Windows XP Installation AV is not possible

Similar Questions

• Windows 8.1 upgrade is not possible because win 8 is not enabled

  A few months ago, I bought a new laptop of Toshiba Satallite with 8 Windows preinstalled
  Now I want to upgrade Windows 8 to 8.1 Windows. But I don't see the upgrade of Windows 8.1 in Windows store. I think it's because my current installed windows seems not you be activated...

  When I try to activate, I get error: 0xC004F074.
  I found a solution using the command: SLUI 3 and then enter the product key to activate it, but I don't have a product key! There is no sticker with a product key on the laptop.

  Could someone help me with this question, so I can activate my current installation of Windows 8 and upgrade to Windows 8.1?

  Post edited by: mbarten

  Hello

  I had some problems with an upgrade to 8.1 to win in the past...
  Finally, I managed to install the Windows 8.1 update once the laptop has been set back to factory settings.

  I'm not sure if this should be done in your case, but where the 8.1 Win update is not possible after installing all the windows updates, you should reset the PC back to factory settings. After that the upgrade should work.

• Receive error message: Windows 7 installation disc is not compatible with your version of Windows.

  I bought windows 7 from the College Bookstore, and I can't install it - why this

  He says that the installation disc is not compatiable with your version of windows. to upgrade, you need the correct installation disc

  Hello

  You don't say what you are upgrading.

  Please read this information.

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Once you have read the foregoing regarding the upgrade paths, please also read this.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• Windows 95 Installation disk does not work

  I have a Windows 95 installation disc, and I would like to install Windows 95 on a virtual machine. But when I boot the disk in the virtual machine, it does nothing.

  Am I missing a critical step?

  I use Windows Virtual PC on a Windows 7 computer.

  Thank you!

  Robert

  Robert

  Love the quote

  See this thread https://social.technet.microsoft.com/Forums/en-US/cf6e81ff-6bfa-43ec-b4f6-17c21dbcd280/help-with-installing-windows-95-on-windows-7-64-bit-home-virtual-pc?forum=w7itprovirt

  Even if you manage to install Win 95 under WVPC be aware that there is no component integration for her.  Important features will be unavailable.  Consider using VMWare Player.  The VMWare Player and VMWare tools supported by Windows 95.

  http://downloads.VMware.com/d/info/desktop_end_user_computing/vmware_player/4_0

• Finish the installation of Windows after the restoration is not possible

  Hi, I have a problem with my laptop.

  All of a sudden the keyboard reacted as the SHIFT key is down. When I insert a cd I don't have the name of the file under the icon and firefox lost my favorite pages. I ran antivirus scans, but nothing came. so I decided to do a system recovery. Now on the first page, I have to do next to complete the installation of windows, I click on the next button and it is clicked. I'm on the first page and my laptop is out of use. can you help me please?

  thanx

  Theo

  Hello

  Well, Stefan has suggested that the recovery CD is corrupt, but for me it s does not erase if you used a recovery CD or the Microsoft Windows CD.
  What did you use?

  I think that the recovery CD should be corrupted and it works without any problem.
  You format the HARD drive correctly? Otherwise, do it first and delete all partitions and try reinstalling the operating system.

• Silverlight will not uninstall because said windows package installer patch can not be opened. Someone knows what to do? Thank you.

  Hi, I deleted wrongly silverlight all programs trying to uninstall it to get a better version of netflix.  Now when I try to uninstall it the right way, I get a message from the windows installer saying "this patch package could not be opened.  "Check that the patch exists and that you can access it, or contact the application vendor to verify that this is a valid windows setup hotfix package.

  Hi, thanks for the kind reply and the aid application.  I end by using your suggestion, because microsoft windows online support was very helpful by offering a link to a fix - it program, which may be similar to what you suggested.

  Here is the info link. If you need help with installation / uninstallation. He worked a lot, restore the corrupted patch and uninstalling silverlight quick and easy.  I pushed a button and he did everything.  It's a download.
  http://support.Microsoft.com/mats/program install and uninstall.  This is part of Microsoft 'Fix - It '.
  Thanks again for your involvement.  Tom.

• Does anyone have suggestions on what to do when the Windows 7 Installation DVD is not recognized by the DVD player.

  I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit.  I ran the Windows 7 Upgrade Advisor, which was positive.

  The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.
  I tried to restart the computer and also the start of the player directly in the BIOS.
  In the BIOS I have the following message:
  "No available boot device.
  Press the ENTER key to try again
  SATA-0: installed
  SATA-1: installed
  SATA-4: no
  SATA-5: no

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.

