Why do I get an error message saying "the specific module could not be found" when opening an image?

Similar Questions

• Error - APISupport.dll. the specific module could not be found

  I get this error message at the beginning C:\Users\Owner\AppData\Local\TB\APISupport\APISupport.dll. the specific module could not be found.how should I do.

  DS

  It is an element of conduit, which most people consider the malware.  I remove it and run Malwarebytes

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.

  Help, please.

  Hello
   
  
  Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
   
  (a) ensure that all laptops the same hardware, the same manufacturer and the same model.
   
  (b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".
  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
   
  Warning of the BIOS:
  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  
  (c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS.

• Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  This message appears when I start my computer.  I think my pc has viruses/malware.  My antivirus firewall program wouldn't start / missing.  I gave my pc days back and managed to restart the firewall.  But I get the message... There was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  To clean malware, take a look here and try what is below if you still have the problem.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Try this program because it will show you everything that tries to run at startup.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Since I removed my old Lexmark printer and replaced by a Kodak ESP C310 printer I get the following popup every time you start... Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Hello jackc37,

  Have you tried to reinstall your Lexmark printer and then uninstall, to check if everything is deleted?  When you started your system in a clean boot, you saw the error listed above?

  How do I uninstall Lexmark printers

  Please let us know status.

  Thank you

  James

• RUNDLL error C:\WINDOWS\dfgwovap.dll the specific module could not be found.

  Original title: RUNDLL error

  has anyone seen a RUNDLL error

  C:\WINDOWS\dfgwovap.dll

  the specific module could not be found.

  Since this jumped on my computer, I can run is more my outlook program.  I opened for 1 second and then closes.  I reinstalled a couple of times and the same thing happens.

  all thoughts

  Thank you

  Jon

  Hi Jon,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a non-Microsoft program is causing this issue
  see How to configure Windows XP to start in a "clean boot" State .
  b. If the issue is not persistent, then from the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once more to solve the problem.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Step 2: If the problem continues, check if a system file is missing or damaged
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error, "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" when removing malware.

  Original title: RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd.
   
  I tried to deleted manually scamware/malware (your computer has been locked by the U.S. Department of Justice) from my computer. After reboot I get this RunDLL error "there was a problem starting c:\users\jordsn\wgsdgsdgdsgsd" "the specified module could not be found" if I click ok or X it stays just black. Please help me if you can. in a lay mans language as much as you can.
  I'm not much more than a geek, but can still manage my own if you tell me exactly what to do. Please include the step by step instructions. Thank you

  Two things... one, take a look at this site for some information and instructions (where something is hanging out)
  http://www.selectrealsecurity.com/malware-removal-Guide/
  and to know exactly what is running at the start have a look at this tool.
  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• RUNDLL error: error loading kbdsnb.dll the specified module could not be found when the system starts

  Original title: Missing Dll message

  I get the following message is displayed after the start of my laptop... "... error rundll error loading kbdsnb.dll... the specified module could not be found.

  It does not appear when I search this file on the net? What is this error and how to fix it?

  Thank you

  Hi heshie75v,

  1. does the computer boot to the desktop?
  2. don't you make changes before the show?

  We assume that the computer starts on the desktop after ignoring this error message. We recommend that you check if a non-Microsoft program is defective. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/310353
  b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
  c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

  Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "failed to loadlibrary error 126: the specified module could not be found" when you install the program

  Original title: error massage

  every time I load the software and then try to open it I failed to loadlibrary error 126: the specified module could not be found

  What can I do to fix this problem

  Hello rayl48,

  In addition to what offers Syed, you could try and update your video card driver.
  I saw the mention that the error is caused by a pilot video obsolete.
  Go to the website of the manufacturer of your video card and download the latest driver for your video card model.

  Or you can go to the computer manufacturer and seeif he is and he's driving for your computer updated model.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error "the specified module could not be found" when the USB drive is connected.

  Original title: execution of disk error hard usb

  I use windows 7. whenever I have plugin a usb drive and open it it gives a shortcut of the same drive without showing all data and when I opened the short cut, the following error is displayed.

  There was a problem starting 4 # .ini
  The specified module could not be found.
  I also try to activate windows bit defender it gives error

  Internal error of shell. Please contact the software developers

  Code = 0xC000005, address = 0x10059E8D

  Hi Prashant,

  Try to uninstall the security essentials and install avast.  I have installed trial version, he found an additional virus and after that my system works fine.  Try it and check if it works.

