Windows XP system using more than 50% of the CPU

Similar Questions

• Explorer.exe takes more than 90% of the CPU when I opened start > menu programs

  IM using Vista Ultimate with Aero theme. I am a single user of this computer. When I open Start-> programs menu, an explorer.exe process takes 90% and more CPU resources and remains to be done (even if I don't move the mouse or press any key on the keyboard) until I close the menu programs. What continues?

  Hello Serresjio I can almost guarantee you that the troubleshooting steps will flip over as soon as you start back. my suggestion is if possible, remove the hard drive and the scanner on another computer with Malware Bytes Anti Malware, Avast! Antivirus and Spybot Search and Destroy, AVG etc. (all updates of course). usually, I use this method when everything has failed. Don't be too surprised boyfriend so often that I have a USB-(e sata, 1394, 2.5"/5.25 IDE) converter for the toughest jobs.

  Everything do you to not lose hope and format as most of the people do. I have corrected problems of windows than most irreparable thought technicians. It's just a matter of removing the cause and repair the damaged windows files. the problem can be solved the difficulty is just to use the proper tools/software. Lately I use Avast and MBAM with 100% recovery. It IS not JUST a single unrecoverable machine!

• [Mac] Notifier updates AAM responds more than 99% of the CPU

  Every morning, I have the AAM updates notifier in my activity monitor stuck at 99% and beating Pavilion does not.

  

  At this point I seem to have few options but to turn it off via the response to this link StackExchange.

  Someone at - it real solutions other than my solution? Or ideas of things I can investigate what may be causing this problem?

  Thank you.

  There is no more updates for one of these programs here, other than later http://www.adobe.com/downloads/updates/ which you can update manually without notifying update of aam.

  remove the update notification, remove Adobe Updater in the OS X menu bar?

• more than one of the global variables

  Hi all
  I use the formula of oracle 10g Release2
  Windows 7 64 bit
  I want to use globalvariables
  I am able to pass a variable, but when I try to use more than one variable
  The columns Form_A and Form_B data non-base has columns of data.
  then, it is not passing the value but works with a variable.
  Someone knows how to pass several globalvariables?

  Hello

  try something like this...
  example:

  begin
  
  if :emp.deptno is not null then
  :global.pass_value:=:emp.deptno;
  set_block_property('EMP',DEFAULT_WHERE,'deptno='||:Global.pass_value);
  go_block('emp');
  execute_query;
  end if;
  
  if :emp.empno is not null then
  :global.pass_value1:=:emp.empno;
  set_block_property('EMP',DEFAULT_WHERE,'empno='||:Global.pass_value1);
  go_block('emp');
  execute_query;
  end if;
  end;
  

  hope this helps you...
  Sarah

• Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum s

  Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?

  I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.

  Hi John,.

  Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.

  I wonder if you have checked your system requirements before you download Acrobat.

  I would also ask to share with you the screenshot of the error message with us.

  You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  If you were installing DC, check out the following link to download.

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)

  Concerning

  Sukrit diallo

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.

  Mounting my drive hard exFAT fails more than 70% of the time in Windows XP.  I downloaded the Microsoft exFAT driver (Windows XP-KB985704 - x 86 - ENU.exe) and installed XP Service Pack 3.  However, when I turned the computer off and restart it, the disc will install.  I'm having this problem with several readers.  Looks like the player trying to get (new Windows hardware sound chimes when you plug in the drive).  Then rapidly thereafter dismantle it quickly sounded. When I take the car and plug it into my Mac, it is still rising.  Is it possible that I have to do something more to install the Microsoft exFAT driver?  The drive is made by G-technology.  I also tried to remove the disc before you turn off the computer and turn off the computer with the mounted drive yet.  Whatever it is, the reader is not recognized when I restart the computer.  I ran an on the disks and sometimes Apple disk utility, I get the message that the reader has a cluster to run repair disk.  After that, the player either go up or not.  There is no virus on the Windows computer.  The operating system is a novelty.  I use the system only to run AVID.   No other software is on the computer other than what came with it.  The computer is a HP 8600 workstation.  I mount the drive through a port firewire 400 on the computer using firewire 400 to 800 cable G technology.

  Hi motionpicturedirector,

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click on Start , then run.

  (b) type msconfig , and then click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services , and then click OK.

  (d) when you are prompted, click restart to restart the computer.

