Wine and vCOPS

Similar Questions

• Difference between BIOS version 1.40 - win and BIOS 1.40 - trad

  What is the difference between version 1.40 - win and BIOS 1.40 - BIOS trad?

  Win version is the version that we can and must be installed when Windows is running. It runs as an application.

  Traditional version is the version that must be installed using the floppy or USB key.

  Interesting paper on updates to the BIOS, which you can find on http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm

  Check it out.

  One more thing: what model of laptop and operating system are you using?

• How to set up and enable the WINS and WINS-R resource records?

  How to set up and enable the WINS and WINS-R resource records?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• Cc of Photoshop [began to shoot pictures of my wines and place them with grain or noise above]

  my current photoshoo began to shoot pictures of my wines and place them with grain or noise on top. I tried to solve this problem without adobe success Ive deleted the program and downloaded without success on the issue of fixing.

  Make sure that Cache levels are set at least 4 under preferences > Performance.

• I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  I'll go the Mac of the victory, I can turn off my Adobe products in Win and turn them in Mac?

  Lars-Olof

  It depends on what products are - can tell you which?  If they are products of creative cloud then Yes, you can use either platform (or both) for a subscription to creative cloud.  If they are produced Creative Suite, so it becomes less likely.  If they are produced CS6, you can request a one time platform swap.

• I own 13 element to Win and just got my Mac Book so I downloaded the Mac version of 13 items and trying my serial number, but get the message that this serial number is not valid (I type the exact Win serial number I have my account

  Hello

  I have 13 element to WIN and just got my MacBook so I downloaded the MAC version of 13 items and trying to allow my serial number, but the message that this serial number is not valid (I type the exact Win serial number I have my account on the Adobe website)

  Since version 13 is no longer marketed, I will assume that you are since long TIME 30 days return policy

  You'll have to buy version 14 for your Mac... or install a software emulation to then run your program Windows on a Mac

• Hyperic 5.8.2 and vCOPs Version Beta Build 2068011

  Hello

  I was sent Hyperic 5.8.2 and vCOPs last Beta Build 2068011 release then installed Version the Hyperic inside adapter.

  VCOPs, I only see metric of resources that I picked up in Hyperic, even if Hyperic collects data. Can someone explain why?

  Thank you

  Frédéric

  You shouldn't be scared

  In hyperic UI go > Administration > followed by default

  Find your resource (for example Linux) > change the metric model

  Search for your metric > indicator column = YES

  BTW,

  I don't see your settings in my environment.

  You speak of 'Process' of Linux resources?

• I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  Please check: a product for another language or version of trading platform

• After update Itunes 10 to WIN and Iphone 6 do not sync.  I tried most of the solutions I found in support.  Suggestions welcome.

  I am more able to synchronize Itunes using the USB between WIN 10 PC and Iphone 6.  I've never had a problem until I recently installed the latest updates of ITunes on my PC and the phone.     Win 10 Itunes version 12.3.3.17 Iphone IOS 9.3.1.  Sorry that I wasn't able to thin Iphone Itunes version however was informed after checking the updates that I was using more current.   I tried most of the solutions found under Apple support, including the abolition of the lockdown on my PC Itunes folder as recommended.  Hoping someone has a solution.  Very frustrating when something worked very well and no longer works after installing the latest updates.

  What happens when you try? The phone is no longer recognized by iTunes? If so, try the steps here:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Red wine and the keyboard

  I must open my satellite A30 303 and clean the keyboard of wine.
  but I can´t find a screw in the middle of the computer, it undergoes a few keybutton?

  Ball

  Hi ball,

  It's a situation very oddish. It can be very dangerous for the motherboard. You he will never b better to contact the Service partner and ask them to clean it up. If you try to do this alone and after this Service partner can see this laptop has been opened you can lose the warranty.

  Be very careful. In my opinion the guarantee is very important.

  Good bye

• Clone of Win and Time Capsule

  Hello.

  I am currently on a MBPro, with El Capitan, Bootcamp and Windows 10.  I have a Time Capsule for wireless backup.

  Will it partition and format the time Cap. While Win Clone can use it for backups?  Or can I just format the whole TC in a format usable by OS X and Windows 10?

  Thank you

  BKB

  You don't have to and can not change the format of the time Capsule; Since this is a network drive, it'll be available on all computers on the network regardless of OS file system support.

  (138940)

• VPN site to Site, LRT214, Windows network active directory DNS, WINS, and DHCP

  Hi guys

  New to the forum. I'm trying to set up a network between 2 sites (one site to another). Each location has a DC with its own protocol, dhcp, dns and wins on the same domain service. I bought 2 LRT214 to establish the connection between the 2 sites.

  I tried searching, but all results are pretty generic (IE assuming you will use the LRT214 as DNS DHCP etc.).

  I went through the pages of the router configuration, and there are so many options. For my particular configuration objectives, which will be the best way to do this? Open vpn? EasyLink vpn? I think I'd rather do a standard vpn configuration, but then for that I have a lot of questions such as: security methods to use (FROM THE, 3DES, SHA1, MD5, etc.). can I export a cert of AD and import to the router, or export from the router and import to AD?

  I know the questions are in all directions and there is much more that I don't specifically know until I get by configuring this router at both ends. Just trying to come up with an initial plan. I guess someone must have made a similar setup and would like to know what is a good start (maybe less safe to operate), and while I get more familiar and it all worked, start to down to safety.

  Is there maybe a guide who walks through this installation with explanations of each parameter type?

  Sorry for the long post and thanks for any direction.

  I suggest you use the gateway to gateway installation and use all default settings it for this time. To start, you can try this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=240cfc1d772642dfad1deb7500a2fa6c_Creating_an_IPSec...

• Office applications such as Word, Excel to 8.1 win and how to access

  I am trying to access desktop applications on my HP ENVY TS 15 Notebook PC, model 15-J009WM. My product number is EOM27UA. Since I'm new to 8 to win, I have not ben able to locate and run applications Win Office on my laptop.

  Hello

  Have you actually PAID for the product Microsoft Office? The product will not come to default Windows 8.1. If so, please try:

  • Hold down the Windows key, press Q
  • In the Excel type search box

  Can see you? Click on / or tap it to go to the - same for Word.

  Kind regards.

• PSC 1510 communicates only with the new update to win and the new HP software.

  PSC 1510 does not communicate with the new upgrade to Windows 7 and the new HP solutions software. However, I am able to print from the PC. I've uninstalled and reinstalled twice and downloaded the Win 7 patch.

  All thoughts.

  PC Wizard

  See the thread for: Missing fie for instalation--C:\Windows\system32\HPZidr12.dll for resolution.

  Thanks for your help,

  Connie

• I have CS4 for Win and moved to Mac - Help!

  Hi Forum, I hope that this is not a question without an answer, but I'm worried that it might be so.

  From 2015, I have moved to the iMac and now use Capture One Pro.

  Very well.

  I have Photoshop CS and CS4 for Win. (full license)

  I would like to install CS4 on my Mac, but no one seems more to sell it. I would like to use, smart objects, sewing and others.

  How to keep my use of CS4, without having to pay monthly to CC, or run a separate Windows?

  Suggestions, please... I would be very grateful.

  Thank you, in advance.

  Aynsley

  CS4 is too old for Adobe offer a swap of platform

  You can install http://www.parallels.com/ "emulator" on your Mac to run Windows programs