Windows Vista SP1 installs, not anything else

Similar Questions

• Windows vista sp1 installation problem

  Hi, I downloaded windows vista sp1 and at the end of the installation, it fails and says pass (http://go.microsoft.com/fwlink/?LinkId=69157) that is not valid. My windows update cannot also instal or download it too. My laptop is a sony vgn-sz433N/B and I have this problem even after full recovery my pc. Please tell me what to do?

  Hi esakhani,

  Thanks for posting your question.

  Due to Windows Update, you can try running a Fixit tool from the link below:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  After you run the Fixit, in order to install Service Pack 1, you can follow the procedure:
  -Download and install the latest Windows Update Agent:
  http://support.Microsoft.com/kb/946928

  -Run the computer system preparation tool.
  http://support.Microsoft.com/kb/947821

  -Download the stand-alone package for the Service Pack 1 from the following link:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  -Turn the computer in clean boot mode.
  Disabling/uninstalling security software installed on the computer, as appropriate.
  -Launch the installation of the stand-alone package of SP 1 to the clean boot.

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Vista SP1 installation

  After a crash will recover and put everything back in order, I could not install Windows Vista SP1. Continually says auto update this update is available, but after downloading and a Setup attempt is made, in a few seconds, it says 'Setup is complete. However, it is never appears on the updated list and continues to display on an automatic update.

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Direct download;

  SP1 32-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

  SP1 64-bit

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7&displaylang=en

  clcick start - right click on computer - properties - see what version of bits you have

  ____________________________________________________________________

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How to install a theme on windows vista SP1 (do not accept .themepack)

  I want to install a theme on my vista. I read that vista theme are compressed as an extension of .themepack file but my vista doesn't have the ability to install the .themepack files, I got my http://www.winthemepack.com/call-duty-windows-theme/ theme I installed it and...

  Any help please?

  Alexander,

  Please contact the Microsoft Community.

  I only see the answer from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/how-to-install-themes-for-Windows-Vista/e816bd99-53af-439e-888C-50d1ee77b311

  In addition, I would like to that refer you to this article as well-

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Let us know if it works for you.

• Error 0 x 80070002 Vista SP1 installation.

  I tried to download windows vista sp2, but before it can be installed, a windows vista SP1 must be installed first. windows vista sp1 installation cannot proceed this error OX8007002 beak. pls help me what should I do now because there is no more support for windows vista sp1?

  original title: problems with my Windows Vista

  Hi Czarihm,

  You can try these steps and see if it helps.

  Method 1:

  You can read the following article to run the system update readiness tool and check if you can install Vista SP1.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Method 2:

  After you run the system update tool, you can try to install the stand-alone package for Windows Vista SP1.

  How to obtain the latest Windows Vista service pack

  For more information, you can also consult the following articles:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Windows Update Error 80070002

  Hope this information is useful.

• My computer will not download windows vista sp1

  I tried the update of windows vista sp1, and it continues to fail. I even tried manually upgrade and still nothing. I recently bought an external hard drive and I thought that I formatted it to my pc and mac. Well my pc does not recognize it because sp1 is not installed. I can't yet do a clean restore and download windows vista because I don't have the CD. Is there anything I can do to receive sp1. I see that many people have had this problem.

  Hello

  How have you tried to manually install SP1?

  SP1, SP2, and then should be installed years ago

  ___________________________________________________________

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  @@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista.

  You can contact your computer manufacturer and ask them to send you a set of recovery discs, IF it is still available.

  They should do this for a small fee.

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Repeated installation of Windows Vista SP1 in Windows Update and fake notification of successful Installation.

  I was using Windows Vista Home Basic 32 bit OS in my Dell Inspiron 1501. The operating system is preinstalled and Windows Update updated to SP2. But recently an unknown problem has occurred and my laptop cannot connect to the internet. As no reason was found, experts have advised the reinstallation of Windows Vista. I reinstalled Vista by running the operating system provided by Dell with my laptop DVD. The laptop started to connect to the internet normally.

