary. )

  Show hidden files, folders and system files

  With the help of Windows Explorer (start / all programs/Accessorites/Explorer Windows) access
  WINDOWS\Software Distribution\download
  Delete all the contents of the subfolder download

  Now read this before allowing SP2 download again:
  Learn how to install Windows Vista Service Pack 2 (SP2)

  In addition, temporarily disable the antivirus installed to monitor the system and stop all of its associated services.
  Consult the User Guide, help files or the web site of the manufacturer to find out how this is achieved.

  The quickest way to disable all the 3rd party software load is by performing a clean boot .
  In the clean boot to state a set minimum of drivers and software is responsible.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Windows Vista crashes when configuring updates

  I am currently using a Toshiba Satellite a305-s6916 with Windows Vista Home Premium 64-bit. I had some problems with the computer so I decided to reinstall my OS and have a fresh start. I made the discs by the creator of recovery on the computer disk.

  I reinstalled my OS, got all my files and programs on the computer, then started updates. When I installed Windows Vista Service Pack 2, my computer rebooted, went to the "Configuring updates 2/3 0% ' screen and stayed there." The circle of "loading" froze, I let it sit for an hour and finally started strong. He went to the same screen and froze, I rebooted it in safe mode, it starts normall (not in safe mode), and then asked me to do more updates. I let it reboot and he did the same thing, I rebooted again and he went to the same page with horizontal lines on the screen. I picked up in safe mode, it went through updates and seemed fine. I was using the computer and about 30 minutes later, he froze and made the lines again.

  I decided to reinstall the OS again in case I did something wrong or had a virus transferred in my files. I did reinstall fees disks on my computer of friends (same model bought the same day). This time, I didn't install programs or documents with the exception of my antivirus (eset). I immediately started this updates a little at a time. In a first time no problem, but he did 72 updates automatically, it froze on a similar screen, I rebooted and it worked fine (successful installation). I then continued to make updates. I got an error 80070570 for some and it is resolved by following the steps listed on http://social.technet.microsoft.com/forums/en-us/itprovistasp/thread/829de30b-0634-4186-9172-90cd5776b48c forum. (I have listed these steps below as well) I did not receive any other errors failed after that. When I did the update to IE 8 that it froze again, I rebooted and it has started well. I did several facilities and had problems with one more (I forgot to save that one).

  I went until I didn't have Windows Vist SP2 on the list to download. I left this download and restart it, it froze again on 2 of 3 0% screen configuration updates, I restarted, same thing, then restarted in safe mode. He started up very well.

  Although it seems to work once I started strong each time, I know I shouldn't have these freezing problems.

  Any help is appreciated.

  Steps, I followed to resolve this error:

  It's a Windows Update error. Perform the following steps.

  1. stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:

  a. click on start / all programs/accessories. Right-click "Command Prompt" and select "run as Administrator". Click on 'Continue' in the UAC prompt.

  b. at the command prompt, type the following commands and press ENTER after each command:

  net stop wuauserv
  net stop bits

  2. rename the folder "Catroot2. To do this, follow these steps:

  Type the following commands and press ENTER after each command.

  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc
   
  3 Rename the folder "C:\Windows\SoftwareDistribution":

  Type the following command and press ENTER.

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  4. save the files used by Windows Update and Microsoft Update. To do this, follow these steps:

  a. at the command prompt, type the following commands, press ENTER after each command and then click OK every time that you receive a verification message:
   
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wucltux.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuwebv.dll
   
   
  5. start the Service the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:

  a. at the command prompt, type the following commands and press ENTER after each command:
   
  net start bits
  net start wuauserv
  net start Eventlog
  output

  Restart the computer and try the SP1 update.

  Open a folder of Vista SP2 support for free:

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go tohttp://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

  I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

  1 disabled UAC in Windows
  2 tried an earlier version of the VPN client
  3. by the representative of Cisco, I put the application runs as an administrator

  If there are any suggestions or similar stories, I would be grateful any offereings.

  It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...

• Windows Vista crashes when configuring updates step 3 of 3-37% complete

  The operating system was recently recharged and the current problem started after making updates.

  Hello

  Method 1:

  Try the following article and see if it helps: the update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7 http://support.microsoft.com/kb/949358

  Method2:

  Follow the steps in this article and check if that helps: How to reset the Windows Update components? http://support.Microsoft.com/kb/971058

• Performance issues when coming out of sleep

  I recently built a gaming PC. On Christmas day, I finished putting the thing together. It has an Intel i7-4790 CPU running Intel HD Graphics, 8 GB of Corsair Vengeance RAM, an Asus Z97 - A Mobo and a 2 terabyte Seagate HDD. I installed Windows and put everything in place. Then a week later, my MSI GTX 970 arrived in the mail.

