Windows - writeback failed

Hello

I have I have Ball 4 GB pen drive. Every time every time I try to copy the data into it, it copies files & displays the following message:

The disk cannot be written to because that it is write protected. Please, remove the write protection from the volume I have ball in drive\Device\Harddisk1\DR15.

Once I clicked on cancel he invites me to remove the protection on the disc & in the system tray, it gives error "Windows - delayed write impossible."
I tried by formatting the USB key. Also analyzed the system. There is not any virus. My security software is it also not blocked.

What to do in this case?

Hi AmS8_7,

1. did you of recent changes on the computer?

2. you receive the error message when copying files or folders on the disk?

3 when was the last time it was working fine?

4. have you tested any USB key on the computer?

Try the steps mentioned below and see if it helps.

(a) click Start.

(b) type diskmgmt.msc in Run.

(c) in the disk management window, select the USB key, right-click on it and click on Format.

(d) now choose the file system and Allocation unit size.

(e) click OK.

If the previous step fails, then the USB on any other test computer and check if the problem persists.

Tags: Windows

Similar Questions

  • HP 8000 Elite USFF: upgrade Windows 10 fails HP 8000 Elite USFF

    Got Windows Update to upgrade and decided to move to 10 Windows on a PC here in the office.  Attempted of the implemented installation of download, but it has failed, then downloaded the multimedia authoring tool and downloaded and burned to DVD a .iso for installation.  Returned to the place in the upgrade, but once again, he failed.  The message is "installing Windows 10 failed".  It is in a small white box.

    What are the options here? I tried the BIOS updates after reading that an older BIOS could be the source of the difficulties, but I can't make heads or tails of what exactly is the update of the BIOS it if there is one.  There are 5 downloads under the heading of the BIOS.

    I'm willing to do whatever I have to do to get there, but I don't know what I should try next.  I saved before allowing updates W10 and begin the process, so it's not a problem.  I can Flash the BIOS or something else if necessary, just need advice.

    Any help much appreciated

    I assume you are running Windows 7 Pro desktop 8000 Elite. If so, the latest version of the BIOS is rev 1.14 and can be recovered from http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4065880 & swItemId = vc_156854_1 & swEnvOid = 4060

    If you download and run the Softpaq BIOS, simply follow the instructions to install and reboot

  • Windows update fails-G62-225DX - bad startup a factory?

    My nephew came to me recently with a G62-225DX HP, concerned about safety.  Given this machine is several years old (recently handed down from his father - I quickly understood why), I was surprised to see she was always being basic Windows 7 Home Premium.  Without SP1.

    My first attempt to resolve this was to run Windows Update - no luck - immediately fails with "cannot run - services is not started.  Of course, verification services, yes I see WU and BITS running.

    So, like any good tech person, I check in the case where the logs and see various errors, including the constant complaints on the Crypto database being corrupted.

    Then, up to be Googling for these symptoms/messages.  I see many people with the same problem and a lot of suggestions on how to fix this (re - reg WU, STRANDS of clear/reset, flush/empty C:\Windows\SoftwareDistribution, catroot2 flush/empty, etc.).  Even seen one on the Intel hard drive problems due to replace it with a drive of more than 500 GB (this unit still has the original 320).

    Spent hours trying all the suggestions there, especially when people said 'Yes, that fixed', nothing helps.

    Since it was not something of value on this machine, I decide backup and restore "factory".

    Imagine my surprise when, after reset of the image 'factory', it has exactly the same problem - Windows Update fails, out-of-the-box on the right!

    I think to myself, it's crazy.  The machine is faulty from the start and everyone was naïve to not get Windows updates, AT ALL!

    I even decided to try the Windows Update Checker (supposed to perform before installing SP1) and it fails with ' Windows Update Standalone install encountered and error - 0xc80000247 ".

    So, I decided to run through the suggested fixes (from M$, no less) and all of a sudden, that Windows Update works.