  I started to receive an update to Windows Vista SP1. I installed it. Installation has suddenly didn't have that about five minutes and the computer also has not restarted several times on its own as expected. At the end of the Windows Update notification "Update" successful installation Update history shows also succeed installing SP1. However, I am receiving the same updated daily and installed in exactly in the same way with the same result. After installation, the Windows version does not display Windows Vista Home Basic SP1 but only Windows Vista Home Basic. What should I do?

  I had the same problem and it really irritated me. Even when you install SP1, and he says there are successful (takes like 1 sec inst) and you click on updates search is there once again. He said in the story who is has been installed, but is not there, when I tried to install SP2 maually it is said first install SP1, and then I tried to manually install SP1 and it says that I have already. But if you go to start > right click on 'computer' > properties it does not say you have SP1. So here's what I just did and now it worked and SP2 as well.

  When you click on the support link that he gave u get the ability to run a thing 'fixit '. That run. And it still didn't work. (read everything in the support page) Then I went on this link and ran the virus Hunter MS. Nothing was found, problem still there. so I ran again the file 'fixit '. (twice he said them that something was fixed.) then I restart my computer and tried to install the SP1 Setup again and it worked perfectly :) then SP2 and it worked as well manually. and he has actally took like an hour to install. maybe try, worked for me. lol, don't know what measures was unnecessary, but it worked. You can download the SP to install it manually, simply google "manually install SP1/2 for vista" or something and download it.
  Sorry for the bad grammar/spelling. In a hurry, lol. I hope that you manage!
  (if the link does not IE - http://www.microsoft.com/security/scanner/ )

• I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

  Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

  I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

  Please answer these questions:

  It shows in system properties?

  To open system properties:

  (a) click Start, right click on computer

  (b) click on properties

  (c) see if it shows Windows Vista with service pack 1 on windows edition.

  Hope the helps of information. We know if you need help. We will be happy to help you.

   

• "Successful" installation of Vista SP1 is not successful

  My gateway GT5662 crashed and was finally restored, but lacked the SP1. Automatic update of Windows was used and it was assumed that it was on. But auto update he kept raising. After 'successfully' several times installing the Vista SP1, it does not and continuous automatic updates to download. Wish I had SP2 so that I could update to IE9 and maybe even Windows 7. What is my solution?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Do not install Windows Vista SP1 with error 800F081F

  My computer has window Vista Home Basic 32-bit operating system.
  I try to install Windows Vista SP1, and opinion on the recording of history that Windows tried to install automatically it but not all the time. The error code is 800F081F. I need to install the SP1 and SP2 to install my new software "PeachTree". Help, please.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  You need a disk FULL/license to do a clean install, not an upgrade license.

  Take it back to Wal-Mart and see if you can exchange it.

  See you soon. Mick Murphy - Microsoft partner

• Windows Vista SP2 installation error loop (x 64) 0xc0190036 error number

  Hello, after installing SP2, I constantly make the same mistake, the bad thing is, insteath to back off, the SP2 update keep trying on and again and again to change the file that contains an error (file checks! error 0 x 00190036 mshtml.tlb!).
  now... I think that microsoft really screw them this time, because the installation program runs in any mode of windows, that is to say, cannot go to safe mode to attempt to recover from there, it's just again ONCE the attempt to install the sloppy SP2, restart the computer does nothing, as the update again will activate itself , so I always end up stuck in this part of the file with this error code mshtml.tlb (it continues to blink constantly as his try again and again access the file)

  Specs: Windows Vista SP1 Ultimate x 64
  GA - X 48 - DS4
  Q6600 @ 3 Ghz Kentsfield.
  4 x 2 GB (8 GB ddr2 800 Mhz)
  Sapphire Hd 3870
  2 x Western Digital Caviar (500 + 160 Gb) + Seagate 250 GB
  Sound Blaster Audigy 2 Zs

  Previous mistakes: I could never install IExplorer 8, it still reported a similar error, but with the ieunit file (don't remember the exact file currently extension)

  so the question is: will there be a fix for this problem? or do I just simply restore and try to recover manually in the hardway (Ie, run the Vista cd repair tool)
  im not wanting to use the repairtool, because he already ruined an once installation after a poor pass from windows update.

