HP G62 webcam

Similar Questions

• my hp g62 webcam is enabled - now, how can I access it

  I downloaded Cyber Cam and was able to use the webcam in my HP (HP G62t).  However, as I removed Cyber Cam I was not able to use the webcam.  I checked on the master device and the webcam is turned on and the software and drivers are up to date.

  How can I access the webcam on this laptop.  Help!  Thank you-

  Alonzo

  Please check to see if you have Cyberlink YouCam on your laptop, I believe that it is the application with which we embarked on what you can use the webcam.

  Thank you for your response, thank you.

• HP g62-149wm webcam

  I would like to be able to turn on my webcam (with a click or two) to register myself so my son had memories of me after I pass but I don't know how to turn it on! I tried to type in QUICK PLAY after clicking on start (windows icon), but nothing shows up! So any help here would be much appreciated and I thank you in advance for your time and your help about this matter!

  Hi Ronnie!

  Please try this:
  Find and use the Webcam software that came with your computer

  If your computer is equipped with a built-in webcam, HP has preinstalled software that allows you to record and share video from webcam: Cyberlink YouCam, MediaSmart WebCam or TouchSmart Webcam. You can find these products of software on your computer as follows:
  1. Click Start to bring up the start menu.
  2. Enter one of the following words in the search field:
     • YouCam (for some desktop all-in-one PCs and many portable computers)

     • MediaSmart (for with many all-in-One desktop PC and laptop computers)

     • TouchSmart (for touchscreen PC)

  3. Click on the name of the software of the webcam from the list of search results. If the name of your software of the webcam does not appear in the list of search results, try to search again using one of the other names.
  4. What happens when you open the software?
     • If you can't find and open the webcam for your computer software, then go to the next step.

     • If you have found the software of the webcam, it opens and you see a picture, then finished. Your webcam works.

     • If you have found the software for the webcam, it opens, but you can't see the video in the main display window, restart the computer and try again. If the problem persists, use the section "Video does not appear in the webcam software '.

     ----------------------------------------------------------------------------------------------------

  I copied this from the HP support page: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02452221&cc=us&dlc=en&lc=en&product=4164688&tmp_track_link=ot_search#N70
  In case, that the steps mentioned above, didn't help, just click on the support link and follow all the steps of troubleshooting!

  I hope that helps!

  See you soon
  Julia

• The G62-361TX notebook webcam does not work.

  Hi all!

  I have a problem with the webcam after installation of operating system Windows 7 Ultimate x 64 charges. It was working fine before with the same OS, Webcam light always ON the beginning of "windows boot.

  I tried to uninstall and update the driver, nothing seems to work.

  Webcam is not detected in Cyberlink Youcam when I opened the application of YouCam webcam (white) light goes OFF, then the LED lights once more when I close the YouCam application .

  Don't know what to do next.

  Help, please!

  SSA

  The problem was faulty Webcam (material). I had solved with the new party in the Service Center HP for free since my laptop is under warranty.

• Webcam does not appear in Device Manager

  I have a model of portable pavilion G62-233NR windows 7 64-bit, with a built-in webcam.  YouC'm software was bundled with it and worked.  Now the webcam is not found by one of the video programs AE Skype, Youcam... etc...

  I also noticed that the webcam does not appear in Device Manager. I tell me that I have to reinstall a driver for it but do not know what driver to install. HP has the following availble drivers for my model but which?  If one of the pilots was labeled "webcam", the task would be easy. I hope because the driver is missing in Device Manager that has installed a driver will set missing cam... I'm worried because I don't see a driver named "webcam" in the list... but what else could the problem, how can I get the driver installed, if that's the problem.

  Hello world

  I have windows 7, in the balk suggestion you type cmd

  then you have a suggestion, then you must right-click of the mouse and select administrator. otherwise, you will not be of addministrator and you can not make the order.

  Greetz

  Steve

• Available to the pins of the webcam module

  I'm building a detector simple alpha particle and want to use this webcam that I'm waiting to receive. So I hope someone can help me understand what the pins are on the webcam module.

  As the picture below shows the number of spare parts is 626656-001 and the list of products, it is used in can be found here: http://partsurfer.hp.com/Search.aspx?SearchText=626656-001. I searched for useful patterns, but without result.

  

  Thank you!

  Having received the cam [1] and the corresponding cable (P/N DD0AX6CM002) I did a second round of research and came up with the answer in an old NET [2]. The user CompRepairGurus referenced schemas [3] and provided this image:

  

  This information has been verified by seeing how the pin 1 and 2 related to a twisted cable pair and using a multimeter to verify that the PIN 4 and 5 have a connectivity with areas of grounding of the module camera (scew holes).

  So the answer regarding the image in the first post is:

  A = pin 1 Data +.

  B = pin 2, Data-

  C = pin 3, + 3.9VDC

  D = pin 4, ground

  E = pin 5, soil

  ---

  [1] camera module Info:

  Suyin-A
  
  DB06501 SYZLR69
  
  AI000319000 R010000
  
  HF0319-J310-OV01 AXM/SXD-AXL
  
  E154554
  SH - M1 (II) 94V-0
  JMB310 + OV7675

  [2] DV5 webcam pinout, post #10 - HP Support Forum's

  [3] HP G56 - G42-G62 schemas, Compaq Presario CQ56 - patterns of CQ62, 31AX2MB00D0, DA0AX2MB6E0, DA0AX2MB6E1, AX2 - AX7 motherboard schematics

• Web Cam driver for HP G62-340US

  HI -.

  I have a HP G62-340US. series # CNF0527116. Window 7 Hm. Premium 64 bit.

  Just re-installed Windows. Went to the driver's side of HP for this laptop.

  NO DRIVER WEBCAM SHOWN HERE.

  Someone please post a link to the HP site where I can download this driver.

  Thank you

  Patrick

  Hi, Patrick:

  Normally you just install the cyberlink youcam software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123546-1&cc=us&DLC=en&LC=en&OS=4063&product=5278311&sw_lang=

  If there is a device controller smbus appearing in Device Manager you must install the AMD Chipset drivers and reboot.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• HP webcam went

  I have a HP G62 - 340US Notebook PC, my operating system is windows 7.

  A few weeks ago, I got a new hard drive in my laptop and now I can't find my webcam more.

  applications that include webcam say: not found webcam.

  main question: how to get back my webcam?

  Best regards, Samantha

  Hello

  Please find the link given below might help you solve your problem.

  Troubleshoot Webcam in Windows 7

• Unauthorized access to webcam

  So I installed an antivirus on my mac to air that has some features to prevent an applications or websites to use the webcam on my Mac when I do not know and I discovered that whenever I opened an AppStore strives to access my webcam and this attempt is blocked and reported by my antivirus

  So I would like to know why some applications on my mac system access my webcam without my permission and which data are collected in a way?

  I am not really concerned about privacy, but I think I must know, understand, and control what my system, because it really violates my rights of confidentiality and security

  Remove the antivirus software. It is worthless. You're not spying.

• Logitech C310 Webcam not recognized

  I have a Mac Mini from 2012 which I just upgraded to Sierra. Everything went well except the webcam, a Logitech C310, is not recognized by the operating system. He keeps his identification as "unknown device". It doesn't seem to work properly, but I fear that it is not properly recognized by the operating system.

  Anyone else have a similar problem with a Logitech webcam that faces a problem?

  Contact Logitech technical support. The camera may be incompatible.

• Question about webcams with Macbook Pro 13-inch, mid 2010

  Bear with me as I am the most fundamental basic Mac users. I am currently using a MacBook Pro (13-inch, mid 2010) with OS X Yosemite 10.10.5 I don't use Skype or FaceTime or something like that. Recently, I joined an online course in which they said I need a webcam, headset and microphone so that I can communicate with my instructor and discussions in class.

  I have really no idea what hardware inside is on my laptop. Is the built in camera something that could be used for this purpose? Or do I need to buy these separately three elements to make this work? And if yes, are you easy to install and can anyone recommend something good, but also low-cost as possible.

  Thanks in advance for your time.

  michellew_ wrote:

  Is the built in camera something that could be used for this purpose?

  Or do I need to buy these separately three elements to make this work?

  Your built in FaceTime, camera is sufficient. This is the idea. outdoor cameras are mostly a thing of the past. If the internal webcam is broken, an external is always an option repair vs.

  You may need their proprietary software to connect to their course however

• iMovie does not recognize Logitech HD Webcam C310

  I'm running OS X 10.11.6 on a MacBook Pro for 6 months. I would use my Logitech HD Webcam C310 (USB) to import images from a film 8 mm 60 years projector to iMovie, but iMovie does not recognize the camera. FaceTime, however, DOES not recognize the camera, and it appears also in system information. But no matter what I do (restart iMovie, disconnect and reconnect the camera, restart the machine), iMovie displays only the camera, which he calls the "FaceTime HD camera." Appreciate any help to get this camera to work. Thank you

  I have a Logitech C920 webcam, and it is not recognized by iMovie.  It is recognized by Quicktime Player and Photo Booth applications and with one of these, you can save a movie that you can then import into iMovie.

  Geoff.

• Logitech c920 no video display Webcam in Firefox

  Does not show my Logitech c920 webcam video in Firefox, but the audio works fine.

  I have tried with all disabled add-ons.

  It is the only webcam on my system.

  I found a fix for the problem. For Firefox, in his topic: config controls carried out in accordance with the preferences media.*.enabled media.autoplay.enabled search is set to false. Return to the default Boolean value (true) solves the problem. A response to this thread also proposed changes to the preferences of media.*.enabled back to their default settings, but it does not apply to my solution. Therefore, other media.*.enabled preferences are not relevant.

• I get "mime type or video format is not supported" for the sons of live webcams. What should I download to fix this problem?

  I'm not a COMPUTER expert. I get: "mime or video format type is not supported" as a message on a webcam live feed Web site: chaturbate. What should I download to fix this problem?

  Thank you

  Collin

  Flow cam I looked all used Adobe Flash Player.

  Flash appears as a plugin installed in your system details.

• How can I choose the webcam that I use when starting a video call of 'Hello '?

  If I join one Hello video call (conversation) was started by someone else, I can choose which webcam I want to use my integrated vs. external webcam. How can I do when I start the conversation? Is it possible to save these settings for my favorite webcam?

  Hello

  The people who answer questions here are for the most part, other users Firefox dedicating volunteer their time (like me), not employees of Mozilla or Firefox developers.

  If you want to leave a comment for the developers of Firefox, you can go to the Firefox help menu and select submit comments... or use this link. Your comments gets collected at http://input.mozilla.org/, where a team of people read it and collect data on the most common questions.

  Thank you Ronnie.