Windows Vista sp2 get error code 800b0100__Its a 32-bit

Similar Questions

• Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

  Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

  Now just got a new error code: 6 to 8.

  The updates, I can't update (!) are:

  1. SQL Server 2005 Express Edition Service Pack 4
  2. Update of security for MSOffice 2007 System
  3. Update for MS 2007 Office system
  4. Update for MSOffice Outlook 2007 Junk email filter

  Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

  Thanks in advance

  Sharon

  original title: error codes: 6-8 and 80070641

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Reference Dell inspiron 1521 reinstall windows vista sp1 getting error code 0 x 80070057

  I'M JUST TRYING TO INSTALL WINDOWS VISTA SP1 DISK ON DELL INSPIRON 1521 AFTER CRASH AND GET ERROR CODE 80070057 0 X, WINDOWS WILL REINSTALL OR REPAIR CAN NOT GET ONLINE, NEED HELP

  Hello

  I suggest you follow the steps in troubleshooting section below and check if it helps:

  Error message when you try to install service packs or updates of Windows on a Windows Server 2008 or Windows Vista-based computer: "ERROR_INVALID_PARAMETER(0x80070057)."

  
  

  http://support.Microsoft.com/kb/2469239

  Hope this helps,

• During the reinstallation of Windows Vista I get error code: 80004004 for KB978601.

  do reinstall Vista got the error code on article KB978601 80004004

  original title: error 80004004 KB978601 code how to fix?

  Hello

  Follow the steps and check if it works.

  What exactly are you trying to do?

  Step 1:: put the computer in a clean boot State before updates

  Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Step 2:Download and install the update manually.

  http://www.Microsoft.com/download/en/details.aspx?ID=21697

  If the above fails, try resetting Windows Update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Windows Vista SP2 install error code 80070002

  I even tried to delete the temporarory he began to download the files obtained at 30% and everything stopped. and now, you can download sp2. What should do?

  Hello

  read this

  It is about this advice from microsoft

  Windows Update Error 80070002

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service and then try to check for Windows updates again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  If that does not solve there is a special forum for PC problems

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Try to update security update for Windows Vista KB2286198, get error code 80070017?

  Impossible to update a security update

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  Try to manually download the update and install.

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB2286198&displaylang=en&sType=s_basic

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• Impossible to update of the supplements of platform for windows vista, I get error code8007371B

  I could not update all supplements platform since 13/01/11 for 32-bit vista, I get error code 8007371B in case of failure, no idea what this means? and how can I solve this problem

  Hello

  see if that helps

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8007371b/78ca99c3-FA84-404D-A52A-2bd74b2dba74

• Whenever I try to update windows Vista, I get error 8E5E0408 and 0x8000FFFF error how to fix?

  Every time I try to update windows Vista, I get error 8E5E0408 and error 0x8000FFFF. What are the mistakes and how to fix?

  0x80000FFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414>

• Windows vista update 80246008 error code

  Windows vista update 80246008 error code

  You must be logged in as an administrator to perform these steps.

  If you receive Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  To change or restart the Service (BITS) Background Intelligent Transfer

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3 right-click the Background Intelligent Transfer Service (BITS) service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic (delayed start) is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  To change or restart the Windows event log service

  1 open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. right click on the Windows event log service and then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. next to Service status, check whether the service is started. If not, click Start.

  If the problem persists after you follow the steps above, go to the Windows Update Support Center website to request support by e mail. https://support.Microsoft.com/OAS/default.aspx?Gprid=6527&St=1&wfxredirect=1&SD=GN>

  OR

  Try here and see if Russell Pope is available, if not, try another available technology.

  http://supportservices.Microsoft.com/support/services/windows_update>

  UTC/GMT is 10:53 on Sunday, December 25, 2011

• Windows Vista SP2, is error (0 x 80070490)

  I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!

  friend of Bill w.,
  Go through this article , because it gives the steps to solve the problem you are experiencing.  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

  I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

  How do I beat successfully automatically update?
  F....

  Hi Mubarak,

  Can you please tell me the number of KB article of updated with the question?

  Take a look at the response from here-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

  Thank you.

• Update for Windows Vista (KB2491683) security error code: 8009310-B

  For months, I have not been able to install the update for Windows Vista (KB2491683) security.  I get the following error code: 8009310B.  What can I do?

  Maybe this might help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-8009310b-with-security-update-for/1d0d66ff-f382-4de7-911b-aabb267f99f3

  It's the new KB but same error and cobaltgrey found the solution.

  LC

• I try to install the windows update and get error code 8E5E03FB. There are 4 total updates and they all failed. Anyone know what I need to do? __

  I try to install 4 updates to window that are considered important. I get error code 8E5E03FB. When I search what to do there is no specific answer to this error code. Anyone know what to do?

  Reset Windows Update components: http://support.microsoft.com/default.aspx/kb/971058

  Put the computer to boot: http://support.microsoft.com/default.aspx/kb/331796
  Then try to update windows.

  All the best!

• Windows Vista SP2 installation error loop (x 64) 0xc0190036 error number

  Hello, after installing SP2, I constantly make the same mistake, the bad thing is, insteath to back off, the SP2 update keep trying on and again and again to change the file that contains an error (file checks! error 0 x 00190036 mshtml.tlb!).
  now... I think that microsoft really screw them this time, because the installation program runs in any mode of windows, that is to say, cannot go to safe mode to attempt to recover from there, it's just again ONCE the attempt to install the sloppy SP2, restart the computer does nothing, as the update again will activate itself , so I always end up stuck in this part of the file with this error code mshtml.tlb (it continues to blink constantly as his try again and again access the file)

  Specs: Windows Vista SP1 Ultimate x 64
  GA - X 48 - DS4
  Q6600 @ 3 Ghz Kentsfield.
  4 x 2 GB (8 GB ddr2 800 Mhz)
  Sapphire Hd 3870
  2 x Western Digital Caviar (500 + 160 Gb) + Seagate 250 GB
  Sound Blaster Audigy 2 Zs

  Previous mistakes: I could never install IExplorer 8, it still reported a similar error, but with the ieunit file (don't remember the exact file currently extension)

  so the question is: will there be a fix for this problem? or do I just simply restore and try to recover manually in the hardway (Ie, run the Vista cd repair tool)
  im not wanting to use the repairtool, because he already ruined an once installation after a poor pass from windows update.

  * edit *.
  just to correct the incorrect error code, the correct error code reported is: 0xc0190036

  Sometimes the error is then replaced 0 x 0190002 then 0xc0190005 when stopping down.

  Note that I am on windows vista ultimate SP1 x 64 = programmer Noob =-

  Hi Tamalero,

  You got the error message indicates that mshtml.tlb is damaged and there is one possibility of other files system is corrupted as well. All what we need to do is to rename the DLLs corrupted, restart the computer and let start the computer normally to complete the installation. Follow these steps to rename the corrupted dll file.

  (1) Insert the windows vista dvd and boot from the dvd.

  (2) select repair your computer.

  3) click on command prompt

  Type the following commands and press ENTER after each line

  C:

  CD windows

  CD system32

  Mshtml.tlb.old mshtml.tlb Ren

  (4) output from command line

  (5) restart the computer and boot up normally

  If you GET the black screen with a similar error and one different (other than mshtml.tlb) file, make a note of the dll file, repeat steps 1 to 5 and type the name of the file in step 3.

  Restart the computer. It may take a while and you will be asked to connect to the desktop computer.

  Check in system properties if SP2 is installed.

  I hope this works. If you still have problem please do after back...

  Thank you.

  Hi error_counter here:
  do a "repair" is only starting problems, and once they are solved, the problem persists (mshtml.tlb error)
  I tried to remove this file, but then the error from 0xc01900036 at 0 x 000034
  so I'm stuck again, I don't know why the file mshtml.tlb is really important to "detect" If service pack updates it anyway.

  and like I said, even though vista windows SP1 supposedly has DONE a system restore point, no system restore points were detected by the dvd (one of the things that I hate about Vista than their restore points are a draw, and you can get by no unnecessary work anytime..)

  the thing which allow me to return back to SP1 followed the instructions of another post here, related to the error 0 x 000034 in this forum but for SP1.
  I went to the c:\windows\system32 directory and renaming of software files, security, SAM and default and replace them with copies of the REGBACK folder in system32\config
  It could back me to SP1, unfortunately a quirk stuck me then in an infinite "configuration updates 3 of 3" forever time it boots (it restarts itself after a few days). and had to delete pending.xml file

  That did the trick... for now, since everything appears to be damaged (I can use the program and the work very well, but no file windows update will not work).
  SFC detects inconsistencies but he did not get to 100%, it stops at 34% saying it had problems and "could not perform the requested operation."
  I also tried different microsoft tools. as the URSCheck and he only says: "this update does not apply to your machine.

  so I guess my whole installation is really really corrupt (and makes me really hate Vista more reason, until now almost all my facilities or computers other people that contains vista, are full of mistakes or quirkcs diferent that prevents normal use.)

  so Im trying to install Windows 7 in another partition and Im thinking in whiping it that soon everything is installed there.

  -= Noob programmer =-