Windows Vista Ultimate: SP1 CD can not install for me to Dual-Boot 7 and Vista

Similar Questions

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• BUSINESS INKJET 2800: HAVE IT IE 9 FOR VISTA. CAN NOT INSTALL FOR THE PRINTER DRIVE INKJ 2800 B. MESSAGE: IE 5.00 INVESTIGATION OR LATER

  I WAS TRIYING TO INSTALL DR. PRINTER HP BUSINESS INKJET 2800

  I HAVE IE 9.

  CAN NOT INSTALL THE SOFTWARE.

  A WINDOW WITH THE ERROR MESSAGE SET THIS POSTER:

  INTERNET EXPLORER 5.0 OR LATER.

  HOW CA I FIX THIS FROM LITLE?

  I HAVE THE LATEST VERSION OF MICROSOFT INTERNET EXPLORER FOR MICROSOFT VISTA

  THANKS FOR YOUR HELP

  Hello

  The original CD was made for earlier operating systems.

  Follow these steps to install the printer on Windows Vista, the drivers are already included in the operating system:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3656598&docLocale=en_US&docid=emr_na-c00868762

  Kind regards

  Shlomi

• Windows Installer stuck on manual, can not install programs

  I can't install programs on my computer. One of the solutions I found was to change Windows Installer from manual to automatic. But when I double click on the installer and click on properties, to change the manual auto box is greyed out and I can't change it. Any suggestions? Thanks for your time!

  Hi April,

  I appreciate the efforts to solve the problem. We would like to know the following information form you for help to come.

  Have you connected to your computer as an administrator user?

  You might face this question when the Windows Installer service is disabled. Make sure that you connect to your computer as a user administrator and then follow them steps below to solve the problem.

  Method 1: Make sure that the Windows Installer service is not set to disabled.

  Follow the steps below.

  (a) press the key Windows key + R to open the rundialog box.

  (b) typeservices. MSC . in the run dialogand then press enter to open Services.

  (c) search theWindows Installer service, and then click Properties.

  (d) right click on the Windows Installer serviceand then click Start. The service should start without errors.

  (e), try to install or to uninstall again.

  Method 2: Reregister the Installer engine.

  Open the to-do bar , and then search for the misexec.exe process is running. If prior to installation, you see this process, it means that there is a process that uses this service. Follow the steps below.

  (a) press theWindows key + X key, select command (Admin) prompt to bring up the elevated command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  (c) try to install or to uninstall again.

  Start your computer to clean boot and check.

  Perform a clean boot to verify if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts. Follow these steps in the link below to start the computer in a clean boot.

  How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/929135

  Warning: Please go to the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you resolve the issue.

  Write to us at the State of the question. We will help you to come.

• Windows 7 Home Edition premium can not install the language pack?

  Ugh... I can't change launguages in windows 7 Home premium

  Anyone know how to install the language pack for windows 7 Home premium, or any way to install the Chinese language?

  Windows 7 language packs are available for computers that are running the Windows 7 ultimate or Windows 7 Enterprise
  http://support.Microsoft.com/kb/972813

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Hello... Windows 7 here. I can not install one of the Adobe products except adobe flash player...

  I get the error Code: 1-clouds Creative

  and all other products tell me that I have to download a programmaAssistant something that exists even its not more...

  Help!

  uninstall all cc

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  install the application of office cc, https://creative.adobe.com/products/creative-cloud

  and use the application to install your programs of cc.

• I can't install the new program in my laptop and delete old programs, get the error message "windows service install is not installed correctly.

  I have problem with installer in windows vista, I can not install the new program in my laptop and delete old programs.

  I can't update windows vista.

  Help me fix my laptop.

  Solve the problem. I reinstal windows vista, I have install microsoft security, I don't use antivirus hid the dangerous virus. I use more cnet.com is very dangerous.

