Windows Vista-press to continue
Original title: vista has been designated the cenyury flop yet?
Press to continue
Hello
We cannot help you if you do not validate your problem in an appropriate manner to get help
Please read this:
How to ask a question
http://support.Microsoft.com/kb/555375
-What you trying to do?
-Why are you trying to do?
-Do you try already, why and what was the outcome of your actions?
-What was the exact error message you received?
-How long have you been experiencing this problem?
-Have you searched the relevant forum/newsgroup archives?
-Have you tried all the tools or KB articles or other resources?
-Have you recently installed or uninstalled any hardware or software?
-What changes have been made to the system between the time where everything has worked, and when you noticed the problem?
Tags: Windows
Similar Questions
-
Windows Vista update runs continuously
Update of Windows Vista has not been completed since mid July 2016. Manual start and it works continuously without finding anything or finishing, I read on internet to clear the cache I've done (loss of the history of the update), but this does not resolve the question can someone move me to a solution that works?
-
Three Windows Vista security updates continue to fail every time.
Three Vista updates fail every time Windows Update tries to install. They seem to settle in Windows Update and then require a reboot to complete. During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."
These are the updates:
Update security for WIndows Vista (KB2691442)
Update security for WIndows Vista (KB2655992)
A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)
I tried several times with the same negative result of "failing".
I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.
Suggestions?
Thank you!
The link below has options to solve your problem of loop.
UTC/GMT is 19:41 Saturday, August 4, 2012
-
Will not install SP 1 for Windows Vista error code 800706BE.
I try to install Service Pack 1 for Windows Vista and it continues to fail with the error code 800706BE and then my security/antivirus software detects a trojan virus. What can I do? As I would like to download the trial version of Office 2010.
Just open the program (it may be possible from the notification area icon if you have an or there should be an entry in the menu start / all programs for the program) and most of the AV software that I have seen or used the option clearly identified on the main screen or another primary screen if there are tabs or on a toolbar or at worst a deep layer in the options bar menu. If there are options, clear all.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Currently running XP, are there upgrades Windows Vista still available
I was wondering if Microsoft has Windows Vista updates always available? You want to upgrade to Windows XP.
Yes, but if your computer will support it, you should really consider Windows 7. Windows 7 Upgrade Advisor
Microsoft itself does not sell Vista as a retail sales point, but he said: «visit your local retailer or online to buy a PC with Windows Vista.» We are still selling Windows Vista and will continue to provide support for it. »
For example (but be careful, some of the cheaper offers can be either non-authentic or most likely the OEM versions that are only legal for the first computer on which they are installed).
-
Windows Vista SP1 installation
After a crash will recover and put everything back in order, I could not install Windows Vista SP1. Continually says auto update this update is available, but after downloading and a Setup attempt is made, in a few seconds, it says 'Setup is complete. However, it is never appears on the updated list and continues to display on an automatic update.
Hello
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Direct download;
SP1 32-bit
SP1 64-bit
clcick start - right click on computer - properties - see what version of bits you have
____________________________________________________________________
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Windows Vista continues to try to connect to the VirtualProfile in network connections.
I was helping my brother set up its new Netgear Wireless USB adapter in Windows Vista and kept running into the same problem. Once the adapter has been installed, Vista would continue to try to connect to a VirtualProfile under network connections which would interfere with the connection of the profile. I had my brother take the VirtualProfile and then it connected correctly. However, after each reboot, the connection of VirtualProfile appears every time and we need to start over the process. A way to remove this VirtualProfile permanently and why what is happening? Thanks for any input.
original title: Wireless Virtual Network profileHello Flash4,
Thank you for choosing Microsoft answers forum for Windows Vista.
I suggest you go to your network card making and download / install the latest drivers.
Also I suggest that you check your system for corrupted files. You use the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:
1. open an elevated command prompt.
2. to do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
3. type the following command and press ENTER:sfc/scannow
The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Hope this information is useful.
Thank you.
-
Windows vista family premium sp2 print spooler continues to stop
I can't keep feeling close spooler tried Mr. fix and still nothing.
Hello
Thanks for posting in the Microsoft Community.
I understand that print spooler continues to stop in Windows Vista.
Please follow the steps.
(a) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.
(b) double click on "Printer Spooler" in the Services list.
(c) click on stop, and then click OK.
(d) click Start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.
(e) click Start, type "Services.msc" (without the quotes) in the search box and press ENTER.
(f) double click on "Printer Spooler" in the Services list.
(g) click Start. In the Startup Type list, make sure that "Auto" is selected, and then click Ok
-
ORIGINAL TITLE: Vista problems
Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.
Hello
What is the exact error message related to the windows registry?
I suggest you follow the steps mentioned below:
Method 1:
Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.
Method 2:
Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 3:
If the previous step fails, follow the steps in the link:
-
In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?
My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.
0X800719E4 ERROR_LOG_FULL
The log space is exhausted.Transaction for Windows Update logs may be in an inconsistent state.
You can delete them by clicking the ORB start.
In the search for cmd field type
Right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.At the prompt, type in the below exactly as written, including spaces, pushing enter after each command
CD /d %SystemRoot%\System32\SMI\Store\Machine
attrib s h *.
del *.blf
del * .regtrans-ms
outputRestart the computer now and see if it can be updated.