    I thought, it's fantastic.  He immediately calls to > 130 fixed critical.

    After a few hours of download and installed, I restart only to get a BSOD - STOP 6 b - AAARRRGGGHHHH!  Tried to go through Windows restore previous checkpoint but that too fails with a mysterious error.  In addition, many Google hits on the 6 b says that it's a hardware problem.  But he was executed until the Windows update, with nothing in the case where newspapers to indicate hardware problems.

    Then, I decided to do a restore from the image of what I started with.  At least it ran, even though she could not be updated.

    I no longer dig and see a bunch of updates to the firmware/software for this machine, including the BIOS.  Even saw some strange 'Windows updates' HP.  I thought maybe it was something like the fiasco when the power management update for Intel processors had on machines AMD, thus paralyzing them!  Still nothing - WU still does not work!

    Tried again to return to the original image, hoping that maybe to install all updates of office/hardware/driver on a virgin machine solve the problem.  Nope-WU still does not work.  Even went back through all the suggested fixed (saved as .bat files everthing).  Nothing, nada...

    So, I'm posting here in hopes that someone has a miracle cure that I missed.

    Hello:

    I don't have a magic bullet...

    The same thing happened to me while working on a friends HP 8100 Elite CMT, Windows 7 Pro, HP original image.

    Would not install SP1 or Windows updates. I tried every trick in the book and after spending more than two hours, going nowhere, including restore from the recovery discs, I decided to install a plain OS W7 clean add drivers myself using the product key for W7 on the PC.

    It has worked well.

    You can do the same thing if you can read the product key of W7 on the bottom of the laptop, and your nephew can't live without programs that was shipped with the PC.

    In addition, if you format the drive and just install W7 on current partition, you can probably find the program of the installation files for the programs supplied with the PC in the SWSetup folder.

    Here's how to do when you don't have installation of W7 media.

    Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

    Use the product key of windows 7 of 25 characters to activate your installation.

    http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

    Then go to the support of the PC and driver page to install the drivers you need.

    Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  • Want 15t_j100 Quad E2E34AV Ed: 10 Windows upgrade failed - blinking display of Envy 15 t-j100 Quad Edition Notebook PC

    Upgrade Windows 10 failed on my Envy 15 t-j100 Quad Edition laptop.

    Symptom after upgrade has been a video exhibition quickly flashing without control of the PC.

    I have to go back to the previous version - Windows 8.1.

    Back with success on Windows 8.1

    Symptoms point to video card problem after updated Windows at level 10.

    My laptop has two, provided by HP online:

    Intel HD 4600 Grapics (internal)

    NVIDIA GeForce GT 740M

    See the research, that Intel and NVIDIA have Windows 10 drivers for these graphics cards.

    Yet immediately when Windows 10 signing after upgrade, the laptop display has been viewed quickly.

    The only way I could get control of the laptop was CTL-ALT-DELETE to start the Task Manager.

    The Task Manager showed that more CPU resources would "host setting synchronization process.

    Called Microsoft Support - they indicate a likely problem with display adapter driver and advised to "go back" and then contact HP support.   called HP Support and they advised to work with Microsoft.  Great!

    Would appreciate recommendations on the way forward for Windows 10.

    Dgood43 wrote:

    Initially I found the 10.18.13.5324 Rev.A-NVIDIA graphics driver.

    I was allowing the HP site automatically detect my curent - Windows OS 8.1.

    When I manually switched OS Windows 10, I see it listed.

    I also see 10.18.15.4248 that place listed for the Intel HD 4600 graphics card.

    Can I install both of these drivers before you upgrade Windows 10?

    Both are supported on Windows 8.1?

    If so, why HP Support Assistant would not have install me the upgrade?

    Am I missing something here?

    Install only the softpaq grahips from Nvidia. It will allow to install the two drivers.