  * edit *.
  just to correct the incorrect error code, the correct error code reported is: 0xc0190036

  Sometimes the error is then replaced 0 x 0190002 then 0xc0190005 when stopping down.

  Note that I am on windows vista ultimate SP1 x 64 = programmer Noob =-

  Hi Tamalero,

  You got the error message indicates that mshtml.tlb is damaged and there is one possibility of other files system is corrupted as well. All what we need to do is to rename the DLLs corrupted, restart the computer and let start the computer normally to complete the installation. Follow these steps to rename the corrupted dll file.

  (1) Insert the windows vista dvd and boot from the dvd.

  (2) select repair your computer.

  3) click on command prompt

  Type the following commands and press ENTER after each line

  C:

  CD windows

  CD system32

  Mshtml.tlb.old mshtml.tlb Ren

  (4) output from command line

  (5) restart the computer and boot up normally

  If you GET the black screen with a similar error and one different (other than mshtml.tlb) file, make a note of the dll file, repeat steps 1 to 5 and type the name of the file in step 3.

  Restart the computer. It may take a while and you will be asked to connect to the desktop computer.

  Check in system properties if SP2 is installed.

  I hope this works. If you still have problem please do after back...

  Thank you.

  Hi error_counter here:
  do a "repair" is only starting problems, and once they are solved, the problem persists (mshtml.tlb error)
  I tried to remove this file, but then the error from 0xc01900036 at 0 x 000034
  so I'm stuck again, I don't know why the file mshtml.tlb is really important to "detect" If service pack updates it anyway.

  and like I said, even though vista windows SP1 supposedly has DONE a system restore point, no system restore points were detected by the dvd (one of the things that I hate about Vista than their restore points are a draw, and you can get by no unnecessary work anytime..)

  the thing which allow me to return back to SP1 followed the instructions of another post here, related to the error 0 x 000034 in this forum but for SP1.
  I went to the c:\windows\system32 directory and renaming of software files, security, SAM and default and replace them with copies of the REGBACK folder in system32\config
  It could back me to SP1, unfortunately a quirk stuck me then in an infinite "configuration updates 3 of 3" forever time it boots (it restarts itself after a few days). and had to delete pending.xml file

  That did the trick... for now, since everything appears to be damaged (I can use the program and the work very well, but no file windows update will not work).
  SFC detects inconsistencies but he did not get to 100%, it stops at 34% saying it had problems and "could not perform the requested operation."
  I also tried different microsoft tools. as the URSCheck and he only says: "this update does not apply to your machine.

  so I guess my whole installation is really really corrupt (and makes me really hate Vista more reason, until now almost all my facilities or computers other people that contains vista, are full of mistakes or quirkcs diferent that prevents normal use.)

  so Im trying to install Windows 7 in another partition and Im thinking in whiping it that soon everything is installed there.

  -= Noob programmer =-

• error install Vista sp1 installation file Windows6 0x8007000D. 0-KB936330 - X 86

  Hello

  I use a vista home basic windows which was preinstalled on my computer laptop compaq presario to THE V6608 that I bought in January 2008. Recently, I got my laptop to its factory settings. After that I tried to install the full windows vista sp1 update patch (. Windows6 0-KB936330-X 86-wave0) which was about 434 MB in size. whenever I do, I get the error message "there are internal an error 0x8007000D" as directed by the support page from microsoft on that I installed the microsoft update scan tool that is also a updated and uninstalled my antivirus software and tried again. I still get the same error. Can someone help me with this?

  See...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [Error 0 x 80070002; 0x8007000D; 0 x 80073712; 0x800b0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Your first post was unclear: I thought you were trying to install SP1 manually (after downloading the Setup program), not via Windows Update.

  When you reinstalled Windows, the free trial of Norton would have also been reinstalled (but not valid, of course). Do you have (1) uninstall the Norton free trial once again and then (2) download/run the Norton Removal Tool before you (3) reinstalled NOD32? [Yes/No]

  Remember: you can always open a free support incident. See my previous response.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft