Windows XP SP3 Pro problems

Similar Questions

• PROBLEM WITH INSTALLING WINDOWS WINDOWS XP SP3 PRO 8.1

  When I try to install the full version of Windows Pro 8.1 on my computer drive I get two error messages.

  1 point entry procedure '_CxxFrameHandler3' not found

  in the "msvcrt.dll" dynamic link library

  [2] the file 'autorun.dll' could not be found or is damaged. Error code is: "[the 0x7F]."

  How do I fix errors on my Windows XP so I can download Pro 8.1?

  Any help would be greatly appreciated!

  Hello

  Follow these steps until you try to install Windows 8/8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  Download and run the Windows 8 Upgrade Assistant of to see if your machine is compatible Windows 8:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "System requirements" Windows 8 ".

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  See you soon.

• Windows XP SP3 installation problem

  I have a HP Media Center edition (2002) with Service Pack 2 of Windows currently installed.  Microsoft has stopped support for effective SP2 online July 13, 2010.  When I try to upgrade to SP3 using automatic downloads or by going to the site to update for Microsoft, the installation does not complete.  The error code that keeps dislplaying is the error Code: 0 x 80070002.  I tried to use the help on the Microsoft Web site to correct this, but it still does not work.  Any information on how to solve this problem?  Thank you

  Try MSFixit for the problem, or do the steps manually according to your preference:

   

  http://support.Microsoft.com/kb/822798

  Just rename the file Catroot2 usually solves these issues, for me anyway. Restart and try again the file to network install of SP3.

• Windows xp sp3 update problem

  I had to redo my office and I have windows xp sp1 and now I went to windows update and now there is no available update because I have not sp3. I'm having a little problem finding. I searched the net and found one but it says do not download if install on 1 pc. It's only for pc multi for networking. I hope someone can help me please thank you very much.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 Installation Package for it professionals and developers network (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Problems on Mac OX 10.6 V.S. Windows XP SP3

  Hi all

  I have a problem with my MacBook Pro.

  My system is Mac OX 10.6, but I use BootCamp to 10.6 to implement the portable Windows XP SP3 on the same computer. Then I put in place LabVIEW 8.5.1 on Windows XP system and use Agilent 823578 USB/GPIB Interfaces to communicate with locking SR830 amplifier.

  When you use Angilent connection Expert, I could communicate with SR830 by Agilent 823578 USB/GPIB Interfaces. However I couldn't use relative visa in LabVIEW command, such as opening VISA, to connect with SR830.

  On the other hand, I use the same program on the DELL Windows PC to communicate with SR830 without any problem.

  So I was wondering is it a problem of compatibility of MacBook Pro and Mac OX 10.6 with Driver of instruments?

  I will be appreciated if someone could help me to solve my problem. Thanks to you all.

  First, you must enable support for Tulip so that MAX recognizes the controller of agilent. In MAX, you select NI-VISA under the software section. Click on the visa, and then under MySystems Options > General settings, select passports. Check the box for NiVisaTulip.dll. If you do a view > refresh, the controller must be included so that you might have to restart. When MAX lists the agilent controller, you should be able to scan for instruments. It's what will update the visaconf.ini file.

  I'll sort of memory on it and have only done on windows pc. I don't really know if there are problems with it under a virtual machine on the Mac. There are numerous links on tips related to the use of controllers of agilent with LabVIEW so you can do a search to see if I missed the details.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• problems of xbox 360 with windows xp sp3 wireless receiver

  problems of xbox 360 with windows xp sp3 wireless receiver

  Hi Frank Lucas.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can see the steps outlined in the article below

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  You can also post your query on Xbox Forum

  http://forums.Xbox.com/

• Performance IEEE 1394 Windows XP SP3 Adobe Premiere 6.0 problem

  I'm trying to capture video using Adobe Premiere 6.0.  When I got Win2K installed it worked fine.  I have upgraded to Windows XP SP3 and first stopped working properly.  A clean installed Matrox RT2500 - it's the video capture card, I bought with the kit Adobe Premiere - according to the instructions, as well as first - including the 6.01 update.  Now when I connect my Sony DCRTRV520 camcorder via firewire IEEE1394 and try to capture the Hi8 video I recorded, it won't record a few frames, then stops.  Matrox video tools say that the IEEE 1394 device has stopped working.  First capture options indicate that the camcorder is not recognized.

