WinTV-HVR 850 play on WMC-TV, but there is no sound

Similar Questions

• channels digital vs analog with Hauppauge WinTV - HVR 850 with Windows Media Center

  I just bought a Hauppage WinTV - HVR 850 hoping to be able to use my computer as a DVR and record some TV series.

  Do not have an HD antenna on our House and have basic cable (which has analog channels, but we can also take digital channels on our tv, which has a tuner).  When I plugged the cord to cable TV from the wall outlet at the end of this device, he searched and found only the analog channels (I tried with only the antenna mounting and it is like 3 stations).  I recorded a show on one of the analog channels and it was fuzzy.

  Is it possible to hook it up to my computer so I can get HD cable channels?  We will get an HD soon of our cable company box.  I wonder if he has 2 'out', so I could split that and I have only once to my TV and the other which could plug into this Hauppauge thing? Or the device will do only analog cable and HD with the antenna?

  Any other suggestions?

  You can return the tuner?
  The HVR-850 is a cable analog / ATSC tuner.  It cannot set Clear-QAM (digital cable clear.)  I'm sorry.
   
  The HVR - 950 Q can set Clear-QAM, however.  Note, however, that this Tuner cannot be switched on the fly between modes - you choose which you want (analog cable, or clear-QAM) during the TV configuration.
  

  There are a lot of tuners out there which, frankly, are far more capable than what is the HVR-850.
  Is this a desktop or a laptop?  If a desktop computer, what you have for the available expansion slots: PCI, PCIe, or not at all?

  Another question / comment:
  Media Center for Windows Vista can't Clear-QAM, unless your version includes TV Pack 2008 (not available for download, by the way.)  "It was an option installed by OEM).  Some manufacturers of tuner, however, provide "workaround" pilots who are MC think it's a tuner ATSC (which is supported.)
  Could you at tasks > settings > General > about > version of the software and after the version number that appears there?

  Kind regards
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DVD plays video, but there is no sound?

  DVD plays video, but there is no sound? XP

  Maybe install an AC3 Filter would be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3Filter downloads
  http://AC3Filter.NET/wiki/Download_AC3Filter
  (tests - AC3Filter 1.63 full b)

• I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  HI - what device you are playing it back on?

• Audio playback but there is no sound in the timeline.

  Audio playback but there is no sound in the timeline. I imported an XML from final cut PRO 7.0.3. For the most part all right, but I've encountered a weird problem. There are some audio coming, but who should not be there. I went through each track and even deleted all the sound elements of the time line. But he continues to play the audio. I tried to make, close everything down and exporting section too and it's still there.

  Hi Rio, thanks for taking the time to answer this dilemma. Clean the media Cache did not work.

  Maybe I could... wait.

  Yes. Copied and pasted the timeline in a new sequence. So far so good. Audio seems to play correctly.

  Thanks again.

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Why can I not hear the videos in the screensaver with WLPG? I can see them, but there is no sound

  Running windows 7.  Any new system.  Videos will be executed for the screen saver, but there is no sound.  What's wrong?

  How does this relate to the features of Windows Update?... .for windows Live Photo Gallery?

  You will find support for Windows Live Photo Gallery in this forum: http://windowslivehelp.com/forums.aspx?forumid=cafb0556-8959-49b9-afeb-635314aa02f3

• When I download a movie I can watch it, but there is no sound. I tried different and same thing picture no sound. Help, please.

  the picture is there but not sound

  When I download a movie I can watch it, but there is no sound.  I tried different and same thing picture no sound. Help, please.

  Thank you

  miklee

  No guarantee... but installing an AC3 Filter can be
  worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  AC3 Filter
  http://AC3Filter.NET/wiki/projects/AC3Filter/releases (scroll down and try - AC3Filter 1.63 full b)

  More...

   
  What is the format of the film? If it is .avi, you can
  you need to install the Xvid codec.

  This can be checked by using the free software GSpot:

  GSpot Super quick start
  http://www.headbands.com/GSpot/v26x/Quick_Start.html
  (click to the left of the text: GSpot zip file)

  You don't have to install it... just unzip the file and
  GSpot.exe left click to launch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  XviD Codec
  http://www.xvidmovies.com/codec/

  XviD FAQ
  http://www.xvidmovies.com/FAQ/

  Good luck...

• I have UN-plugged my speakers and replaced by headphones. Noise if the headphoens is fine. I now want to put the spekares back in, but there is no sound at all

  original title: SOUND

  I have UN-plugged my speakers and replaced by headphones. Noise if the headphoens is fine. I now want to put the spekares back in, but there is no sound at all. Can anyone help?

