Windows XP installation without success

Similar Questions

• Download a disc of windows 7 installation without my product key?

  Download a disc of windows 7 installation without my product key?

  lost and the original disc (if I have worm had a!)

  Hi Dave,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you need an installation of Windows 7 without product key.

  In order to download and install Windows 7, you need a product key. Please click the link below and see if it helps.

  http://Windows.Microsoft.com/en-in/Windows7/get-a-new-Windows-7-product-key

  Hope this information helps.

  Meet us if you encounter any other Windows problem, and we would be happy to help you.

  Good day!

• Windows update installs with success then icon notifys me that udates are ready to install

  I click the icon to install the updates and they say that they have been correctly installed, then the icon comes back and tells me that updates are ready to install, check to see if they are new updates, I think they are the same ones that have just been installed. Can someone tell me how to solve this problem? Thank you

  Hello

  The following article might be useful: How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update

• HP 5530: Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  (FYI)

  Problem: Windows 10 laptop (previously Windows 7) would not install HP 5530 wireless printer using the HP installation software.

  (Other portable, always running Windows 7, install the same software of the printer without a problem.) All computers had until then used a HP 5510 without problem).

  The printer can be "seen" by phone, via a router, in the dialogues of installation software, but 'installation network without success' has been reported: in other words, after identification and selection of the printer on the network, install "spun" for several minutes until the outage has been reported. (Installation by USB connection was successful, but still later without success in wireless network installation).

  Printer able ping go laptop all the time, and test page was printed wireless through the web page HTTP printer (e.g. 192.168.1.x) parameters.

  Firewall has been abandoned and latest drivers from the web site HP downloaded - however, Setup still not at the same point each time.

  Solution: In Windows 10, start menu: -.

  Printer Settings\Devices\Add or Scanner\Printer I want to is not listed\Add by the TCP/IP address [use the IP address identified from the display or printing settings printer] - check the box for pilot chosen automatically by Windows.

  (In other words, add the printer as a printer without using HP installation software at all.)

  Result: the printer is available (after restart) wireless on the laptop - seemingly normal and as a shared printer - wireless printing was possible.

  (Solved) (Apparently)

  According to the http://dfarq.homeip.net/2015/01/how-to-add-a-tcpip-printer-in-the-windows-10-technical-preview/

  Good luck to anyone with a similar problem!

  I'm still working 24 hours.

  (Solved) (Apparently)

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Avast for Windows O.S. #7 32 bits - I tried several times without success

  Install free Avast for Windows O.S. #7 32 bits - I tried several times without success

  Former title: Avast

  What is the error message when you try to install it?

  You have a utility existing Antivirus installed on the computer?

  Possible download may be corrupted, try to download another copy and try to reinstall.

  Also, make sure that all open programs are closed before performing the installation.

  Some of these antivirus require an active connection to the Internet during installation.

  You can also do a clean boot before installing:

  How to perform a clean boot in Windows

• I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  I get reimage opening new windows in safari instead of the links I clicked. I tried the force of suggestion smoking etc and uninstall without success. It seems very little help on this in the normal search engines. Any ideas?

  On the one hand, you cannot uninstall Safari.  It comes as part of the operating system.  So, I don't know what you've done or what you think you did, but this is not that.  Could you explain more by what you mean with "I get reimage opening in a new window?  You can post a screenshot of what happens?

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• Windows 7 - tried several times to install updates KB2160841 and KB24344419 without success

  ??? RSVP

  * original title - have tried several times to install updates KB2160841 and KB24344419 without success. What should do? also the experience of "Corrupted recycle bin__' warnings? *

  HowManage ,Configure and troubleshoot Windows updates

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Why observed my windows Media Player flat mpeg-4 video clips of my nokia n7 momile? Ive tried also nokia ovi suite, without success. What are the alternatives to play my clips on the pc

  Might be interesting to try to download and install a
  the following freeware media players:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (name of the file to download: vlc - 2.0.1 - win32.exe)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)
  (name of the file to download: MPC - HomeCinema.1.6.2.4902.x 86 .exe)

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• Windows Vista reinstall without installation disc (Acer Aspire 6920 G)

  Hello

  I would like to ask for help. About a year ago I bought this laptop with the original Windows Vista validation but key without a Windows Vista installation disc. Now, I would like to reinstall my system.

  I downloaded the file .iso Windows Recovery (of size 120 MB), it burned down and tried to reinstall Windows. I got to the stage where I type the validation key, but always when I typed that key, it appeared that the key is invalid (I checked this certificate stuck on the laptop and it seems to be original).

  Thanks in advance

  This is NOT a Vista reinstall the drive, it's a record of STARTUP repair!

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition t put it back to factory settings.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

   

  Normally, they do this for a cost of $ small.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Update installs the same update everytime I stop. The update is successful but remains as an update. KB2633171.

  Original title: update continues installation KB2633171

  I Windowd Home Premium and windows update installs the same update everytime I stop.  The update is taken with success but remains as an update.  KB2633171 is the update

  Hi whales,

  I suggest that you check the troubleshooting provided in the link mentioned below steps to solve the problem with Windows Update offers repeated updates.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  Hope this helps