Wireless connectivity for Dell Dimension L550r

Similar Questions

• Problem with connection usb for Dell Dimension 310 HP 4050

  I have a HP Laserjet 4050.  I bought a Dell dimension 3100 series.  I bought a usb cable to connect the printer.  Since I couldn't find the real on the HP website driver because the printer is interrupted, I downloaded the universal driver what they suggest and plugged into the usb port.  The system says it has recognized the new hardware and I see the doc in the queue, but it prints ever.  Does anyone have any suggestions?  I'm frustrated.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18318&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=6&submit.x=6&lang=en&cc=us

  Above is the link of this universal driver > select the operating system to the link above...

  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475

  I suggest that you contact HP at the above address, or ask their Support Forums:

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Question for Dell Dimension 3000 IDE connector

  Hello

  I'm not sure if this is the right place to post, but please be patient with me. I have a loyal Dell Dimension 3000, 2 GB RAM, P4 processor, 1x250GB HDD burners 2xDVD-R, 1x3.5in floppy drive hard.

  My Question is how to be able to add a second HDD. I have no way to connect to one. The cable I have all what it connects to the current. There is no way with my current cable to connect a second HDD. I don't know what type of connector IDE cable I need or where to buy it, or if there is even an option to one.

  I have the tray and extra HDD ready and waiting but no way to connect. Any help is greatly appreciated.

  John Briggs

  The dimension 3000 will support two hard drives, but you will need support for additional hard drive and one connector three IDE 18 "L, 80-wire cable in water data, which is connected to the primary IDE hard drive and motherboard J6J2 PRI IDE connector, see page 38

  Dimension 3000 second hard drive installation.

  There are no instructions for the installation of a second IDE/EIDE hard drive in dimension 3000, but as the Dimension 4600 has the same case and chassis, you can use the 4600 instructions for the physical installation, see page 18:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  Set the jumpers the second hard drive for "Cable Select" and connect it to the middle connector of the IDE data cable, which is attached to the main hard drive.
   
  After you have installed the reader, enter the setup and make sure the hard drive is set to Auto [on].

  To access the configuration, press the F2 key after a restart of the computer.

  For the details of the system configuration, go to page 34, here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-3000_service%20manual_en-us.PDF

  Use disk management to partition, format, and assign a drive letter on additional hard drive after installation for Windows to recognize the hard drive.

  Bev.

• No internet connection on Dell dimension 300 xp

  Original title: Dell dimension 300 xp

  Just installed the netgear and says I am connected to wifi in our region, but internet Explorer will not appear I missed something

  Hey ajajanine,

  You get the error message after opening Internet Explorer?

  The following articles could come in handy with regard to this issue.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Inspiron 1501 wireless light is not on and I can't get a wireless connection. Dell Inspiron 1501 wireless light is not on and I can't get a wireless connection.

  Dell Inspiron 1501 wireless light is not on and I can't get a wireless connection. I was told that I needed to press the Fn key and F2 but it doesn't change anything

  Catherine,

  To press Fn and F2, you must have installed Dell QuickSet.

  Places to look to see if your connection is activated

  Did you recently install/reinstall the operating system, have you installed the desktop system software / laptop (as appropriate) and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under applications, you can find Dell QuickSet.

  Rick

• Problems with getting a wireless connection for my IPOD touch 32 GB

  Bought an IPOD itouch 32 gb last night.  When I connected the ipod, it is connected to my itunes account and copied my music for me.

  It is also recognized by the name of WI - FI for my wireless account.  Unfortunately, I can't remember or find my password for my wireless connection and so I am unable to connect my wireless to the ipod and establishing the ability to connect to the internet and get my email, etc.

  What is the best course of action for me now.  Should I drop my wireless connection and it restore?  Note: I have a laptop that connects fine, but he asks me a password... it goes directly to the wireless?

  Thank you!

  Go into your router configuration utility and in most cases, you will see the password. If the password is not in clear text, you can change it to something that you will remember. If you do this, you will need to change the settings on the laptop, too.

  To enter the router configuration utility, connect a computer with an ethernet cable. Open a browser such as Firefox or IE and type the IP address of the router in the address bar. For a Linksys router, you must type: 192.168.1.1 [press on enter]. Refer to the manual of your router for more details.

  MS - MVP - Elephant Boy computers - don't panic!

• Processor Intel Core 2 Extreme QX6700 Quad - Core for dell dimension e521?

  I just ordered an Intel Core 2 Extreme QX6700 Quad-Core processor to replace my old amd athlon 64 3200 + for my dell dimension e521 BIOS (version 1.1.4).

  I just want to know if the new processor will work with dell dimension e521 system.

  my PC:

  AMD athlon 64 3200 + 2.00ghz

  6 GB of ram DDR 2

  1 to hidden

  AMD radeon HD 6450

  ...

  Thank you

  Nope.  Intel chips use different chipsets and different the SB of AMD processor sockets.  If your computer is equipped with an AMD processor you must upgrade with an AMD processor.

