Satellite P70-B-104 - installation 'own image of recovery' is possible?

Hi all

I am a new owner of a Toshiba Satellite P-70-B-104 and I have a question about Toshiba recovery options.
Is it possible to preform a resumption of so-called "clean" image so that the computer is only to install the required windows software and Toshiba software without third-party software such as norton, adobe, etc.?
I have not found this option after pressing the zero key during startup.

Thanks for your help.

Best regards

Sir_K.

Unfortunately this option does not exist and it is not possible. Anyway, I don't see a problem with it.
No one force you to use all these stuff pre-installed. After installing recovery image, you can remove all additional software system.

Tags: Toshiba

Similar Questions

  • Re: Unable to record any sound on my new Satellite P70-A-104

    Hello

    I bought Toshiba Satellite P70-A-104, model PSPLPE-006008FR. In this computer, there is a soundcard: HD SmartAudio Conexant, HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5113 & SUBSYS_1179FA71 & REV_1001.

    I have used audacity, but I can't record any sound because the audio mix function is not available on this map. I right click on "speaker" then right click on the sound of Windows to select 'View devices turn off' but nothing appears.

    Someone knows what to do?
    Thank you

    This free audio editor and recorder are unknown to me, but I would like to know if you can use Windows sound recorder and use the internal microphone for recording. With other words to see if registration option works in general.

  • Satellite P70-A-104 - no available in Windows virtualization technology

    Hello
    My problem is that Intel virtualization technology is not enabled on my Toshiba Satellite P70-A-104. I have selected in Bios options: Virtualization VT - X only, but in windows 8 x 64 Technology intel fact processor detection utility appear that any virtualization technology are available.

    On this page http://ark.intel.com/de/products/75117 says that my processor (Intel® Core i7-4700MQ) supports Intel Virtualization Technology (VT - x).

    But why is it not available / supported in windows?

    Hello

    > But in Windows 8, the Intel processor detection utility detect no technology virtualization on my computer.

    The VT - x is supported by CPU and it s enabled in the BIOS. So everything should be clear here.

    You wonder why utility detection Intel CPU does not see the VT?
    I put t know.

    Is this CPU supported only * VT - x * but can't stand not * VT - d *.
    The Intel HM86 chipset supports both: VT and VT - d

    To be able to use the VT, support CPU, chipset and BIOS is necessary, and this support seems to come from the parts mentioned.

    Maybe the Intel CPU detection utility provides information about the VT - d

  • Satellite P70-A-104 - cannot find webcam driver for Win 8.1

    Hello

    I installed a 2nd HDD with Win 8 Pro 8.1.
    I've also downloaded all the drivers available for my model P70-A-104, but there is no driver available for the built-in WebCam FHD Toshiba. I also checked the other models from Toshiba with camera of 2 MBit FHD.

    Is there someone who knows where to download the correct driver? I know there are some tools for the driver updates (25-30 US$), but they do not display the missing web cam driver.

    Your

    As much as I know there is no webcam driver for Win and no driver webcam for win 8.1 because s webcam notebook module is controlled by internal Microsoft driver provided with 8 Win / Win 8.1

    Question: do you have any yellow exclamation point in Device Manager? I guess that the webcam is listed here...

  • What docking station / Port Replicator is compatible for the Satellite P70-A-104

    Hello

    does anyone know what model port replicator (name of Toshiba for docking station?) adapts to Toshiba P-70-A-104?

    Your
    Stephan.

    Hello

    As far as I know that this Satellite has port replicator, so you can use an external device, such as Toshiba Dynadock (universal docking station).
    More info about Dynadock you can find on the pages of Toshiba. As a small preview check please
    http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa5082e-1PRP/
    http://www.Toshiba.EU/accessories/laptops/docking/universal-docking/pa3927e-1PRP/

    If you have any other questions you are welcome.

  • Satellite P70 - A - installation of Win Pro 8.1

    We have acquired satellite computer p70 laptop with pre-installed windows 8.1.
    On the other hand, we bought a license for Windows Pro 8.1

    We install the original DVD delete old partitions, but when installing or just ask the license number and even if I have to install the drivers and another aparecion as follows version 8.1 no more.

    We have looked in the BIOS, but do not see the option to turn off to do a clean install.

    Thank you.

    The entire display is a little confusing for me, but try to take certain concrete steps of what needs to be done.

    Each laptop comes with OS preinstalled recorded original image of recovery on the HARD drive, so before anything else, you need to create a recovery media with the original version of the OS. After having done that, you can change anything you want. Using the recovery disk you can preinstall original picture of recovery again and have laptop with factory again. If I understand you right didn't make this recovery disk is your mistake.