  Concerning

  Patricia

• When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - the specific module could not be found

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  When turned on the computer it says - Error loading C:\WINDOWS\aluzonah.dll - specific module is not found - the computer seems to work very well however.

  A Google search for this returned no success other than your own message.  This suggests that the file refers to malicious software.

  You have a recent version of an antivirus with a current subscription application?  Have never leave you the subscription expires?

  Startup like these messages can occur if your antimalware application has deleted the payload real malware but has failed to clean up the start of the call.

  First download, install, update and run the following applications of malware free 2 the possibility that one or the other will detect and remove these remains (as well as anything else that your original scan could not detect):

  Malwarebytes

  SUPERAntiSpyware

  If these two applications running is not the message disappears, you will need to know where the call to the missing dll file is now done.  The best tool for this is AutoRuns:http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx the main problem with the help of AutoRuns is that he finds the startup items as much as it can be a little overwhelming. One of the good features of AutoRuns is that you can prevent an element of commissioning by unchecking the box, but if you decide that you really want to start, just re-check the box.  Once you are sure that you will never need of the item to start, remove it.

  Typical advice is to check the logon tab, but because the now-absent file is a dll, it is not likely to appear online in the logon tab.  Yet, take a look at the connection tab and if aluzonah.dll is there, or if there is a line of starting an application of suspect search, a Google search suggests is malware, uncheck the box and restart.  If the entry is far, re - run AutoRuns and remove the line.

  The next place to look is the Winlogon tab, which should have little, or no, entries.

  If you have not yet found the wrong entry, click the all tab, click the top row and then click on file > find and search for aluzonah.dll.  If you find an instance, uncheck the box and then manually move the selection on the following bottom line then press F3 to "search again".

• LoadLibrary failed with error 126 that the specified module could not be found

  Hello, I receive this error randomly when am using oracle sql developer, sometimes, it happens just after the start and sometimes after 5 minutes.

  the error closes the program

  Help, please

  Looking for "loadlibrary failed with the 126 java error" seems to indicate problems with OpenGL and some video drivers and/or environments with multiple monitors. Here are several discussions...

  https://NetBeans.org/bugzilla/show_bug.cgi?id=243153

  Error "LoadLibrary failed with error 126: the module could not - Microsoft Community.

  [SOLVED] Problem with Launcher Technic: load library failed with error 126 - Technic Launcher - Technic Forums

  Therefore, it seems that this issue is not specific to SQL Developer. The last discussion includes a video link in his last message saying that ".dll" is sought instead of "atioglxx.dll' on 32 - bit or systems 'atio6axx.dll' on 64 bit (in the C:\Windows\system32 folder) system, so a workaround is to copy one of those to".dll ".

• Using Windows Media Player, I get the error: "the specified module could not be found" when I try to play a wave (.wav) file.

  I have re-installed sound edge card, updated the driver, checked that it is enabled in the bios. Play other types of sounds.

  Wave Systems sounds do not play either and everything by checking the sound scheme system sounds, (Panel > properties of sounds and audio devices > sounds tab) they don't play and the 'play' button is not enabled.

  Hi sureshotsd,

  · What version of Windows media player you have installed?

  · What is the service pack installed?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  Follow the method below:

  Method 1:

  Create the new user on the computer account and check if you are able to play the file. You can check the link for the procedure to create the new user below account: how to create and configure user accounts in Windows XP:http://support.microsoft.com/kb/279783

  Go back with the results.

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DeskJet 2542 all-in-one: 2542 Deskjet all in one error: "the specified module could not be found" when installing on USB

  Installation runs OK until the USB cable is connected, when the error message appears and the installation fails.

  I have correctly installed and work the printer on another XP PC of a similar age - that is to say old.

  I've updated the XP operating system to SP3 with many updates.

  Check that ports USB read only data fits OK;

  run a / v programs and malware, including Microsoft Safety Scanner;

  check that the USB drivers are up to date;

  software driver uninstalled and reinstalled with the software downloaded from HP;

  performed the procedures detailed in HP Support Forum 4022116

  The same error message.

  It's for my elderly neighbour - help please!

  The somewhat simpler answer to this problem was to do a clean install of XP SP2, accepting the necessary updates, and then install the printer software, downloaded from HP.  A lot of time but it worked, and the old PC runs a little faster!