Windows XP of windows applications and fonts too big

Similar Questions

• Windows Go 431 folder too big...

  Hi, I have a computer that is running windows 7 factory that the hard drive is too big, so I checked all the files on the hard drive and the windows folder is 413 gb... why this might be? I always run clean disc ups most of the people here are groaning about 16 GB in grand but 413 GB... It's huge!

  any help will be appreciated!

  Adam

  Adam

  To study disk space, use download and install Treesize (freeware).
  http://www.Jam-software.com/treesize_free/

  Information about Treesize
  http://www.Jam-software.com/treesize_free/

  When you open Treesize scan select in the Menu and you will see a list of drives. Click on C and it will generate a list of files.

  Display names and 6 larger files sizes and the total at the top of the list.

• I tried to send a file in outlook express and its too big, how to remove it it keeps trying to send it and blocks all other messages

  I was sending pictures via outlook express and an error message came and said that the file was too big to send what is good, but how do I stop trying to send it.  He says still sending mail, so everything is blocked and it shows 1 point in the Outbox.  I'm very well that there are not sent but how do I get it out of the Outbox to stop this "send mail".

  Check: File | Work offline and in: reviews | Layout: uncheck the preview pane. Can delete you it now?

• Develop an iOS on Windows application and get error 90161 downloading Mac

  Hello

  I have developed an AIR for iOS app in Flash CC 2014 on Windows. I use MacinCloud managed server to download .ipa to store for testing. This is the service of virtual server with Mac OS. They have the pre-installed Application Loader.

  I did [REB converted p12] certificates on Windows and installed temporary profile. I did another certificate on Mac and it has added to the temporary profile too.

  I get error when you try to download of the Application Loader:

  ITMS-90161 ERROR: "Invalid Provisioning profile. The configuration profile included in the bundle [Payload/yyy.app] com.xxx.yyy is not valid. [Missing code-signing certificate.] For more information, visit the portal developer iOS. »

  Stuck here. Tried to add cert done on Mac. Flash doesn't and stops compiling.

  Any help will be much appreciated.

  Apple test flight needs an IPA distribution, which has a key beta-reports-active in the descriptor of the app. A profile of development won't work.

  If you have access to a Mac and to a HTTPS server, look in get this app, it's much more simple announcement of builds:

  Mac App Store - BetaBuilder for iOS Apps

• Windows 7 backup takes too long and is too big

  I tried to use backup several times now, but keep frustrated with the time it takes and the size of the backup that results.  It took exactly 13 hours and 3 minutes to save 640 Gig internal drive my laptop on my external drive freshly formatted 1 Terra.  Internal drive has only 274 used Gig, but the backup is 405 Gig; about 150% of the source! Why backup taking so long?  How can the backup be much wider than the original?

  The backup being larger than the source, in my case anyway, the reason is that by default Windows Backup backs up "Files in libraries and folders for all users" and it also makes a full system image - so my user data is backed up twice.

• Unable to connect to the store Windows and Windows applications and error message "your pc is not connected to the internet try again."

  Original title: apps windows 8 does not work...

  Mr President, I am using window 8, my internet is working fine on internet explorer and google chrome... but the window 8 AppStore does not work... everytime I use to open window 8 apps, it shows that your pc is not connected to the internet try again, but at the same time my explore works... v.ery... so please solve this problem...

  Try this

  WIN + W > Search troubleshooting and select it > under "system & Security", select "fix problems with windows update. Let him look for problems. As a first step, it does not detect anything, but it will give you the possibility of troubleshooting as an administrator. Select it and just hope it solves your problems.

  This worked for me and am now able switch to a Microsoft windows access account store and download the updates even on dial-up connection.

• Windows 7 - display size too big

  Just replaced XP with Windows 7 on my Dell PC and now the graphica are much too large for the screen. I tried to change the resolution, but it makes it just worse. Did I miss something?

  What resolution your monitor supports? If its a LCD/LED, they generally cite a "native resolution", try setting the PC to that.

  What resolutions have tried? - http://windows.microsoft.com/en-US/windows7/Change-your-screen-resolution

  Go to the website of support for your PC and download that latest support W7 graphics card drivers for your version of windows (32/64 bit) they provide and install them. Reboot and see if they help.

  If this is not the case, check the DPI setting - http://www.sevenforums.com/tutorials/443-dpi-display-size-settings-change.html to ensure that his game initially to 100%, if this helps then make "tweaks" as required.

• Windows Server 2011, ISO too big for DVD

  I download a trial of Windows Small Business Server 2011.  I have the ISO 6.35 concert, but will have a tough time getting to fit on a 4 GB DVD.  Y at - it a smaller ISO, or I can it will break?

  Get a double disc layer.

• Logic Pro manual iBooks font too big on iMac

  Hi guys, I just purchased Logic Pro X from the Mac App Store and then downloaded the User Guide in iBooks. I opened on my updated (10.11.3 El Capitan) late 2009 iMac (Quad Core i7 16 MB RAM) and the police is huge - I want to say you get 2 or 3 words per line, 10 to 12 words per page which is completely unusable! My other books in the iBooks are all very well, but these Logic Pro X manuals are unnecessary. Someone at - it else found this, Apple says nothing about this?