• Can I use more than one flash drive to ready boost on Satellite L650/0ed

  Hello

  I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

  In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

  Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

  Thank you
  -Brent907

  Hi mate

  Please check this Microsoft page that describes the ReadyBosst
  http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

  There, you can find this statement:
  + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

  I hope this can be useful!

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• Can I put my Compaq Presario SR5030NX to win 8 and can it use more than 2 GB of memory so?

  Hello

  I have Windows 7 on it now and it works fine, but the specs say that it can take only 2 GB of memory. I didn't know if the Compaq Presario SR5030NX is capable of running Windows 8 and if that would allow him to use more memory, or if the memory is a hardware limitation.

  Thank you

  Tania

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  According to the specifications of your system, the motherboard can support only 2 GB of maximum memory:

  http://support.HP.com/us-en/document/c00910113

• Can transfer easily to be run more than once on the receiving system?

  Can transfer easily to be run more than once on the receiving system?

  I installed Win 7 on a separate XP drive and I am able to switch between them starting from their respective readers.

  I made an easy transfer between them and now intend to install it and test my programs on Win 7.  Once I've got everything working properly, and that all migration issues are resolved, I would like to make a clean second run Easy Transfer of XP just before the final switch to Win 7.

  "Clean run" I mean I want all the Win 7 system to be completely replaced by the new data and the parameters of the XP system.

  Easy transfer will do that?

  What I would recommend that you do, is create a new account user in Windows 7, then restore the backup Windows Easy Transfer in the new account and delete the old account that you created in the first place.

• Slow Server 2008 performance when you use more than 1 CPU - bug?

  Hello

  It seems that when I run Server 2008 on one of my boxes 3 10.5.7 if I use more than 1 CPU in the settings, the ankles of machine the CPU while booting and then during the use of the operating system.  Normally, I have to run all 3 of them at the same time... and if I get all 3 virtual machines running, the CPU remains just pegged and slows down the machine.

  Then, if I close everything and change the settings to 1 CPU, virtual machines work fine, the CPU barely sees any activity and 75% of the 8 GB is used and it can run for weeks at a time without any problem.

  My 3 VMs

  1 Server 2008 x 64 w/Exchange 2007 2 GB, 1CPU

  2 Server 2008 x 86 File Server/Anti-anti-virus/utilities/Quickbooks, etc. 1 GB, 1CPU

  3 Server 2008 x 86 Active 1 GB, 1CPU Directory

  My Mac run all 10.5.7

  1 Macbook Pro 2007 2.33 Core 2 Duo

  1 mac Pro desktop 2008

  Rig EFIX running 10.5.7

  1 EFIX EP45-DS3R Q9550

  all the boxes are running 10.5.7 with the EFIX running 10.5.7 platform server and I can recreate in one of the 3 machines, 10.5 server or workstation, etc.

  Yes, I have the tools are installed and uses the latest patches, software, etc.

  Thanks for any help...

  VCPU more inside a virtual machine using could be a big problem, if you don't have much physical basis.

  If you set vCPU # = # pCore, then you will have several performance issue, cause you VM hangs (during its run) ALL of your hearts.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Configuration of 10g to use more than 1 CPU

  Hello experts,
  
  I have server Oracle 10.2.0.4 Enterprise Edition running on a Windows Server 2003 - Enterprise 64-bit.
  
  * The server has 4 Xeon processors *.
  
  We have a performance tool that we alert to an enrichment of the CPU.
  
  It seems that Oracle uses only a SINGLE processor.
  
  Is this normal in a 4-processor server?
  
  Can I make a configuration change to allow Oracle to use more than 1 CPU a CPU?
  
  Thank you very much. John

  You have several active sessions simultaneously (i.e. normal operation OLTP) relatively fast SQL statements running? Or if you use with a handful of active sessions that each runs relatively long SQL statements (i.e. normal DSS / operations data warehouse)?

  Unless you explicitly prevented Oracle to use several processors, it will use Fortunately each processor on the server. But if you have only one session active at a time and that the session is not running of the parallel operations, you would only end up using one of the available processors.

  Justin

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

  Is it possible add more than 2 GB of memory?

  What happens if I add e.g. 2 x 2 GB?

  Intel says GM965 supports 4 GB max memory...

  BR,

  Mikko

  Hello

  No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

  > What happens if I add e.g. 2 x 2 GB?
  I think that nothing will happen ;)
  Either your laptop will not start or will start the laptop but the full RAM will not be recognized