MowGreen
Expert in Windows IT Pro - consumer safety* - 343-* FDNY
NEVER FORGOTTEN -
Windows Vista Home Premium 64-bit loop continues!
After spending 3 days reinstalling Vista and all of my programs after that my PC has crashed, Windows updates began and continues to stop, restart, stop, restart... Etc! ("CONFIGURATION of UPDATES 3 of 3-0% COMPLETE") It does not move 0%! I had 3 Restore Points, but it says that I do not have? I tried to start in safe MODE, but just to get a screen of scrolling files BACK! I tried to fix IT but it found no problem starting? How can I enter my office and use my computer? I am most reluctant to reinstall again after having spent so much time reloading programs! I used my XP system to enter in my drive C 64 Vista and checked Windows Update files and found a lot of mistakes which mean nothing to me! I tried to attach the files here, but it did not work. Any help appreciated.
Thank you
Louis
psvpilot59,
Take a look at this article as it covers the issue you see. Post back with the Info requested PA porter and the results of troubleshooting in this article.Vista update stops at stage 3 of 3
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I continue to be ask to install an update: when I do I get this error message every time... WindowsUpdate_00000646""WindowsUpdate_dt000"
I use windows Vista
Hi Phdshrink,
Who is the update that you are trying to install and you get the error?
You can download the update in the given below link and install the same in administrator mode and check what is happening.
http://catalog.update.Microsoft.com/v7/site/install.aspx
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I tried to upgrade to Windows 7 Vista SP1 from a disk of retail bought at Costco. I received an unsuccessful installation and everything seems to be ok with a rolling Vista. I woke up this morning to my system stuck in reboot mode. I can't even Windows Safe Mode to work. What can I do to get back to Vista? I promise you that I'll never try to update again... Please help.
Hi HelpPleaseWindows7,
Thanks for visiting the site of Microsoft Windows Vista Community!
(1) remove any external devices like floppies, CD, flash, printers and computer DVD drives and restart.
(2) If this helps not to start your computer, use the Vista installation cd
(3) try to get the error message by disabling "auto restart in case of system failure"If you have a Windows Vista installation disc:
Insert the installation disc.
Restart your computer.
Click the Start button, click the arrow next to the button lock and then click on restart.
If you are prompted, press any key to start Windows from the installation disc.
Note
If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
(BIOS WARNING):
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk).
Choose your language settings, and then click Next.
Click on repair your computer.
Select the operating system you want to repair, and then click Next.
In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
If the Startup Repair tool is an option of recovering preinstalled on your computer:
Remove all floppy disks, CDs and DVDs from your computer and restart your computer.
Click the Start button, click the arrow next to the button lock and then click on restart.
Do one of the following:
If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.
In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).
Select a keyboard layout, and then click Next.
Select a user name and password, and then click OK.
In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
Follow this link for more information: http://windows.microsoft.com/en-us/windows-vista/Startup-Repair-frequently-asked-questions
Perform the system restore
Follow this link: http://windows.microsoft.com/en-us/windows-vista/Turn-back-time-on-your-PC-Undo-system-changes-with-System-Restore
I hope this information helps!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think. -
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. Soon, I discovered that I was getting conflict on my computer and he discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
I had to have my hard drive replaced and the company that made him put two versions of 32-bit and 64-bit Vista Home Premium on it. I soon discovered that I was getting conflicts on my computer and discovered that the two were on the hard drive. I'm trying to upgrade to Windows 7, but I'm at the stage where it tells me to seek answers on the removal of Windows Vista so that the upgrade can continue. He says that I can not upgrade both on the drive. I know the other option is to do a clean business, but I would avoid this possibility if possible.
need an answer as soon as possible... Thank you
Hello
The best way is to clean install and start over.
In addition, it is not legal to have both installed version that the license is for a single installation.
If it is a dual boot with 32 bit and 64 bit installed on different partitions, there would not have been the conflicts you would have never started in one or the other.
See you soon.
-
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?
Hey PeLon416
If you have problems with the gateway recovery process, you will need to contact Gateway
It's their recovery process not microsofts
You may have a hardware problem
support of bridge at the link below
http://support.gateway.com/support/default.aspx
Walter, the time zone traveller
Maybe you are looking for
-
Satellite P70-B-104 - installation 'own image of recovery' is possible?
Hi all I am a new owner of a Toshiba Satellite P-70-B-104 and I have a question about Toshiba recovery options.Is it possible to preform a resumption of so-called "clean" image so that the computer is only to install the required windows software and
-
Support of Windows XP Home for Satellite L655D-133
I would buy A Toshiba L655D-133, but I need to know that the drivers are available for Windows XP, if anyone knows, I would be very grateful.
-
Configure the playbook Simulator
Hello I just downloaded the playbook Simulator and I see it's a vmx file. I have to pay for a license of VMWare? Thank you. JB
-
New window (active Frame) of the API File Path coverage helps
I'm still learning, but I can't understand how to deliver the active location of my frame image in the new window cover api. Here's my function that is called from the entercover event listener. The image is a jpg in the images of my webworks app f
-
BlackBerry smartphone White screen while mobile is activated and the BB Desktop connection
My bb8900 shows white screen when I yook it my pocket it shows connected with BB Desktop I have updated its software as well but question remains the same only white screen shows the mobile please help