  Thank you James

  Have you tried from here several times...

  

• The ' OK and apply "buttons disappeared after I changed the DPI and made too big screen. How can I get back them? I can change the DPI back but I can't OK it without the buttons!

  How to restore the ' OK and apply "buttons to change the DPI back to original size

  How to restore the ' OK and apply "buttons to change the DPI back to original size

  1. you can try just pressing the entry instead of the apply/OK key. It should work normally.

  2 If #1 does not work, go to safe mode and the CIO adapt them again.
  How to get in Mode safe:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. Use the up/down arrow and select Mode safe for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Given that the upgrade to Windows 10 my screen is too big so I can't access my charms.

  Since the upgrade to Windows 10 screen is too big and the edges are missing.  When I put my cursor on the edge of the screen, nothing happens, so I'm unable to access the charms. It also means that some of my programs are missing device boxes for example print.

  desktop or laptop model?

  may be wrong screen resolution and/or lack of drivers VGA

• Windows 7 and other programs cannot read or burn cddvd

  My system not usually read or burn on my cddvdw drive. I'm on a Toshiba Satellite L500D with a TSST TS-L633C, and after I had these problems I installed Toshiba DVD player as well. From Toshiba DVD player can play the discs very well! Nothing else will accept that there is a DVD in the drive ~ including Windows applications and Microsoft themselves. Until I start to play using the DVD from Toshiba drive, the disc in the drive is simply the drive "hunting" or at least that's what it looks like.

  I noticed in "Device Manager" this drive has now two drivers that are associated with ~ the pilot Windows and a pilot separated for the reader to DVD from Toshiba. NOTE: This player has been installed AFTER that I started to have problems.

  At some point I uninstalled all CDDVDW drive altogether and rebooted the system. Windows recognizes that I had 'new device' and installed his "pilot new as well as the driver Toshiba DVD Player as well. Still no joy in the use of this unit with anything other than Toshiba DVD Player.

  Here, anyone has any new ideas?

  PS: I ran the Fix Tool from this site with no results!

  Rock 'n' Roll-live!

  Hello

  "A DVD will be recognized by the Toshiba DVD player, but by nothing else in any OS I
  on this system. (I have Vista, Windows7, and PCLinuxOS tri-boot.) »

  ---------------------

  Since the 3 operating systems fail to recognize the drive correctly I think that the problem is hardware related.
  drive speed, wiring, circuits on the motherboard. Or the real player has a problem. This isn't very
  likely that all 3 OS developed a similar problem at the same time, it's why the only things remaining
  are the material and the reader. Check the BIOS, although given that it could have been written a glitch
  in it.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Confused about Windows 7 and vRanger connection

  I pulled my PC of laboratory for testing of vRanger connection, but the client could never connect to the service. He has worked the last time I got it running. I checked and the services were running. Version = 7.0.2. Thinking that something went south with my lab pc I got a laptop with Windows 7 Pro 64-bit and 6 GB of RAM. I installed the same version of vRanger connection and after a qualified installation, I found myself with the same exact error - could not connect to the service. Then I read about vRanger connection plug and see that Windows 7 is not listed as an OS supported to install more. Is this correct? Should we use a server operating system to run vRanger connection?

  TIA

  First thing to check when you see a glorious "Could not connect to service", is to go to the Windows - Application and Services - vRanger connection newspaper Service event viewer and retrieve the last error. There could be a clue.

  Talk about your case, I guess that's a "feature", we met at Ranger 7.x.

  You MUST be logged in under the account that you use for care to ensure that the installation or upgrade was successful.

  If it was a facility clean, better delete everything, including SQL instance. Program directory Files\Dell\vRanger recheck if the files are actually deleted. You need to maybe restart the server and go through Control Panel once again to uninstall.

  Then log in to the zone with officials of department store and run executable.

  Another thing I noticed during the upgrade is if Ranger DB is attached to an instance of SQL 2005 'foreign', usually BackupExec. Logic of ranger fails completely and install utility keeps SQL Express 2005 (impossible to create a new instance), which does not work with Ranger 7.x.

  But it is a different story.

• My icons and fonts are great for my screen

  my icons and fonts are big for my screen. In addition, they are everywhere. I tried to make them smaller and not luck.

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         When there is change on the computer?

  ·         Change is specific to one program, Internet Explorer, or sometimes on the desktop as well?

  I suggest that you follow the steps described in the links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/show-hide-or-resize-desktop-icons

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-fonts

  http://Windows.Microsoft.com/en-us/Windows-Vista/the-desktop-overview

  Also, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

• default font in Windows 8 is way too small. How can I change? Don't waste time telling the display and appearance. Does not help.

  in the directory, the file names are much too small.  You want to change font Times New Roman 12, for everything.  Expansion to 124% does not affect the file names.  Don't want to pay for the update driver software as it will not fix this.

  Hello

  I'm not on my machine to win 8 to check right now, but if you right click the desktop, then select the screen resolution, you should see 'Make text and other items larger or smaller'

  Click on it... and down the middle of the screen that opens, you should see a drop down for different types of text (icons and etc..). There is also a menu next to him where you can set the font size for the different types of windows, icons and etc...

  I don't think that there is an option to select the Types of fonts such as Times Roman, for example, but there could be...