Windows Vista error - first of all 'Operting System' could not be found and now "BOOTMGR is missing?

Similar Questions

• Windows Mail error message: "some of the files could not be found and could not be attached to the message." You want to send the message anyway? »

  original title: end this message appears "some of the files could not be found and he could not be attached to the message." You want to send the message anyway? "I am running Windows Vista Home Basic Edition
  Hello
  I'm so frustrated, this problem has arisen at a very bad time!

  I started to use Windows Mail a few months ago and have had no problems so far, since Thursday night, every time that I attach a file to an e-mail message when I click on send this message 'some files was not found and could not be attached to the message. You want to send the message anyway? "I am running Windows Vista Home Basic Edition.

  Thank you

  Hello

  Method 1:
  You can perform the steps of troubleshooting from the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Method 2:
  You can check if the default e-mail program is selected, follow the steps to do this:
  a. go to: Control Panel and go to default programs. Select Configure programs and Computer Defaults b. Select continues if the permissions window will appear
  c. left, double-click Custom, under Choose a default e-mail program, select Windows Mail.
  d. click Ok and close.

  Method 3:
  If none of the above steps are useful, then try to perform the system restore to the date when it was working fine.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  NOTE: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Method 4:
  If the file you are trying to download is opened, then it will not download, you can close the file completely and then try to download.

   

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

• Windows Virtual PC integrated with components lock me out of my WinXP - error of OEM comments - "the system could not log. Make sure that your user name and domain are correct... »

  With my new desktop Windows 7 hardware configuration, I decided (before you consider VMware Player) to retry Windows Virtual PC; but instead of using Windows XP Mode (which is useless because the disk is inaccessible), I decided to use my own Windows XP Pro OEM. [I use it for games that won't play on Win7.  Security issues are also irrelevant, because for these games, I'm not likely to use the Web.  Of course, I always Windows Security Essentials in my OEM customers.]

  The problem here is, whenever I have to Activate my integration, features VPC opens as if the Windows XP Mode have been installed (it is not); and when the screen is turned on, it asks my user name and password.  I tried to use the name and the password that I entered when installing my XP OEM; but I get this message:

  "The system could not log.  Make sure that your user name and domain are correct.  Type your password again.  Letters in passwords must be entered using the proper case. »

  How is it that I can't access my Windows XP OEM guest when the integration features are enabled?  Only when they are disabled can I activate my OS; invited but it's counterproductive, because I won't be able to move items from my host in my comments.  Once more, if I should decide to use VPC as my host VM for Linux Ubuntu/Kubuntu, what chance is there that the activation of the integration features will lock out me my Linux guest?

  Another thing: in the Start Menu under Windows Virtual PC folder I have shortcuts for ' Windows Virtual PC ' or 'Virtual Machines' (according to the Win7 version I use, 32-bit or 64-bit); but I also have "Windows XP Mode", I have not installed.  How is that possible?  I checked the shortcut, and point it to rundll32.exe.  Should I just get rid of the shortcut, or I will incur damage to my VPC if I do?

  Hello Cooky,

  Please provide a detailed description of the issue.

  I understand the inconvenience you encountered. However, I appreciate your efforts.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• WINDOWS MEDIA 9 ON WINDOWS VISTA, NO NOISE, SNDVOL ENCODER. EXE COULD NOT BE STARTED WHEN I CLICK ON THE MIXER. Help!

  right... I just got a new computer, the vista Home premium 64-bit, and I use windows media encoder 9 series to stream live radio broadcasts... everything installs ok, but when I click mixer to sort my sound levels it gives me this error:

  "the mixer"sndvol32.exe"application could not be started. the system cannot find the specified file (0 x 80070002).

  I searched in google and microsoft, Web sites, I found a fix for vista, but when I try to install that he says theres a problem with this windows installer...

  I tried to run in compatibility mode for xp sp2

  Any help would be appreciated

  Hi DJ_KingSize,

  This problem occurs because some legacy applications use files or components that were developed prior to Windows Vista. The names of these audio components may be different in Windows Vista. If the calling application uses the hard-coded file names, the new files and components could not be found.

  To resolve this problem, use one of the following methods to change the audio settings for a device.