    Anyway, if you want to install own OS you must change the UEFI BIOS settings and enable laptop to boot from ODD and install the new operating system. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

    After the operating system installation clean all drivers necessary, tools and utilities you can download from http://www.toshiba.eu/innovation/download_drivers_bios.jsp

    Check it out.

  • Satellite P70 - A - recovery/transfer on different drive system

    Hello
    I buy a new drive SSD and Satellite P70 - A - 10 L. Operating system (Win8) is located on 1 TB of HARD drive. What should you do to transfer the system to a new disk? or how to retrieve it on SSD HARD drive instead?

    Apo86

    All about recovery image and recovery you can read in the document s user manuals. You will find information you need to create a recovery media. Need DVD or USB.
    You can't just copy recovery image to another SSD or HARD disk and later to begin installation of recovery here.

    You must create media recovery bootable utility preinstalled Toshiba Recovery Media Creator.

  • Satellite C660 - can I use own Win7 without Toshiba bloatware?

    Hey,.

    So basically I have a Satellite C660 and it came with an iso on the D drive. So, whenever I need to clean my system I use the iso of the d drive and it will be like new again. However I hate all this toshiba bloatware, that settles and all the other stupid stuff, so I was wondering if I have a disc of windows 7 and as started the laptop from the drive and installed windows 7 from her without all the stupid stuff, everything would still work as usual? or what?

    Thank you.

    In General, you can do with your computer laptop all you want, and nobody don't require you to use preinstalled stuff. You can install Win7 clean version and if you install all the necessary drivers it works without any problem.

    Please note: for this own Win7 version you must have a valid license for the product activation and before starting the installation create recovery for recovery image back-up DVDs. After installing Win7, you will not be able to start the installation of HARD drive recovery image.

    What I do and can also recommend to you and all other people, is the optimization of operating system pre-installed. Use original Win7 but remove things you don't need. After doing this you will have original, activated the OS that will run more quickly and without unnecessary stuff.

  • Adding a new SSD on Satellite P70-A-107

    Hello

    Recently bought a Toshiba Satellite P70-107-A. It has a 1 t HARD drive and another empty location where I can put another SSD or HARD disk.

    I already have orderedt an SSD (840 pro) and I think puts it in slot 1 with the system and put the 1 t HARD drive in slot 2. I created a usb media recovery with Recovery Media Creator Toshiva with the recovery of the computer image.

    My question is: can I just put the SSD in slot 1 and to boot via USB and make recovery directly on the SSD? The bios will recognize the SSD?

    I need to install any drivers for bios recognize the SSD?
    Also heard that it was necessary to activate the AHCI, but I don't see this option in the bios.

    Thank you.

    If you have the original recovery media, I think that everything should be OK.
    Only put the SSD and then install original recovery image. When it's all over and the operating system is installed properly, you can add second drive.

    When you put the new SSDS go to parameters of the BIOS, check if the SSD is recognized correctly, the value of the BIOS default settings and continue with the installation of the OS (original recovery image).
    Please post comments.

  • Satellite P70 - how to use the second HARD drive?

    I have recently bought a satellite P70 - A - 10 d.

    I see that there is no second location on hard disk, so I can install a second disk.
    You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

    But I can't understand how screed the disc.
    Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

    Hello

    If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

    Welcome them

  • Satellite A200 - burn image HD recovery discs?

    I'm working on a Satellite A200, who does not the recovery discs and now seems to have one messed up the Vista installation.
    Before I started working on this, I created images of backup hard drives 3 partitions (C:\, TOSHIBA SYSTEM VOLUME & HDDRECOVERY) which I backed up on another computer.
    My question is, can I create these images recovery discs? The machine boots, they are saved on triple XP, Vista & W7, they were created using ShadowProtect Desktop.
    I can mount the images in each operating system...

    As far as I know this can be a problem now. Recovery media can be created when the laptop to factory settings. This means that available "Toshiba Recovery Disc Creator" tool and recovery image placed on the second partition.

    When you move this image of recovery elsewhere and return later, sometimes "Toshiba Recovery Disc Creator" cannot find files and more.

  • Satellite P70-A-L1M: adapter CA / CC / grounding question

    Hello.

    I have the same problem with my Toshiba Satellite P70-A-L1M described [you: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67785]

    There power adapter 2 poles with 3 pins, everything is fine already cheked with other adapter from another Toshiba laptop (with the same power and voltage).