    When I click on the button 'Download' blue, it offers two choices:

    Use HP download and install the Wizard (recommended)

    Download only

    This is the second option that you recommend when you say to use "usb flash drive support? Yes. Create an installer of Flash 10 Windows usb player. This is the second choice option.

    Thanks again for your help!

  • "Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed?

    " Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution for the error Code: 80070002 0 x ' OR '0 x 80070003 '.

    To resolve this problem, remove the download directory and then to return to the update sites. To do this, follow these steps:

    1. Stop the automatic updates service. To do this, follow these steps:

      1. Click Start and run, type services.msc, and then click OK.
      2. Right-click the automatic updates service and then click on stop.
      3. Minimize the Services snap-in.
    2. Rename C:\Windows\SoftwareDistribution directory. To do this, follow these steps:
      1. Click Start, run, type cmd, and then click OK.
      2. Type cd %windir%, and then press ENTER.
      3. Type ren C:\Windows\SoftwareDistribution SDTemp, and then press ENTER
      4. Type exit and press ENTER.

      Note When you delete the folder % windir%\softwaredistribution, the history list is erased from the "Review your Updates" section of the Windows Update Web site. This action will not affect the updates installed on your computer. Subsequent updates will appear in the history list.

    3. Start the automatic updates service. To do this, follow these steps:
      1. Expand the Services snap-in.
      2. Right-click the automatic updates service and then click Start.
      3. Close the Services snap-in window.
    4. Visit the Windows Update Web site, Microsoft Update Web site, or the WSUS server again, and then download an update.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Windows update failed error codes 643 and 800736B 3

    My computer trying to install updates, but fails - I checked update history and it installed OK until the 16.10.2010, the installed just a few of the UpdateA and is now not install at all. I get 643 and error codes 800736B 3. I ran the resolution of problems and he can't find any problems. I am running Windows 7, the computer was new at the beginning of last October. can you help me, please?

    Windows update fails to install with error code 800736B 3 updates

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/98573891-EEAD-4257-8bf2-1fbac3f2a96a >

  • Windows Update fails to check for updates on Windows 7 Ultimate 64 bit.

    Windows update fails with error code "c80003fa" or full "0xc80003fa". The search for answers from Microsoft and google provided a few resources, but nothing about the 64 bit version of Windows 7.

    The 'Automatic update' service is also absent from the services.msc

    This I think if applies also to Windows Live Messenger not me open a session because of an error "8e5e03fa."

    I can provide WindowsUpdate.log on request.

    Thank you

    ... I have not an antiviral program installed. Nor I have ever not to mention that the default windows Defender. Who now can not upload...

    Windows Defender is NOT an antivirus application.

    You see the effects of the hijackware infection give.

    Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

    5 steps to help protect your new computer before going online
         http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista - Windows update fails, the error code 646

    My windows update failed code 646

    My windows update failed code 646

    Hey wagmalik

    Microsoft gave advice about your error code 646 in the microsoft below link

    http://support.Microsoft.com/kb/2258121

    Walter, the time zone traveller

  • Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

    I have THREE questions which PEUVENT all be linked togther... What do you think?

    [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
    I've upgraded from Vista about 3 weeks ago.

    #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
    To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

    #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

    A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

    .. .and it fails every time, it tries to install saying this:

    Windows Update - failed

    Code 643 Windows Update encountered an unknown error.

    "Get help with this error" provides little or no help... but it says this:
     "WindowsUpdate_00000643" "WindowsUpdate_dt000"

    All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

    #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
    He cycles most of the way through, then he Has STOPPED and says this:

    The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

    • Windows needs to be restarted if necessary to system files can be changed before you continue.

      Does not help restart. He tried 3 times and he ends up doing the same thing.
      Is it possible I deleted something out of the register so far here and which is cause of all this?
      If so, is it possible to fix WITHOUT doing a new install of Windows 7?
      OR... anything can be a problem... Please HELP!

      (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

      Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4

    Erwan,
    You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

    Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
    The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

    Hi Ben Dean,

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

    To run the System File Checker, follow these steps:

    1. Click Start and type cmd in the box start the search.

    2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

    3. at the command prompt, type Sfc/scannow, and then press ENTER.

    For more information, see the following Microsoft article:

    This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    I hope this helps!

    Thank you, and in what concerns:
    Shalini Surana - Microsoft technical support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

    Code 8007045 that appear when Windows Update fails to install important updates

    Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

    HOW to hide an update or restore a hidden update
    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update fails, try to install paths

    Windows update fails when trying to install kb976884,
    KB974234 and kb974810 in Outlook 2007. The error code is 80070641. ¿Could someone help me please?
    Thanks in advance and best regards,

    Try searching for these updates in this link: http://www.microsoft.com/downloads/en/results.aspx?freetext=kb976884&displaylang=en&stype=s_basic

    Download these update by searching in the link above
    Save it to the desktop and try to install them that should help you ;)

  • Windows update fails with error code 57 (KB951847)

    Windows update fails when it encounters an unknown error while trying to install the following:

    Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

    Installation date: 13/11/09
    Installation status: windows has encountered an unknown error: code 57
    Update type: important

    Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

    I would like to have instructions step by step on how to obtain this update to install correctly.

    Thank you

    Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

    ===============

    Step #1 => foremost, note what version of .NET Framework is installed:

    How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
    http://support.Microsoft.com/kb/318785

    Step #2-online now see resolution method 2 in...

    When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
    http://support.Microsoft.com/kb/923100

    After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

    NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

    IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

    1. the .net framework 3.5, then...
    2 .net framework 1.1, then...
    3 .net framework 1.1 SP1

    NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

    Step #3 => Check-in at Windows Update and install the critical updates of security offered.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Update failed for Windows Vista failed KB975517

    I get the same message update failed

    Hello

    In Control Panel - Windows Updates - right click top and HIDE.

    Then download and install it here:

    Update security for Windows Vista (KB975517)
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=29842c0c-8930-4B5F-83c6-1a718974b63f&displaylang=en

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ----------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows Update fails with the error 'WindowsUpdate_0000057E '.

    I have windows vista, but my microsoft office is 2002.

    For the latest updates of the week 2 windows keep failing.
    1 security Update for Microsoft Excel 2002 (KB959988)
    2. Update for Office XP (KB933388)

    Whenever the update fails, I get the error "WindowsUpdate_0000057E".

    I'm not good with computers and need help on how to fix this...

    When you try to download an ActiveX control, install an update to Windows or to a Windows component, install a service pack for Windows or to a Windows component, or install a Microsoft or third-party software, you may experience one or more of the following symptoms:

    • You may receive the following error message when you try to install a program or update:

      Digital signature not found
      The Microsoft digital signature affirms that software has been tested with Windows and that the software has not been changed since then, it has been tested.
      The software you are about to install does not contain a Microsoft digital signature. There is therefore no guarantee that this software works correctly with Windows.
      Package name
      If you want to search for Microsoft digitally software signed, refer to the Windows Update Web site at http://windowsupdate.microsoft.com to see if one is available.
      Do you want to continue the installation?

      If you click Details, you receive the following message is displayed:

      Microsoft Windows
      The signature on the software package you want to install is not valid. The package is not signed correctly.

      After you click OK in the first error message dialog box, you may receive a message that States that the installation was successful, or you may receive the following error message:

      Name of the Update Package
      The cryptographic operation failed due to a local security option setting.
    • When you try to install an update or to install a service pack, you may receive an error message that is similar to one of the following:
      • Name of the Update Package

    The Setup program could not verify the integrity of the file Update.inf. Make sure the cryptographic service is running on this computer.
  • Failed to install catalog files.
  • The software you are installing has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important).

    This software will not be installed. Contact your system administrator.