• controller driver video (VGA Compatible) necessary for Dell Dimension 8250

  As I reinstalled win xp on a Dell Dimension 8250,

  and then found that video controller (VGA Compatible) shows a yellow question mark in Device Manager?

  Anyone would be very kind to provide my a link to download?

  Or show me how to find it?

  Thank you very much

  Hi lksusier,

  As you mentioned that the video driver is not installed in the system, you can go ahead and install the video driver using the link below.

  http://Dell.to/Qnizfs

  Please punch in the system service tag and you can install the video driver, once the driver installed, restart the computer.

  Please do not respond for assistance.

• parts for Dell dimension 9100

  I'm looking for a support of CD drive cd that fit into the drive from the Bay for a dell dimension 9100.

  If someone could send me a link where I could get these that would be great.

  Thank you

  
  

• Drivers of wireless connection for laptop HP G6-1138ee

  I just downloaded a new window of operating system 64-bit on my laptop, but I can't seem to find drivers or software for the wireless connection, wpuld anyhelp much appreciated

  You are the very welcome.

  I think I can get the drivers you need.

  For the 8086, you need the chipset driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  For the 10EC, you need this:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  Paul

• Add the Second controller IDE for Dell Dimension 5000

  We have a Dell Dimension 5000 that has proved to be a very capable workhorse.

  Since buying it we have replaced the DVD burner with a more quick/tough, added an IDE hard drive and added a second SATA hard drive.

  We would now like to add an another DVD burner or another hard drive IDE - anyway we need more IDE connections.

  Can we just add an another IDE controller in one of the free PCI slots?

  Will any make/model or someone at - it recommendations?

  
  

• try to establish a wireless connection for deskjet 7580

  I used HP assistants to uninstall and reinstall the printer software. Then I used a wizard to help the wireless configuration, but at this point, the wizard tells me to use the buttons on the front of my printer. However, the option I gave on my screen of the printer configuration options of the wizard are not think I have. So now I'm stuck. The printer worked fine as a wired printer to my PC, but I was never able to this network.

  I have a Dell with Windows 7 desktop.

  Any ideas?

  Hello and thank you for your update!

  I understand that your printer is currently connected USB, and you have no place to connect an Ethernet cable directly to your router.

  Unfortunately, the printer you have currently, to achieve wireless capabilities, you will need to connect an Ethernet cable to your router. If you look directly on your printer, in the configuration Menu, generally newer models can connect directly to the router (wireless Ethernet) by accessing the wireless configuration wizard. If you had the Wireless Setup Wizard on your printer, you can type your WPA password and the network name of your router.

  In addition, even the full features software will be asked to connect your Ethernet cable to wireless.

  I'll give you a document from HP on install the software of the printer on a wired (Ethernet) network.

  If you have any questions please let me know.

• Scope of the wireless connection for remote access to TimeCapsule

  I use my TimeCapsule as long wireless rather than "create a wireless network, as my ISP does not allow for the time capsule to use as my router.

  I post this question because I would like to access my TimeCapsule remotely and the hard drive connected to it.

  Now I'm Back to Mac enabled on TimeCapsule and what I believe is the appropriate port forwarded port to allow a connection outbound to it, but cannot be accessed remotely to the TimeCapsule. Any ideas?

  

  

  

  

  

  Two problems here:

  (1) the "extend a wireless network" is a defining Apple owner who is only used if the Capsule is wireless extension of the network from another router from Apple. It is not compatible with the wireless to a 3rd party router.

  This parameter must be "create a wireless network" using the same wireless network name and the password of the wireless network FIOS with time Capsule of the FIOS router by a permanent connection, cable connection through an Ethernet cable.

  (2) the time Capsule is configured to act as a router, when it should be configured to act as a "bridge"... Since you already have a FIOS router 'upstream' on the network. If the Capsule is configured as another router on the network, which creates an error Double NAT on the network, and it is unlikely that Back to My Mac would function at all in this type of installation. The setting for the time Capsule router Mode must therefore "Off (Bridge Mode).

  Since the Capsule must be in Bridge Mode to work properly with the FIOS router, it's the FIOS router that must be set up for Port Forwarding. Then, in Bridge Mode time Capsule will cross the FIOS router to your network equipment settings.

• How to get dj2540 of wireless connection for Samsung tab 3

  Hi guys

  I received the assurance that I can connect my tab 3 Samsung with the deskjet2540...

  I tried to find a driver etc. but cannot find the windows/apple connections... I downloaded ePrint...

  Help

  What to do next?

  It is always feasible supermu62, but it can be complicated. If you want to try to get into the built-in settings printers and check for a wireless configuration wizard by using your mobile device, I stated the General information here:
  Using the integrated Web server to connect a wireless printer to your network

  Let me know if you use it, and if it works for you.

• D1100 HP all in one wireless connection for Mac via wire

  Can my hp d1100 connect via cable instead of wireless? I often have problems with wireless. I see a stain on the printer to connect a wire. Tried to use a thread 4200 hp, they show no results.

  HI AGMorrow2,

  Here is a link that will show you how to configure your printer for a USB Wired connection using Mac OS.

  Your printer can certainly do that. Let me know if you have problems with the steps in the document.