  Method 1: Use the order Volume of Windows

  To use the Volume of Windows command to change the audio settings for a device, follow these steps:

  1. right click on the speaker in the notification area icon and then click recording devices or reading.

  2. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  3. click on the levels tab.

  4. move the cursor upwards or downwards to set the desired volume level, and then click OK

  Method 2: Use the control panel

  For control panel allows you to change the audio settings for a device, follow these steps:

  1. Click Start, click Control Panel, click hardware and sound and then click sound.

  2. click on the playback or recording.

  3. double-click on the device for which you want to adjust the settings. For example, double-click on Microphone.

  4. click on the levels tab.

  5. move the cursor upwards or downwards to set the desired volume level, and then click OK.

  For more information, see the link below:

  You may receive an error message when you run an application that uses the recording feature or audio playback in Windows Vista

  http://support.Microsoft.com/kb/930095

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Event 45, volmgr. Windows 7 x 64 SP1. "The system could not sucessfully load the crash dump driver."

  The crash dump driver fails to load at startup.  When the system crash it does not blue screen and reboots the system.  I want to get it going so I can read the crashdump...

  There is a fix out there for pre Windows Vista SP1 that appears very relavent but will not be installed (by his design of the correction).

  Details below...

  Log name: System
  Source: volmgr
  Date: 18/05/2011 08:54:37
  Event ID: 45
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Cryogen
  Description:
  The system could not sucessfully load the crash dump driver.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      45
      2
      0
      0 x 80000000000000
     
      39071
      System
      Cryogen
     
   
   
      \Device\HarddiskVolume3
      0000000001000000000000002D0004C003200000BB0000C000000000000000000000000000000000
   
  

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the CRYOGEN system
  System manufacturer system manufacturer
  System product name model system
  System Type x 64-based PC
  Processor Intel (r) Core i7 970 at 3.20 GHz, 3201 Mhz, 6 Lossnay, 12 or logical processors
  BIOS Version/Date American Megatrends Inc. 1301, 16/11/2010
  SMBIOS 2.5 version
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  Cryogen\Charles user name
  Eastern Daylight Time zone
  Physical memory (RAM) installed 24.0 GB
  24.0 GB total physical memory
  18.1 GB available physical memory
  48.0 GB total virtual memory
  41.8 GB available virtual memory
  Page file space 24.0 GB
  File E:\pagefile.sys

  Drop the question above actually lead to what may be a solution... The fix for Windows Vista pre SP1 fixes an issue with the (cloned) dynamic disks used to store the paging file.  I have two drives on the clone (E:\) which the system information noticed the location of the swap file.  I put the pagefile drive to C:\ in the event where it was the same problem, such as reported in the hotfix, but it has not fixed the problem...  So I assumed that this fix has been exceeded and a coincidence. But the information system showed the swapfile E:\, my dynamic disks...

  What has removed the error is "double adjustment" the return to C:\ drive.  Apparently once is not enough.  I put the pagefile on C:\ managed and rebooted system.  Then I noticed the mistake of volmgr came from miroir3 (second player in E:\) still info system showed the swapfile on C:\.   Weird indeed.  I went and be given the C:\ drive as the system swap drive to managed by activation/deactivation/Executive every car out of the current value, and then back to the desired direction.  After having done that and restart once more the error no longer appears in the event viewer at startup.

  The only thing worse than a BSOD, no BSOD.

• Error number: 0x800CCC0D, the host 'POP3' could not be found. Please make sure you entered the server name correctly in Outlook Express 6.

  Original title: "POP3" server could not be found...

  I get the following error message every time I try to use Outlook Express 6 as my default email: 'the host 'POP3' could not be found.  Please check that you have entered the server name correctly.  "Account: 'POP3', server: 'POP3', Protocol: 'POP3', Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D".  I have a Dell Optiplex GX110 desktop computer with a processor Intel Pentium III (996 MHz, 256 MB RAM).  I already know that I have to increase the amount of RAM, but I don't think this is part of my problem.    I am connected to a local network, Verizon (Internet, cable TV and phone package). I run Microsoft Windows XP Professional (5.1.2600) 2002 with service pack 3 version.  I check frequently that my system is configured to automatically receive all updates for Windows XP more updates from Microsoft.  QUESTION: Is there a version of Microsoft in September 2011 that had something to do with POP3 servers?  Obviously it did not automatically installed in my computer.  I even checked my system twice to make sure that Microsoft was on my list of safe sites.  Please help me.  I really want to use Outlook Express 6 as my default email.