  • The software you are installing has not passed Windows Logo testing to verify its compatibility with this version of Windows. (Tell me why this testing is important).
  • When you try to install a service pack Windows XP, you may receive an error message similar to the following:
    Service Pack 1 Setup could not verify the integrity of the file. Make sure the cryptographic service is running on this computer
  • When you try to install Microsoft Data Access Components (MDAC) 2.8, you may receive an error message similar to the following:
    «"" "INF. cause installation failure: the timestamp signature and/or certificate could not be verified or is incorrect.»»»"
  • The %WINDIR%\System32\CatRoot2\Edb.log may reach 20 megabytes (MB) even though the file is typically less than 1 MB.
  • When you try to install a package from the Windows Update Web site or the Microsoft Update Web site, you may receive a message that is similar to the following:
    The software has not passed Windows logo testing and will not be installed.
  • When you examine the file % systemroot%\Windowsupdate.log, you should see an entry for one of the following errors:
    • 0 x 80096001
    • 0 x 80096005
    • 0 x 80096010
    • 0x800B0001
    • 0x800B0003
    • 0x800B0004
    • 0x800B0109
    • 0x8007F0DA
    • 0x8007f01e
  • When you use Microsoft windows update on a Windows XP-based computer, the update process may fail and you may receive an error message "0x8007f007". This can happen regardless of what type of update you select.

    • The Svcpack.log file may contain entries that are similar to the following:

    937.406: GetCatVersion: failed to retrieve version information from C:\WINDOWS\system32 \CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Tmp.0.scw.cat with error 0 x 57 937.437: GetCatVersion: failed to retrieve the version information of C:\WINDOWS\Tmp.0.scw.cat with error 0 x 80092004 940.344: InstallSingleCatalogFile: failure failed for Tmp.0.scw.cat; error = 0xfffffbfe. 940.344: DoInstallation failed failed: STR_CATALOG_INSTALL_FAILED 955.125: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2 955.125: DoInstallation: has no cancellation of registration of spuninst.exe for recovery. 962.656: cancel registration of uninstall-> Windows Server 2003 Service Pack, 0 962.656: impossible to install catalog files. 1448.406: message displayed to the user: cannot install catalog files. 1448.406: user Input: OK 1448.406: Update.exe extended error code = 0xf01e 1448.406: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.

    CAUSE

    This problem may occur if one or more of the following conditions are met: Log...
    This problem may occur if one or more of the following conditions are met:

    • Log file or database corruption exists in the folder % Systemroot%\System32\Catroot2.
    • Cryptographic services is set to disabled.
    • Other Windows files are corrupted or missing.
    • The timestamp signature or the certificate cannot be verified, or is incorrect.
    • The hidden attribute is set to the folder %windir%, or one of its subfolders.
    • No unsigned installation behavior group policy setting (Windows 2000 only) is set to do not allow installation or warn, but allow installationor the policy of binary value is not set to 0 in the following registry key:
      The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
    • The group policy enable trusted publisher lockdown setting is turned on, and you do not have the appropriate certificate in your trusted publishers certificate store. This group policy setting is under User Configuration, under Windows settings, Internet Explorer Maintenance, under Security, under Authenticode settings in the Group Policy MMC snap-in.
    • You install Internet Explorer 6 SP1 and the update of security 823559 (MS03-023) is installed. For more information about this issue, click on the number below to view the article in the Microsoft Knowledge Base:
      828031 (http://support.microsoft.com/kb/828031/) error "the software you are installing has not passed Windows Logo testing...". "message when you try to install Internet Explorer 6 Service Pack 1
    • The software distribution folder is corrupted.

    RESOLUTION

    To resolve this problem, use the following methods. Once you perform the operations...
    To resolve this problem, use the following methods. After completing the steps in each method, check to see if the issue is resolved before you go to the next method. If the problem is resolved by any method, you do not have to use other methods.