  I found a forum which indicated that the problem was with XP sp3 drivers for Texas Instruments OHCI 1394 device - indicating that the sp2 and sp3 downgraded the 1394 to S100 speed device performance.  I found an article in the database saying MS was aware of the problem and finally got that to work (KB885222) download

  http://download.Microsoft.com/download/9/0/6/906f2f67-39c4-48bc-8558-86833d4cbc16/WindowsXP-KB885222-v2-x86-enu.exe

  It will not actually install on the PC I am running SP3 not SP2.  It's really frustrating because the system worked very well under windows 2000. Even worse since I have a lot of old video - not stored on DVD or transformed into films which I was hoping to work for presents for the family, this Christmas.

  Anyone know of another - hotfix - download or similar which will fix this problem?

  Hi John,.

  Thanks for posting in the Microsoft Community Forums. I suggest you post this question in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error?

  I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error? This is the summary of errors:

  AppName: explorer.exe AppVer: 6.0.2900.5512

  > ModName: ModVer shellext.dll: 4.0.468.0 Offset: 0000ca 93
  Please help thanks :D

  This problem is likely to make for an extension of the shell badly installed on your machine.  The way to solve this problem is to download and install the free software "ShellExView".  When you run this program, it displays all shell extensions that are installed on your machine with a checkbox next to it.  By unchecking the box, you can disable this particular shell extension.  By trial and error, you can find the one that is causing your problem.  Once you find it, the solution is usually apparent (usually UN-installing and re - install an application associated with this file extension).

  ShellExView: <> http://download.cnet.com/ShellExView/3000-2094_4-145729.html >

  HTH,
  JW

• LifeCam Studio on Windows XP SP3 problem

  LifeCam Studio on Windows XP SP3. Connection camera after installation of the software (driver). Not dedect camera. Error code 28. Massage: "the installation of the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor. "Windows Vista on the same PC works fine.

  Tried all Microsoft directed - no luck.

  Help, please!

  Yuriy

  Hi YuriyBelitskiy,

  1. Did you the latest changes on the computer?
  2. What are the steps you tried to solve the problem?
  3. When was the last time it was working fine?

  See the article and try the steps mentioned, check if it helps.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• Windows 8.1 update problem (I want to improve my Windows 8 Pro with media center pack)

  Hi, this is Rafi K, I recently installed win 8 64-bit on my computer dell laptop XT3, so activated my product key with MEDIA CENTER PACK, so now I want to improve it to WIN Pro 8.1. But I keep if you search windows 8.1 update, but it says "sorry this update is not available for your PC or you can run an edition of windows that does not support the update of the store", is if there's someone who can help me to update my windows 8.1 pro. Thank you! am waiting for your valuable response.

  Hello Rafi K,.

  Welcome to the Microsoft community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the deciphering of the question, you can not upgrade your computer Windows 8 to 8.1 of Windows. So, I suggest to try the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards

• driver problem TSSTcorp cddvdw sn-208bb for windows 8.0 pro

  Hi I have updated from windows 8.0 windows 8.0 pro. My CD player stopped working following is the error coming out wen I run peripheral troubled shoot. can anyone help please. My laptop is Toshiba Satellite P845T-S4102.

  

  Hello

  Try to uninstall one or both of these programs... which ever you have... They have been known to cause this problem...

  TOSHIBA Recovery Media Creator

  TOSHIBA Disc Creator

• Problem with Adobe After Effects on Windows 8.1 PRO CS6

  Hi Adobe Systems, guys, I would like to know when the error will be the solution presented Adobe After Effects CS6 (Latin American Spanish Version) running Windows 8.1 PRO and get the following error message.

  

  I tried the most recent update available 11.0.3 but does not correct the problem. I wonder when will be ready the solution car with Illustrator CS6 also was the same but with the solution described in this page, http://helpx.adobe.com/illustrator/kb/illustrator-does-not-start-windows-81.html has been resolved perfectly.

  Thank you command prompt as we need urgent help to to use the software in his Spanish version as was purchased. Thank you

  Here you go:

  http://Adobe.LY/AE_CS6_1104

  "After Effects CS6 (11.0.4) updated: bug fixes for rendering 3D traced the beam engine and Spanish version on Windows.