• Satellite A300-14 - after Windows 7 installation no modem not recognized

  Hey guys, how are you?

  Unfortunately, I discovered today that the Modem is installed with the drivers on Windows Vista 32-bit, but does not work. However, I formatted my PC and installed Windows 7 Ultimate 64 bit and: no modems at all! I don't know why Device Manager is unable to see and my capture device.

  I need help guys.

  Thank you.

  My laptop is: Toshiba Satellite A300-14

  Hi dr.anm,

  Have you tried to reinstall the modem driver? I checked the Web from Toshiba site and I can find a driver of modem for Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Windows vista installation disc does not start.

  So I decided to wipe my hard drive and do a clean install of windows vista. It was working fine until after you have installed sp1. I restarted the computer, and there's just a black screen. I tried to launch the installation disc. He manages to pass the Microsoft corporation loading screen, the cursor appears and I can move it, but the screen remains black.

  When I reinstalled windows it says that the hard drive can fail quickly, so that he might be. If this is the case then I'll just disassemble the laptop and get a few parts.

  Hello

  If you got this message hard disk, perform a test of it.

  If it failed, you can always replace the hard drive and reinstall Vista, instead of demolition it.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  ________________________________

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• PS installation elements is not possible unless I have "ShellExtLoader application close."

  Hello

  I downloaded PS elements v10 for Mac OS.

  I have a dual core duo macbook, (last updated) snow leopard

  When you start the installation process, I am prompted to 'close the application ShellExtLoader.

  According to activity monitor I don't have such an application running.

  I couldn't find any ion web solution.

  I am happy I have DLed it as a free trial... but I'll have to definitely not solve this problem before buy you.

  Could someone help?

  Thank you

  Is SugarSync.  I had this problem; leave one thing and then tried to continue. Did not work until I left SugarSync.  I checked with another forum and search.  I'm installing as I type this.

  Good luck.

• Windows 7 installation disc will not work.

  I had a computer crash, so I'm returning to a computer running XP. I would like to put Windows 7 on it, but when I tried to run the install disc, nothing happens. I tried another drive with the same result and tried an independent disk, which went very well. Help, please.

  Thank you, John

  Do you have the BIOS so that the DVD drive is the first boot device?

  Also, you must insert the Windows 7 media in the DVD drive and the reboot/restart the computer.

  J W Stuart: http://www.pagestart.com

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• dreamweaver CS3 installation is not possible

  I own dreamweaver CS3 since 2005, 4 years under Win7. After a PC crash, I try to install again, but not possible (the installation file is damaged). FixIt MS can not solve the problem. Still CS3 is old, I use it often. If there are problems on html, I can resolve it manually. How can I install my old CS3 good again?

  After that I completely deleted all the registry entries manually, the installation of CS3 could be made. His works now.

  Before I used the Adobe cleaning tool, but it is not enough, several registry entries remained, the installation CD was not possible.

  Thanks again!

• The Windows 7 Installation failed, error code: 0 x 80070017

  I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:

  Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017

  What is the problem, how can I fix it? Is my Windows 7 disc damaged?

  If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disconnect all external devices except the keyboard and mouse before installing.

  If using a video card and the computer has integrated video use and remove the video card.

  Unplug the computer from the internet, if you have wireless disable.

  RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.

  Windows 7 installation disc does not

  Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:

  If you have another DVD player available try to use this drive in your computer instead.

  If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.

  In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.

  If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Windows 7 upgrade Assistant does not work

  Well I'm number 28 on the so-called telephone helpdesk number so I thought I would try it to see if its more quickly!

  I'm trying to install Windows 7 with the Toshiba disk provided to upgrade to Vista.
  I tried 10 times or more, but when I use the wizard 'Upgrade' it stops running on the same point every time and my boots on the installation process.

  Step 2 is the problem "Download Toshiba preload component list" it gets so far * BANG * he kick me out of the facility.

  I followed all instructions turn off firewall and virus software etc.

  On 2 occasions, I had a problem different "read Failed TUWSETUP program"

  Help

  Computers are lying to make your life easier!

  Cherrs

  Hello

  When do the upgrade wizard stops exactly and what is the error message you are displayed?

  Can you also tell us what model phone you have? Support this upgrade?

  In my opinion you should also try a new and clean Windows 7 installation if it is possible for you.