Windows XP Mode in Windows 7 shows no antivirus running

Similar Questions

• Windows 10 shows a bad time in boot camp

  Windows 10 shows the wrong time. It is a big problem because it my ability to connect to some programs that I regularly use the effects. Even if I went into the Windows settings and set the Windows system clock to EASTERN time is 7 to 8 hours off the coast. I tried parameter, the parameters of time automatically detect and then turn off automatically detect with no joy.

  I heard that this happens because Apple uses GMT and Windows uses another method. I really need this to work.

  Someone at - he found a solution for this?

  OS X shows the exact time? If this is the case, change your source Windows time to be identical to the source of Apple, which is usually time.apple.com site or the use of the public NTP servers for the two operating systems.

  If you connect to a Windows domain/AD server, make sure that you have a good VPN or local connection to such a server.

  

  

• "How can I add more than 2 downloads in the downloads window?" "Downloads window" only show 2 download and do not show a third and other

  How can I download more than 2 downloads in "downloads window?
  "Downloads window" only show 2 download and do not show a third and even more, to be expected that one of the first or second full.

  This has happened

  Each time Firefox opened

  Is downloads

  Hello Mohammad.

  Can you provide a screenshot of your window of downloads that you are experiencing this issue?

• Windows XP showing ANIOApi.dll is missing

  Windows XP showing ANIOApi.dll is missing?

  http://forums.techguy.org/networking/802880-solved-wzcsldr2-exe-failing-upload.html

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19343605/19739436.aspx

  read these discussions.

  return ticket if the solutions work for you.

• I formatted a hard drive of 250 GB using ntfs and the data stored on it, my old hard drive died, so he was replaced now when I go into windows, it shows the drive as raw what happened?

  The old hd wd swarmed so it has been removed, a new one installed Windows xp now when I go into windows, it shows the active partition, but no system file and when you try to access it, says I need to format the hard drive, what happened to all the data that I had before?

  I found a program to retrieve all the data myself using easeus.com

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• Windows 7 is able to run 16-bit in XP mode installers?

  Windows 7 is able to run 16-bit in XP mode installers?

  Hi Blue_Rocket,

  Thank you for using answers Forum.

  There are a variety of modes, from Windows 95.
  You should be able to run most 16-bit applications.

  You can also download the Windows 7 Upgrade Advisor here:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dialog box of the file in the application that is running in window 7 shows all of the UNC path

  HELP PLZ!

  We use the file dialog box to open the folder of the disk file network hard. Window XP showed the path UNC path, but when we run our application (developed in vba) on window 7, full unc path has been established instead of only last name of the folder.
  example of... UNC path \\abcd\abb\abfolder in window XP file dialog shows "abfolder" and then if we see in looking in then hierarchical set of path can be seen
  but the file in window 7 dialog box shows all the way "\\abcd\abb\abfolde" as it is...
  Please suggest if some way where we can display in the file dialog box in the window 7 same folder in UNC path that showed before in XP.
  Hi Gary,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with an application developed in Visual Basics for Applications running.

  The question you posted would be better suited in Visual Basics for Applications MSDN Forums. I would post the query in the link below.
  http://social.msdn.Microsoft.com/forums/en/isvvba/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• properties for the system Windows Windows 8 shows not only remote assistance remote desktop options

  When you go into the System Properties window, then select the remote use of the window tab shows that Assistance remotely in the upper half of the window. The bottom half which is supposed to have remote desktop, choice is empty.

  Remote Desktop seems to be only available on Windows 8 Pro.

• my windows defender shows that it is off, whats with that?

  When I check-in for the security of my computer, a window tells me that windows defender is disabled; I followed the directions as to what to do, but no luck. I would like to clean my computer, because I recently had a virus that affected my hotmail.

  Thank you kindly, annie

  Hello

  ·          What anti-virus program do you use?

  ·          Windows operating system you are using?

  Some security/antivirus/antispyware products can cause this error. Try to uninstall the antivirus program, and check.

  Some third-party antivirus software will turn off automatically Windows Defender if the antivirus software has already built defender.

  Note: don't forget to enable antivirus if the issue is resolved.

• Hi, Iam using Window 7 OS, Kaspersky Antivirus, IE and Firefox.

  Hi, Iam using Window 7 OS, Kaspersky Antivirus, IE and Firefox. The problem is any url that I tried to open it shows server not found and continues after refreshing the url and then it opens. It happens with all websites

  Hello

  (1) have you made changes before the start of this issue?

  (2) the problem happen with Internet explorer and Firefox?

  (3) what version of Internet Explore do you use?

  (4) what is the exact full error message?

  Method 1:

  Temporarily turn off the firewall and Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Step 1:

  Try to run Internet Explorer mode without modules and check if the same problem occurs, here's the link:

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  Step 2: Use Manage Add-ons to determine which add-on is causing the problem.

  a. open Internet Explorer 8.

  b. click on tools and then click on Manage Add-ons.

  c. in the menu view, select all add-ons to display all the modules that are installed on the computer.

  d. for each item in this list, select the add-on and then click Disable in the information window.

  e. When you have disabled all of the items in this list, click OK.

  f. exit, and then restart Internet Explorer.

  g. If problems do not recur, repeat steps a through c.

  h. click Activate for a simple add-on.

  i. Repeat steps f through h until you determine which add-on causes errors occur.

  Set IE as the default web browser and check the status.

  Method 3: Reset Internet explore and check if the problem persists.

  How to reset Internet Explorer settings:

  http://support.Microsoft.com/kb/923737

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  I hope this helps.

• I'm a gamer. I use xp service Pack2 with windows 7 in order to run an older application without interruption to windows 7?

  Adviser advised compatibility xp SP2 download

  Hi Careysav,

  Welcome to the Microsoft Answers site!

  You can try to play the game in compatibility mode to avoid the problem.

  Here are the steps to run in compatibility mode, it applies to Windows Vista, but it's always good for Windows 7.

  To run the game in compatibility mode:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button, then

  2. click on Control Panel. In the search box, type Troubleshooting, then

  3. click on Troubleshooting.

  4. in the framework of programs, click run programs made for previous versions of Windows.

  5. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  For more details, visit the below given link:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Alternatively, you can try to use Windows XP Mode. Here, you can run programs that were designed for Windows XP on computers running Windows 7 Professional, enterprise or Ultimate editions that also meet certain hardware requirements.

  For more details, you can check here it is given a link and download Windows XP mode.

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows search engine is not running

  I installed "Uniblue Powersuite" on Windows XP and after that it worked I have found that my Windows search engine does not run in Outlook Express.

  When I open "Search for" drop-down list under file shows that all files are grey except output.

  Suite of assistance has not solved the problem.

  I installed "Uniblue Powersuite" on Windows XP and after that it worked I have found that my Windows search engine does not run in Outlook Express.

  When I open "Search for" drop-down list under file shows that all files are grey except output.

  Suite of assistance has not solved the problem.

  Uninstall Uniblue Powersuite.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.  Remove everything it finds.

  Reset.

  This may not fix the result, but it will eliminate what has probably caused (as well as the riders who came with her.)

• can't c:\windows\system32\rundll32.exe to run on my windows xp

  Original title: windows xp

  can't c:\windows\system32\rundll32.exe to run on my windows xp

  Hi carolreynolds,

  ·         When exactly do you get this error message?

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  ·         Are you able to boot to the desktop?

  Answer with the information required to help more.

  You can also see the article:

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  For reference:

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340