• I can not install Lightroom 6 after a problem with the pc and upgrade to Windows 10. "Errors occurred on your installation.

  Hello

  I am a user of Lightroom 4 since it came out and it worked fine.

  My system is based on a motherboard Asus Maximus III, the Intel Core i7 875K 2.93 GHz processor, card EVGA Geforce GTX 960 Graphics, Corsair Vengeance 8 GB of RAM.

  I used to have Windows 7 Home Eng 64 bit on it.

  After installing Lightroom 6 everything is fine again, but then the evil came:

  There was a problem with the pc, so I had to use the restore before installing Lightroom 6 point, bringing back me to Lightroom 4

  The problem is that somehow my internetbrowsers stopped working one by one. A virus? Norton was running, so it shouldn't.

  The restoration of an early version did not help the problem

  I needed the PC for work so I installed the free update for Windows 10

  Now, I can not install my Lightroom 6 more: it keeps giving me the following box:

  

  Of course stop the firewall did not help. Looks like a standard sentence as well.

  How to solve this?

  Thank you for reading.

  Settle in the right forum.

• Downgrade from Windows 8.1 for Windows 7 Ultimate sp1

  Hello

  as says subjest, due to the requirements of a non-standard software operating system, I need to downgrade a Lenovo M93 Windows 8.1 64 bit for Windows 7 Ultimate sp1.

  Should I buy a new product key? And nobody knows how to find?

  BR

  Andrea

  Hello

  You will need to do a clean install of Windows 7.

  But the first thing is to check if Lenovo supports and provides drivers for Windows 7 for this model.

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  Microsoft sells more than Windows 7.

  Try Amazon.com, etc.

  And make sure you buy the complete sealed package: DVD, license, etc.

  Do NOT purchase the product on their own keys as they are normally stolen or pirated or illegally sold product keys MSDN

  See you soon.

• Reinstall windows 7 ultimate SP1... serial key / Liscense problem

  Hello

  I have windows 7 Ultimate SP 1 and original liscense and serial for her key. I used a software (7TOKEN backup serial key MANAGER). But when I installed the new windows 7 Ultimate SP1 it will not work. I don't know how to activate my windows by using the same key. my laptop is same and OS version is even too

  Thanks a lot in this regard.

  Looking forward to your email

  Concerning

  GOMES

  Your installation is not genuine.

  You have a valid OEM_SLP key only for the installation of Windows 7 maker - your machine was manufactured before the release of Win7.

  The key comes from an Alienware computer - your computer is a Toshiba.

  You will need to reformat and rInstaller helps real media and key - you obviously used a recovery Alienware for this installation disc.

  Is that the key you are trying to register end with TCVBD?

  If Yes, then all of this is false.

• Satellite L300 - I can not install an update for Windows Vista

  I can not install an update to Windows Vista after you restore laptop (satellite L300) to factory settings. Tried to install with automatic updates and download of the update on your computer. What auto-update error: 8024 to 000.

  When you try to manually install SP1 getting error: 0800FFFF. I tried to disable the firewall, Defender and the UAC. Someone with such ideas?

  The Windows Update 8024 A 000 error Code means THE NOSERVICE WU E. This translates as UA was impossible for incoming calls to THE service.

  I would like for you to perform general troubleshooting steps for Windows Update.

  This diagnosis is generally applied to all Windows Update related issues.

  Stop Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net stop wuauserv
  net stop bits
  net stop cryptsvc
  4 Please, do not close the command prompt window.

  * Rename Windows Update records *.
  1. at the command prompt, type the following commands and press ENTER after each command:
  2 ren %systemroot%\System32\Catroot2 Catroot2.old
  3 ren %systemroot%\SoftwareDistribution SoftwareDistribution.old
  4 Please, do not close the command prompt window.

  Registration of DLL's on Windows Update *.
  1. Please copy and paste the following text in a new Notepad document and save the file as WindowsUpdate.BAT
  2 if it is registered correctly the icon will go from a Notepad file in .BAT file which has two blue toothed wheels as its icon.