  Thank you!
  George Raynes

  Hi GeorgeRaynes,

  1. were you able to use Outlook Express 6 correctly previously?

  2 have you made any hardware changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  Hope the helps of information.
  Please post back and we do know.

• Error - APISupport.dll. the specific module could not be found

  I get this error message at the beginning C:\Users\Owner\AppData\Local\TB\APISupport\APISupport.dll. the specific module could not be found.how should I do.

  DS

  It is an element of conduit, which most people consider the malware.  I remove it and run Malwarebytes

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• There is a problem of backup applications to iTunes to my new iPhone 6 s. apparently, there is an error that says that the applications could not be found. Why can't I make the backup?

  There is a problem of backup applications to i Tunes (previously synced from my iPhone 6) to my new iPhone 6 s. apparently, there is an error and the applications could not be found. How to solve this?

  Are the 6 and 6 times on the same iOS?

  ITunes is also the last version 12.3.3?

• RunDLL error: 'C:\Programsdata\dfrigtion64.dll module could not be found.

  Original title: c:\programsData\dfrigtion64.dll window Module RunDLL not found

  RunDLL window c:\programsData\dfrigtion64.dll module could not be found. This window appears on reboot

  Perhaps the result of a partial elimination of infection with your AV software

  Which anti-virus software is installed?

  Analyze also with this tool free http://www.malwarebytes.org/products/malwarebytes_free/

• I have Window Vista Home Premium 64 bit-Operting system with SP1.__Tried to do an upgrade of the window get error code 646

  The update of window tried to 4 updates.  Some were installed some has failed.  Here are the ones failed.
  Update for Microsoft Office Outlook Junk Email Filter (KB975960)
  Update for Microsoft Word 2007 (KB974561)
  A security update for the 2007 Microsoft Office System (KB973704)
  Update of security for Microsoft Office Excel 2007 (KB973593)

  Please give advice on how to solve this problem.

  Thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Platform update Supplement for Windows Vista for x 64 (KB2117917-french) systems does not update.

  The answer is provided by:
  Ronnie Vernon MVP, moderator
  Date: December 18, 2008

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/70a484f7-fca5-4d6b-BAFF-805160380a86/

  This solution does not work in order for the update to install. Ronnie Vernon's instructions have been followed to the letter, from #1 to #5, but the update of the platform still has not installed. After restarting the computer, the update tries to configure the update and to step 3 of 3 steps, the computer screen indicates that the update is not properly configured, and need to reconfigure. Help, please.

  Try to perform an InPlace upgrade.  This process should not affect your files and personal settings, however, it is always advisable to back up your important files before making any changes to the system.  The steps are below:

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer and try to reinstall SP1.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• Windows Vista update (August 2010) left my laptop could not connect to the Internet via my home wireless network

  Yesterday, on August 13, I installed - as guest - a number of updates to Windows Vista on my laptop. It seems that most of them is security updates. There are 16 in total, of which 9 are titled "A security update for Windows Vista". (For reference, they include KB978886, KB982214 and KB2079403).

  Since the completion of this facility, I can't access the Internet using this laptop. I have a wireless router that works very well. Our other two laptops families (using Windows 7 and other Windows XP uses) are the two beautiful connection today by using the wireless router, so I know that the rest of the installation is fine.

  Immediately before installing updates, everything worked very well; Since then, the problem exists. I made no other changes of configuration, facilities or any measure that might have caused this.

  Please tell us how I can remedy this problem. So far my best idea is to uninstall all updates. I really don't want to do it, because I guess they are important!

  Thank you!

  [FYI - Norton Internet Security includes a third-party firewall (Norton Personal Firewall) as well as an anti-spyware component.]

  Looks like you have a hijackware infection on your hands there, Tim. That being said...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.