    Method 1: Rename the Edb.log file rename the Edb.log file, and then try again to install the program. To rename the Edb.log file, follow these steps:

    1. Click Start, click run, type cmd in the Open box, and then OK.

      Note On a Windows Vista-based computer, click Start, type cmd in the box to search for text and right click on cmd.exe, and then click run as administrator.

    2. At the command prompt, type the following command and press ENTER:
      Ren %systemroot%\system32\catroot2\Edb.log *.tst

    Method 2: Set the Services of cryptography on AutoSet to automatic Cryptographic Services and then try again to install the program. To set the cryptographic on AutoServices, follow these steps:

    1. Start the Administrative Tools utility in control Panel.
    2. Double-click Services.
    3. Click Cryptographic Services, and then click Properties.
    4. Click Automatic for Startup type, and then click Start.

    Note Windows 2000 does not list Cryptographic Services in the SERVICES Administration utility.

    Method 3: Rename the folder Catroot2 rename the Catroot2 (Windows XP and Windows Server 2003 only) folder and then try to install the program again.

    Note Skip this method if the operating system is Windows 2000.

    To rename the Catroot2 folder, follow these steps:

    1. Click Start, click run, type cmd, and then click OK.
    2. At the command prompt, type the following commands and press ENTER after each line:
      net stop cryptsvc
      Ren %systemroot%\System32\Catroot2 oldcatroot2
      net start cryptsvc
      output
    3. Remove all tmp*.cat to the following folder:
      % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

      If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

    Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

    Method 4: Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

    1. Click Start, click run, type cmd in the Open box, and then OK.

      Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

    2. At the command prompt, type the following commands and press ENTER after each command:
      regsvr32 /u softpub.dll
      regsvr32 /u wintrust.dll
      regsvr32 /u initpki.dll
      regsvr32 /u dssenh.dll
      regsvr32 /u rsaenh.dll
      regsvr32 /u gpkcsp.dll
      regsvr32 /u sccbase.dll
      regsvr32 /u slbcsp.dll
      regsvr32 /u mssip32.dll
      regsvr32 /u cryptdlg.dll
      output

      Note If you are prompted, click OK .

      Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

    3. Restart your computer.
    4. Click Start, click run, type cmd in the Open box, and then click OK.
    5. At the command prompt, type the following commands and press ENTER after each command:
      regsvr32 softpub.dll
      regsvr32 wintrust.dll
      regsvr32 initpki.dll
      regsvr32 dssenh.dll
      regsvr32 rsaenh.dll
      regsvr32 gpkcsp.dll
      regsvr32 sccbase.dll
      regsvr32 slbcsp.dll
      regsvr32 mssip32.dll
      regsvr32 cryptdlg.dll
      output

      Note If you are prompted, click OK .

      Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

    6. Restart the computer.

    Method 5: Remove the hidden %windir%\System32 and its subfolders attribute

    1. Click Start, click run, type cmd in the Open box, and then OK.

      Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe, and then click run as administrator.

    2. At the command prompt, type the following commands, pressing ENTER after each line:
      attrib s h % windir %
      attrib s h %windir%\system32
      attrib s h %windir%\system32\catroot2

    output

    Method 6: Set a strategy without driver signature silently succeed if you are running a version of Windows 2000, set the silent success no unsigned installation behavior group policy setting. This group policy setting located under Computer Configuration, under Windows settings, under security settings, under local policies, under Security Options in the Group Policy MMC snap-in. If you are running Windows XP or a later version of Windows, this group policy setting is no longer supported. In this case, follow these steps to resolve this problem:

    1. Click Start, click run, type regedit, and then click OK.

      Note On a Windows Vista-based computer, click Start, type regedit in the Search box and click on regedit.exe, and then click run as administrator.

    2. Locate and then click the following key in the registry:
      The HKEY_LOCAL_MACHINE\Software\Microsoft\Non-Driver signing
    3. Right-click on the Policy binary value, and then click change.
    4. The value data will appear in the following format:
      0000 02

      Press DELETE to remove the current value (02 in this example), and then type 0 (the current value will now appear as 00).