    So, I wrote a letter to support the local customer Toshiba (in Russia, in fact), but they refused to change adapter (well, because it's the Russia ;)).

    In addition, they refused to help in any way, or just to answer, is this normal or not (in my opinion, new cell phone buzzing for $ 1500 price IS NOT normal).

    So, nobody knows, maybe there are other options to resolve this matter through any authority higher than market local support Toshiba?

    Thanks in advance.

    Hello

    (> in my opinion, new cell phone buzzing for a $ 1500 Prize IS NOT normal).

    It is completely normal and nothing unusual for each laptop with metal case that is plugged in power without grounding.

    Here you can find a detailed article on the CNET page on similar small electric shocks using Apple Mac.
    http://reviews.CNET.com/8301-13727_7...AC-shocked-me/

    In General, this is not a technical failure of the AC adapter.
    This 'shock' is the result of the flow of this alternative leakage current on the body of the user, and this causes a slight tingling.

    But as mentioned, a 3 PIN adapter would be a workaround for this problem to the ground.
    But this isn't a case of warranty since this isn't a hardware malfunction and the only option is to buy this adapter 3 AC alveoli.

  • Toshiba Satellite P70 - response about the service of warranyt

    Hello
    I have a Toshiba Satellite P70. Unfortunately, it was a failure. I reported the accident on the Toshiba site two weeks ago. To date I have not received response. How long I'm going to wait for a response and repair?

    My patience is running out... Failures reported on 16/01/2016. G1G1MW0021 repair cases. The laptop is still broken in my house. Customer service is a total failure. How long I have to wait? Month and year?

  • Drivers for Windows 10-Satellite P70-A-120

    Hello everyone.
    I have problems with my Satellite P70-A-120, I can not find drivers for Windows 10. Now I have a problem with the bluetooth connection, all devices to show me "Retribution" (unknown).
    Excuse my English...
    Thank you and greetings from Spain

    Here you will find the drivers for this model.
    http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  • Satellite P70-A01C in World of Warcraft frame rate is LOW

    Bought this laptop a few months as a game machine.

    Said he would go to more recent games with little drama, but I have problems with World of Warcraft. Even with a quad core processor, 16 GB of RAM and a 4 GB graphics card I sometimes 9-12 fps.

    This is usually when there is a lot of things, like during a raid, but, nevertheless, with these specs this computer must be able to manage. Normally I get around 80-90fps and I get similar on my desktop PC (quad core, 8 GB RAM, 2 GB graphics card).

    Suggestions as to how I might solve this problem?
    I always have the latest NVIDIA drivers installed and keep all the rest as well up-to-date.
    I wonder if I missed something!

    Thank you.

    Laptop specs page provides information about the integrated hardware laptop.
    http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01c002/specifications

    _It sys: _
    + * Graphic * nVIDIA GeForce GT M 745 4 GB with Optimus and Intel® HD 4600 graphics card +.

    NVidia Optimus technology passes between the external graphics chip (nVidia) and including graphic internal to the CPU (Intel® HD Graphics 4600) in order to save power.

    In my opinion the slow pace could be related to the graphics chip that is used by this game. Maybe the game uses the graphics card Intel HD instead of GPU nVidia?

    If you want to know how to switch between nVidia and Intel, check this short youtube clip:
    https://www.YouTube.com/watch?v=Zh4HCadTY_A

Maybe you are looking for

  • Alarming low install black cartridge. Have already installed XL Black

    I have a Photosmart 7520. He still has the black ink cartridge "setup" and it is originally an alarm of ink - all others are XL cartridges and all have more than 75% ink remaining... I can just leave this empty niche or do I need a standard black car

  • Error trying to download windows updates

    I get error 802400B other updates being installed as an error when I try to download the updates that I received notice. My system has been arrested several times and I don't see anything that indicates to Windows is loading. Please help tell me how

  • Configuration of the Windows stuck at 67% updates then restarts and the entire process loop

    Original title: configuration of updates My computer starts to try to configure Windows updates immediately I turn it on and gets to 67% and no further. Finally, it restarts and start the process again without success. All this takes 11/4 hours befor

  • E-mail from hotmail problems

    I have problems to open emails from hormail. I click to open them and they go straight into the box.

  • Mouse and keyboard lagging

    My keyboard and mouse began trolling about a month ago.  Now latency is up to two seconds at a time. They have worked well for the first 3 years. The keyboard is plugged in and that the mouse is wireless. I am running windows 7 on a desktop computer.