  So they are pregnant Dell with standard 3.5 mm USB powered plug (* and even the green port plug in as shown in the picture)?

  Therefore, the USB plugged into the port in the back of the computer for power to the speakers?  Try a different USB port - just to see if the chosen one does not provide the necessary power.

  Make sure that the speakers are turned on and the volume is turned all the top (to the right).

  Make sure that the sound output is not cut on your computer (plug in the headphones to check what you mean by them.

  Plug the 3.5 mm of the speaker to the green port on the computer (see photo above.)

  If you don't hear sound... Unplug the plug 3.5 mm and touch something metal - static electricity?  The speakers become power at all?

• Hi, I have a problem with finding drivers - PCI SOUNDPRO CMI8330 for Windows XP SP2, it is a Pentium1 old computer motherboard, but put up-to-date sound card is integrated... Everyting works well, but there is no sound on speakers? __

  P1 with hardware Ram A - max 128 MB Seagate HD 8, 4 GB memory card mother TXProII
  its an old model but there is no sound... Windows XP Professional...

  Disable the onboard sound from the BIOS and throw them into a basic PCI sound card that comes with the drivers. A basic PCI sound can be had for under $ $20. MS - MVP - Elephant Boy computers - don't panic!

• Installed windows 7 64 bit, but there is no sound driver.

  Original title: Audio drivers:

  installed windows 7 64 bit, but there is no sound driver. Ive been to my card mother website http://www.asus.com/Motherboards/AMD_AM2/M2N32SLI_DeluxeWireless_Edition/

  to get the drivers for my motherboard since my motherboard is used and came with no driver
  ultimately my PC does not claim any audio drivers, ive went into the bios and the same group leader to get sounds and weeks of googeling and research and still no luck and desperately need help to get the sound to my PC

  all your help has been very useful and instructive for the future of the resolution of this problem, but in the end, no audio drivers are compatible because the author of this motherboard is the audio drivers for the version of windows 7. I have audio now because my friend gave me an extra sound card laying around. Thank you to all who tried to help out me :)

• Download my video images, but there is no sound downloading camcorder hard drive into the PC using first Elements 7

  Download my video images, but there is no sound downloading camcorder hard drive with first Elements 7 on a Windows7 PC which has been upgraded to Windows XP

  [transferred to Premiere Elements discussion forum]

• Win 7 shows audio levels, but there is no sound from speakers

  Hi, I went through a lot of troubleshooting why I no longer hear any sound coming from my speakers and I've nailed down for my integrated sound card, I think.

  The problem began when after playing Civ V the game crashed and restarted my system. When he started upward again echi output 'Cannot detect the sound device' speaker symbol was in the status bar. I tried several methods to reinstall the correct audio drivers, but nothing has worked. Then I reformatted my computer in the hope that a fresh boot might fix things. Nothing yet.
  Now, I let windows install all the appropriate drivers and it appears as audio is playing through my speakers/headphones, but there is no really no sound coming out except for a sound of phone type portable interference when is set to max volume.
  So should I buy a new sound card, if it is fried? or have I missed something completely?

  Hello
  My thought is that if you go into your sound settings and the speakers are active display and the meter shows her will... There must be the speakers.
  Now assuming that these are internal speakers and assuming that outs of your headphones and speakers are not the same...
  When you have tried the new sound card, you have disabled the current configuration?
  Let me know
  B Eddie

• I burned the music on a CD RW and when I put it in my CD player, it goes to the 1st track, start counting the seconds, but there is no sound.

  I made a music playlist and saved.  It was not the first time that I did.  I then burned this playlist to a CD RW.  When I put the CD in my CD drive, the display shows the track # and seconds count, but I have NO sound.  What I am doing wrong?

  Thank you.  Bebop_911

  Hello

  (1) windows operating system you are using?

  (2) what music player do you used to save the playlist?

  (3) the playlist saved in what format?

  (4) program which has been burning the CD from?

  (5) you have the sound on the computer?

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Response to us with information required for you help to solve the problem.

• I installed a new sound card and it now says pilot active but not turned on, when you look at the system properties, it is there, but there is no sound at all.

  I installed a new sound card, but it will not play sounds.

  When I look at the properties under system it says driver active but not lit.

  If I try and download the latest driver it says that you have the most updated version.

  When you have a look at the sound properties it shows nothing.

  Hello

  · What is the number and the model of the computer?

  · What is the exact message you read?

  · What service pack is installed on the computer?

  Run this utility from the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02