    5. Click OK, and then quit the registry editor.

    Method 7: Temporarily turn off Trusted Publishers Lockdown and install the certificates to your trusted publishers certificate store you can continue to use the group policy enable trusted publisher lockdown setting, but you must first add the certificates in your trusted publishers certificate store. To do this, disable the group policy enable trusted publisher lockdown setting, install the certificates in your certificate and then trusted publishers store on the setting of group policy enable trusted publisher lockdown again. To install the certificate suitable for Microsoft Windows and Microsoft Internet Explorer updates, follow these steps:

    1. Download the product of Microsoft update you want to install from the Microsoft Download Center, the Windows Update Catalog or the Microsoft Update Catalog. For more information about how to download updates from Microsoft Download Center, click the number below to view the article in the Microsoft Knowledge Base:

      119591 (http://support.microsoft.com/kb/119591/) how to obtain technical support files from Online Services Microsoft

      For more information about how to download updates from the Windows Update Catalog, click on the number below to view the article in the Microsoft Knowledge Base:

    323166 (http://support.microsoft.com/kb/323166/) how to download updates that include drivers and hotfixes from the Windows Update Catalog
  • Extract the package to update product in a temporary folder. The command line that you use to do this depends on the update that you are trying to install. View the Microsoft Knowledge Base article associated with the update to determine the command line switches appropriate that you will use to extract the package. For example, to extract the 824146 security for Windows XP update to the C:\824146 folder, run Windowsxp-kb824146 - x 86 - enu - x: c: \824146. To extract the 828750 security for Windows XP update to the C:\828750 folder, run q828750.exe/c t:c:\828750.
  • Right click on the file KBNumber.cat to the package to update product to the temporary folder you created in step 2, and then click Properties.

    Note The KBNumber.cat file may be in a subfolder. For example, the file may be in the C:\824146\sp1\update folder or in the C:\824146\sp2\update folder.

  • On the Digital Signatures tab, click the digital signature and then click Details.
  • Click view certificate, and then click install Certificate.
  • Click Next to start the Certificate Import Wizard.
  • Click place all certificates in the following store, and then click Browse.
  • Click approved publishers, and then click OK.
  • Click Next, click Finish, and then click OK.

    • Method 8: Check the status of all certificates in the certification path and import missing certificates or damaged from another computer to verify certificates in the path of certificate for a Windows or Internet Explorer product update, follow these steps: step 1: Verify Microsoft certificates

    1. In Internet Explorer, click on Toolsand then click Internet Options.
    2. On the content tab, click certificates.
    3. Certificate authorities roots of trust tab, double-click Microsoft Root Authority. If this certificate is missing, go to step 2.
    4. On the general tab, make sure that the dates valid from are 10/01/1997 to 12/31/2020.
    5. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.
    6. Click OKand then double-click the NO LIABILITY ACCEPTED certificate.
    7. On the general tab, make sure that the dates valid from are 11/05/1997 to 01/07/2004.
    8. On the Certificate path tab, check whether the certificate has expired or is not yet valid or this certificate is OK appears under certificate status.

      Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

      293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
    9. Click OKand then double-click the GTE CyberTrust Root certificate. You can have more than one of these certificates with the same name. Check the certificate that has an expiration date of 02/23/2006.
    10. On the general tab, make sure that the dates valid from are "23/02/1996-02/23/2006."
    11. Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

      Note Although this certificate is expired, the certificate will continue to work. The operating system may not work properly if the certificate is missing or revoked. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

    293781 (http://support.microsoft.com/kb/293781/) Trusted certificate root that are required by Windows 2000, Windows XP and Windows Server 2003
  • Click OK, and then double-click Thawte Timestamping CA.
  • On the general tab, make sure that the dates valid from are "31/12/1996 to 12/31/2020."
  • Under the Certificate path tab, verify that this certificate is OK appears under certificate status.

