Windows Vista Home premium; user profile error

Similar Questions

• Update of Windows Vista Home Premium - code 80070490 error:

  Computer - Satellite 200
  Operating system - Vista Home Premium (service pack 1)
  Problem - when I try to update Windows Update (manual and automatic) I get the error code 80070490
  I tried - system restore, download and pay for 'RegCure' and following the instructions on the Microsoft forum without success.
  The computer was shipped with a recovery disc that has no installation to 'fix '.
  If you have a solution that does not involve a complete re - load I would be very grateful
  Please make understandable instructions for a non-techie!

  Thank you

  There is an article on this issue in the Microsoft Knowledge Base:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B958044&x=10&y=4

  So I think that you need to reinstall the computer with the recovery disc.
  Boot from the diskette or press F8 at startup, choose "repair your computer".
  and follow the instructions in the menu.
  Then the HARD drive will be formatted so back up your data.

• I can't update my pc Windows vista Home premium. 80072EFD error code appears.

  After it has downloaded about 11% error code 80072EFD. Also when I try to downloadupdates through website windos my microsoft InternetExplorer says that I lost the connection when downloading any product microsoft WHY does? Help, please

  HELP Please! I've not updated successfully for 11/08/2009

  Hello

  "If you receive error 80072efd Windows Update for updates, the cause may be a high number of requests to update on servers Windows Update. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for Windows Update to run at the next scheduled time. »

  You can see the above information and the possible resolution under this link:

  Windows Update error 80072efd.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

  Thank you.

• My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

  My computer has Windows Vista Home Premium 64 - bit operating system.  When I try to get updates, there is an Error Message Code 8000 ffff.  How fix/resolve this problem?

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
  http://support.Microsoft.com/kb/946414

  How to reset the Windows Update components?
  [Launch the difficulty mode by default and aggressive , if necessary]
  http://support.Microsoft.com/kb/971058
  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

  Original title: help with error message... Please...!

  I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

  I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

  I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

  Moved from Vista programs Forum.

  You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

• Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.

  Windows Vista Home Premium SP2 32-bit not updated, the error code 80070005.  Have tried little about everything without success. AV is Microsoft Security Essentials, Norton has preloaded, ran Norton total clean. Don't know the last updated time to race day, I re-load of updates (right term?) who cleaned the logs.  Have the free version of Malwarebytes, run regularly, nothing comes.

  Fixed, had run as before, but didn't save Subinacl desktop instead of folder mentioned in fix

• I tried twice to install the KB2754670 update every time install failed with the error code 646 can help? I have Windows Vista Home Premium edition

  Update Windows cannot install KB2754670 twice showed error code 646. Can someone help? I am running Windows Vista Home Premium edition.

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  UTC/GMT is 01:26 Sunday, October 21, 2012

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but he is not giving facility haven't faced error I tried to do one by one, but do not install it

  Abdoulaye recently I received 3 important updates for my windows vista Home premium (my knees is dell inspiron), but there is not installation giving error code (643). Even I tried to do one by one, but do not install it

  Hi HazemRagab,

  Failed to verify who has had updates to install. Follow these steps:

  Start, all programs, windows update, view the update history

  Follow the steps in the article.

  http://support.Microsoft.com/kb/976982

  Reference: http://support.microsoft.com/kb/2545723

• Windows Vista Home Premium-reinstall using disks OEM, error file missing

  My existing plant from my factory installed DVD Windows Vista Home Premium will not reinstall reinstall disks.  I get a missing file error.  The existing facility is a Service Pack 2 (service pak 2 update).  This software has been installed on my 2007 Dell Inspiron 6400 laptop.  Looking for suggestions, i.e. request a new copy of DVD disc?  Request a download from the microsoft Web site?  Should I use program reformat to remove the installation of the plant and try to reinstall?

  My existing plant from my factory installed DVD Windows Vista Home Premium will not reinstall reinstall disks.  I get a missing file error.  The existing facility is a Service Pack 2 (service pak 2 update).  This software has been installed on my 2007 Dell Inspiron 6400 laptop.  Looking for suggestions, i.e. request a new copy of DVD disc?  Request a download from the microsoft Web site?  Should I use program reformat to remove the installation of the plant and try to reinstall?

  Hey renbob91

  Microsoft cannot help you with acer dell oem vista DVD replacement etc.

  Contact dell for them to send you an if necessary REPLACED recovery disk

  and you are using a recovery disk dell, you will need to contact dell for recovery vista problems as is the process of recovering dells not microsofts

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&l=en&s=Gen

  Walter, the time zone traveller

• Validation in Windows Vista Home Premium at the start: errors and complications.

  I was directed to this forum as a last chance for my situation.  I'll copy what I wrote before:

  First of all: I can't run Microsoft Genuine Advantage Diagnostic Tool.

  With that of the road, I'll try to explain my situation.  Earlier today, I ran in the hope to get rid of some unnecessary files in disk cleanup. Well, he eventually delete most everything out of my C: drive.  So I ran a restoration of the system to an earlier time.  After the restoration, I tried to connect but received a box saying that my Windows Vista Home Premium product key is not valid.  They gave me three options:

  Reduced functionality mode (does not work; see below)

  Enter the product key

  Contact HP - do you have this: they wanted $ 100.

  Now before to get started by offering suggestions, you need to get more information.

  I can't use the reduced functionality mode.  When I click on it, an error with file not found window appears.  The only way I can access my desktop is by going into safe mode, and I can't go in safe mode with network.  So based on this little bump in the road, I was not able to use the tips I found online, because none of those working in safe mode.

  Now there is more.  Frustrated, I tried to follow guides anyway.  So I followed the following steps:

  Step #3 game

  (1) open Internet browser

  (2) Type%windir%\system32into the browser address bar.

  (3) find the CMD.exe file

  (4) make a right click on CMD.exe and selectrun as administrator

  (5) type: net stop slsvc (it may ask you if you are sure, click Yes)

  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing

  (7) type: Rename tokens.dat tokens.bar

  (8) type: cd %windir%\system32

  (9) Typenet start slsvc

  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)

  (11) restart twice

  Not only that not solve my problem (since I was in safe mode I was refused permission), but it has created a new problem.  Now when I start my computer normally, IM is more given three options (reduced functionality mode, enter a product key, contact HP).

  Instead, when I log on, an error pops up saying: "Insert the Windows CD or installation DVD into your computer to begin the process of resettlement." Now, my computer was shipped with windows and everything installed by the factory with the sticker on the side of the tower.  I have no Dvd or Cd.

  I've had this computer for almost 3 years and I can not lose what I have on my computer. I have a genuine copy of Windows.  I have no idea what I'm supposed to do now.

  I used these links:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/3561f32a-d581-4DBD-b90e-fd680f970258/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/c9340e5d-7efb-4edd-B256-defa6b997062/

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/ae720c35-3C91-4f07-85AD-82d99297cb11

  and many others that I can't find my way.

  I am posting this from my laptop not my computer with the problem.

  Here is the link to the original thread:

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/6b962e8b-ff83-4b4d-a3bd-c7d9a8dc2471

  Is it possible that I can fix this?  Can I install Linux or something, just so that I can access my files?  Thank you.

  Hello
  
  Since you are concerned about the data on the drive, I suggest you first backup of data.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files
   
  I recommend you contact the manufacturer of the system to help about it.
  http://h30434.www3.HP.com/
  http://welcome.HP.com/country/us/en/support.html
  http://welcome.HP.com/country/us/en/contact_us.html

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.