  Restarting Windows Update services *.
  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. If you receive a user account control notification simply click on continue.
  3. at the command prompt, type the following commands and press ENTER after each command.
  net start wuauserv
  net start bits
  net start cryptsvc
  output
  4 now, please check the updates via Windows Update to determine if the problem has been resolved.

• New OEM Windows Ultimate 64 bit SP1. but can not activate.

  Salvation;

  Have installed a Dell OEM W7 Ultimate 64-bit SP1 Version.   Here in Germany ANY OEM can be installed on ANY computer - regardless of manufacturing.  (law since 2000)  Activation failure.  Although the product key is correct - have checked with Keyfinder software - I get the message-"the product key you entered cannot be used to activate Windows on this computer.  The error code is 0 x C004C008 - checking out tells me that either the operating system has been installed on computers too or was reinstall on the same change computer - hardware computer - or transferred from another PC - NONE of these are correct in this instance.  The OS is new - has not been used - never been not installed on another machine - no material change - and not been reinstalled.

  What is the solution?  I tried using command prompt - correctly - installed product key but also the same error after installation!

  Could you link me to this law that allows the transfer of the OEM licenses?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  I installed adobe pagemaker 7.0 in windows 7 ultimate, but I am not able to use it, can anyone tell me about any other program that will allow me to open my page maker in windows 7

  @

  3 samples of files pm6 and @jay chevako warning message

  On Mon, Sep 21, 2015 at 00:25, Jay Chevako [email protected]>

• Can not install MSXML on a Windows 7 64 bit. Help, please!

  • 
    
  • On a Windows 7 64 bit (new installation), I can not install MXSML. I get an error HKEY_LOCAL_MACHINE32\Software\Mxsml2.DOMDocument.4.0\CLSID
  • I am the only user on this computer and I have rights to admin (checked and double-checked). I can not install some software because it bogged down at this stage. Currently, no version of MSXML is installed on my system. Help, please! It is a self-built system using ASUS P6T Deluxe v2 motherboard. Everything else seems to work very well.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Ultimate (x 64) will not be installed in AHCI mode

  System:
  ASUS Maximus Formula 1403 BIOS configured in AHCI SATA II
  Intel E8500 to 3.24 G
  4 GB Corsair Dominator at 1142MZ
  2 * 300G WD VelociRaptor (BFVS) in AHCI
  LG H20L Blu - Ray writer
  Map its strong auzentech 7.1 PCIe
  Sapphire 5870 PCIe graphics card
  Samsung Syncmaster 275 t
  PSU PC Power & Cooling 860W
  PC power & cooling UPS 1500
  Intel (r) Matrix Storage Manager Driver Version 8.9.0.1023 WHQL, Intel inf Installation Utility v.9.1.1.1019 WHQL
  Windows 7 Ultimate (x 64)
  always clean install partition wiped with zeros and partitioned and aligned using Terabyte ready for formatting

  No matter what I do, or what Intel drivers version I am using Windows 7 Ultimate (x 64) will not load iaStor.sys (or it is native msahci also).  The only way I can get windows 7 to install is to configure the BIOS for Enhanced IDE; what I am able to install msahci after Intel AHCI drivers through a reg hack and a few reboots
  The installer written in that drivers are not compatible; to contact the vendor for a newer version - I use are compatable last, Intel for Windows 7 RTW. I have no problem whatsoever with Windows XP (x 64)
  He simply refuses to recognize AHCI mode during a new installation!
  BIOS is the latest version and updates module IMSM.
  .. .anyone have any ideas?
  Thank you

  same problem here.

  GIGABYTE MA785GPM-UD2H, who doesn't have a problem with Windows 7 Professional x 86 in AHCI mode and no need to device driver. with x 64 Ultimate, AHCI or RAID will not accept/load the driver.