  So, I take the thing to sleep and decreases the performance of the whole thing. Videos YouTube stutter, simple as games fight of World of Tanks to run at its usual rate of 60 fps. To avoid this, I simply restart my comp and then it works fine. performance is back to normal.

  A few weeks, Windows gave me a message on one of the Nvidia drivers causing performance issues when you wake up from sleep. I don't think a lot of it and rejected it. I'll try to reinstall all my Nvidia drivers. I uninstall the Intel HD graphics driver a few days ago and has not changed anything. I would appreciate an answer to this problem because I would like to continue to use the "sleep mode" because it consumes less energy and prolongs the life of my case of LED. Thank you!

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• Windows Vista does not recover from the sleep mode.

  Black screen when the computer is idle

  When my computer is idle for a while, the screen goes black.  I used to shake the mouse and he came right away, but now I have to reboot each time to get my computer to work.  I have Windows Vista Home.  Help, please!

  Original title: black screen

  Hello Taylorlmjp

  See the following two articles concerning the problem you are having with your system does not sleep. Also, if this system was purchased to manufacture such as Dell or HP, you can check with them and find out if they have an updated bios updated. Thank you.
   http://support.Microsoft.com/kb/930091

  http://support.Microsoft.com/kb/266283

• dv6t 7000 image crash with BSOD when coming out of sleep

  My power settings are set to put the laptop to sleep when I close the lid.  As soon as I open the cover, things are fine until I have slide the fingerprint reader.  Laptop fails with BSOD and the only way out is to maintain the power button forcing a hard stop.  I turned off hybrid sleep.  I've turned off the options in management of State of PCI Express - Link Power and also two options in settings USB selective suspend settings USB who discovered reading this forum.  Now, I'm afraid to have this machine in standby mode.  Nothing is ever good happens next.  Help.

  Hi DennyC,

  I will do my best to help you with your problem of hibernation mode. Could you please follow the steps described in this document for using sleep or Hibernation .

  Let me know if this helped.

  Thank you

• Issues coming out of "sleep mode" and strange behavior when restarting with GPU

  I use a desktop computer HP P7-1240 completely stock except for a GPU EVGA GeForce GTX 750 TI SC. The GPU works well when the computer is running (which is strange because the forums have several other discussions mentioning the 700 series must be incompatible with my BIOS).

  However, there are two main strange problems that have arisen since the installation of the GPU. One is that, every time that the computer enters mode "sleep", he refuses to wake back up correctly. It seems to me that the computer active but sends all the signals back panel (at the very least, no video because my monitors remain blank). On rare occasions, he wakes back correctly, but at least 90% of the time, it must be restarted. Upon reboot, the same problem sometimes (not), and the computer must be rebooted a second time until it will start again.

  This leads to the second problem. During startup, the computer goes to a black screen, listing the specifications of basic computer skills (see attached photo. In this screen, the computer does not meet any entry.  He proceeds to beep 3 times, all the same length and height spaced about 30 seconds of gap. After the third beep, the screen goes black and then the computer starts normally with no other strange behavior.

  Without the GPU, none of these problems occur. At the very least, not regularly.

  I saw another thread mentioned that, while the HP support for my office page lists not her, there is an update of the BIOS for my motherboard which has fixed issues related to the GPU more modern. By nature it is an update of the BIOS that does not (seem to) officially support Windows 7, I am reluctant to go forward with this potential solution.

  Although I intend to build myself a new computer from scratch at a certain point, I was hoping to get at least another year out of this machine, if not 2.  While this question does not seem to be immediately threatening the stability of the computer, I can't help but think that it is a question should I go quickly to avoid future problems (not to mention it would save me a good amount of electricity to be able to enter the mode 'sleep' on a regular basis).

  Any suggestions would be greatly appreciated!

  

  Problem has been solved!

  For those of you who have trouble sleeping with the p7-1240 or computers with a card mother identical (MSI Jasmine Ms 7778 ver 1.0), I suggest that you follow this thread:

  http://h30434.www3.HP.com/T5/desktop-hardware/unable-to-boot-with-new-graphics-card/TD-p/3930544/highlight/true

  It is to use an update for your BIOS that is intended only for PC under Windows 8, but that seems to work perfectly well with Windows 7 PC. It solved my problems of sleep and makes the computer to behave at least semi normally while restarting.

  However, as indicated in the wire, an update of the BIOS should be a last resort because it can turn your machine into a very heavy and expensive paperweight if something does not work. Do not forget that you have the worm 1.0 card mother MSI Ms 7778 Jasmine and remember that you update the BIOS version 8.18.

  As I am looking for 2aeo on HP.com currently (according to the thread leading up to), I'm not find the same links I found last week when I went through the update. However, you can find elsewhere.