    • Step 2: Import the missing certificates or damaged if one or more of these certificates are missing or corrupted, export the missing certificates or damaged on another computer, and then install the certificates on your computer. To export certificates to another computer, follow these steps:

    1. In Internet Explorer, click on Toolsand then click Internet Options.
    2. On the content tab, click certificates.
    3. Certificate authorities roots of trust tab, click the certificate you want to export.
    4. Click export, and then follow the instructions to export the certificate as a DER encoded Binary x.509 (.) REB) file.
    5. Once the certificate file has been exported, copy it to the computer where you want to import.
    6. On the computer where you want to import the certificate, double-click the certificate.
    7. Click install Certificate, and then click Next.
    8. Click Finish, and then click OK.

    Method 9: Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

    To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

    1. Remove all tmp*.cat of the following folders:

      systemroot\system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

      systemroot\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

    2. Delete all the kb*.cat files in the following folders:
      % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
      % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
    3. Remove all the oem *. * files in the % systemroot %\inf folder.
    4. At the command prompt, type the following commands. Press ENTER after each command.
      net stop cryptsvc
      Ren %systemroot%\System32\Catroot2 oldcatroot2
      net start cryptsvc
      output
    5. Restart the installation of the patch failed or the installation of the service pack.

    Method 10: Empty the software distribution folder

    1. Click Start, click run, type services.msc and click OK.

    Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.mscand then click run as administrator.

  • In the Services (Local) pane, click automatic updates, and then click stop.
  • Reduce the Services (local) window.
  • Select all the contents of the Windows distribution folder, and then delete them.

    Note By default, the Windows distribution folder is located in the folder drive: \Windows\SoftwareDistribution. In this place, the drive is a placeholder for the drive where Windows is installed.

  • Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  • In the Services (Local) pane, click automatic updates, and then click Start.
  • Restart the computer, and then run Windows Update again.

    • Method 11: Perform an upgrade on site for more information about how to perform an upgrade on the spot, click on the number below to view the article in the Microsoft Knowledge Base:

    315341 (http://support.microsoft.com/kb/315341/) how to perform an upgrade on the spot (reinstallation) of Windows XP

    MORE INFORMATION

    For more information about a resolution that is intended for Windows 2000 only.
    For more information about a resolution that is intended for Windows 2000 only, click on the number below to view the article in the Microsoft Knowledge Base:

    281458 (http://support.microsoft.com/kb/281458/) error message when you install a service pack Windows 2000 or product update

    This problem has been reported to occur with the following updates:

    328310 (http://support.microsoft.com/kb/328310/) MS02-071: a failure in management of Windows WM_TIMER messages may allow elevation of privileges
    810565 (http://support.microsoft.com/kb/810565/) of the hyperlinks open in Internet Explorer instead of in default browser or Help and Support Center
    327979 (http://support.microsoft.com/kb/327979/) game stops responding (hangs) or when the introductory video is played
    322011 (http://support.microsoft.com/kb/322011/) you cannot preview a fax in the Fax Console
    811630 (http://support.microsoft.com/kb/811630/) HTML Help update to limit functionality when it is invoked with the window.showHelp method)
    810577 (http://support.microsoft.com/kb/810577/) MS03-005: a buffer uncontrolled in the Windows Redirector may allow elevation of privileges
    329441 (http://support.microsoft.com/kb/329441/) you cannot create a network connection after you restore Windows XP
    329170 (http://support.microsoft.com/kb/329170/) MS02-070: a flaw in SMB signing may permit group policy to change
    810833 (http://support.microsoft.com/kb/810833/) MS03-001: buffer uncontrolled in the Locator service may allow code to run

    For more information about configuring automatic updates in Windows XP, click on the number below to view the article in the Microsoft Knowledge Base:

    306525 (http://support.microsoft.com/kb/306525/) how to configure and use automatic updates in Windows XP

    Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

Maybe you are looking for