controller driver video (VGA Compatible) necessary for Dell Dimension 8250

As I reinstalled win xp on a Dell Dimension 8250,

and then found that video controller (VGA Compatible) shows a yellow question mark in Device Manager?

Anyone would be very kind to provide my a link to download?

Or show me how to find it?

Thank you very much

Hi lksusier,

As you mentioned that the video driver is not installed in the system, you can go ahead and install the video driver using the link below.

http://Dell.to/Qnizfs

Please punch in the system service tag and you can install the video driver, once the driver installed, restart the computer.

Please do not respond for assistance.

Tags: Dell Laptop

Similar Questions

  • Graphic controller driver is not compatible. What should do?

    I want to upgrade Windows XP to Windows 7.  The said Upgrade Advisor my Intel 82865 G Graphics Controller driver is not compatible. I have a Dell 3000 older and uses improved graphics.  I assured the graphic controller driver is more recent.  What should do?

    Saturday, November 3, 2012 20:54 + 0000, CADESgate wrote:

    Thank you.

    You are welcome. Happy to help you.

    I know that a clean install is in order.  I know that all components are compatible unless the graphics controller.  I will consider a replacement of this thanks to Intel.  Any advice on how to start this?

    Not looking for a replacement what anyone (unless the Windows 7
    driver does not exist, in which case you need to buy a new video
    card). As I said, go to the Intel website and find a Windows 7
    Driver for the video card here.

    And once again, leaving aside questions of compatibility, will be your
    machine to be OK to run Windows 7 with sufficient speed. ? How much RAM
    do you have? Have big is your hard drive? What is your CPU?

    Ken Blake, Microsoft MVP

  • Intel USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8

    "" I am currently running windows 7 and was about to upgrade to windows 8, but the upgrade of Windows 8 Wizard says that "Intel® USB 3.0 eXtensible Host Controller Driver is not compatible with Windows 8 '. Is there any solution for this? How to install the drivers USB 3.0 for windows 8? Should I uninstall the drivers before updating?

    Help, please

    I thank in advance

    Hi badesha99.

    I'm glad to know that you've posted on the forums of Windows 8.

    I suggest to uninstall the driver and upgraded to Windows 8.

    USB 3.0 driver Windows 8 has native box, which is automatically installed after upgrade to Windows 8.

    See the mentioned link below for more information.

    http://www.Intel.com/support/chipsets/USB3/sb/CS-033870.htm

    Hope the above information helps and let us know the question in your next post.

  • Need video driver Windows 8.1 Overview for Dell Optiplex 780

    Hello

    I installed windows copy 9431 build Preview Pro Windows 8.1 evaluation (64-bit). I tried all video drivers http://www.dell.com/support/drivers/us/en/04/Product/optiplex-780 for Windows 7 64-bit.

    But no driver is compatible with my windows. Single driver installed successfully named "VideoOPGA6_XP_A00_setup - R3M7Y_ZPE.exe", but does not properly. Can U please give me the link of good pilot?

    Problem is only with the video driver.

    My whole PC details:

    Processor: Intel Core 2 Duo E8400 @ 3 GHz 2.99 .00GHz

    Hadrdrive: 640 GB Seagate

    RAM: 12 GB (4 GB x 3) DDR3

    I am waiting for your kind reply.

    Best regards

    Danish Muhammad

    Hi Muhammad Danish,

    Windows 8 compatible drivers for OptiPlex 780 are not available on the Dell support Web site.

    Have you tried to check for drivers on the video card manufacturer's website? Based on the file name of drivers you mentioned, I think that your computer is the AMD Radeon HD 3470 graphics card.

    Try to install more software Catalyst from the following link: http://dell.to/16zWqy5

    Do not answer with the results.

  • 2 TB hard drive for Dell Dimension 9200

    I have a 3 years Dimension 9200 desktop with 2 X 160 GB hard drives configured as a RAID 320 array.  I want to move to a single 2 TB hard and I was wondering if someone could advise me if a Seagate Barracuda XT ST32000641AS - buffer of disk hard - 2 to - internal - 3.5 "-SATA-600 - 7200 rpm -: 64 MB would do the job."  Otherwise, what is that limit the upgrade?  Is there more to consider otherwise if it is a SATA hard drive? Someone at - it other recommendations? My apologies if this message sounds like it is a novice to updates - the reason is that I am!

    There is no reason from a material point of view that a 2 TB drive would be a problem in the Dimension 9200.  Just considerations common to install a SATA drive.

    You install Windows XP?  If you use the installation disc is a labeled Dell installation disk, SATA drivers can be already integrated in the drive.  Most Windows XP installation diskettes, however, won't these drivers so that the computer hangs during installation, typically have reported that a hard disk cannot be found.  If you find that this is the case, go to the system configuration (F2 during the self-test after starting or restarting the computer), then assign the controller SATA RAID Autodetect / ATA.  This parameter allows to use the native IDE drivers on the Windows XP installation disc.

    If you use Vista, you should have no problem Vista installation media should have native SATA drivers.

    Manuals for your computer are available at support.Dell.com.  The service is currently not available, but should be back before long.

  • Need Compatible printer for Dell Inspiron 560

    I wonder if someone can help me please, I tried to work backwards (from my ink) to find a printer for my office with no luck and am at my wits end. I got a HP PSC (printer/scanner/copier) when I got my HP desktop computer, but then I upgraded to my current Dell a few years before and never hang upward my printer I have he didn't need right now. Time passed, and I tried to print, but got an error saying that it has not been installed; I remembered that I never installed on this Dell PC when I unpacked & set up. I soon discovered that it was "not compatible" and of course, that was after (it appears) I had just bought new ink for the printer, so now he is sitting with the new ink (already open so cannot return) and unable to connect to my Dell. I looked everywhere for updates or driver updates etc, but no luck & finally HP told me that there is no way that they are compatible. He uses ink (black & tricolor) #21 & #22 cartridges so now I'm trying to find a printer that is not only compatible with my Dell but that also uses the full/new ink cartridges I have. I'd appreciate any help someone can offer, I can't afford to just buy a new printer on the site for those who work are fine, I just need to get an idea of who will work so then I know what I can get. Thank you!

    I had the impression of working with a driver/support/upgrade download updated os, thank you for your answers.

  • Add the Second controller IDE for Dell Dimension 5000

    We have a Dell Dimension 5000 that has proved to be a very capable workhorse.

    Since buying it we have replaced the DVD burner with a more quick/tough, added an IDE hard drive and added a second SATA hard drive.

    We would now like to add an another DVD burner or another hard drive IDE - anyway we need more IDE connections.

    Can we just add an another IDE controller in one of the free PCI slots?

    Will any make/model or someone at - it recommendations?


  • controller driver simple communication Missing pci for windows 7

    Upgraded my PC to Windows 7 Ultimate. HP Compaq dc7700.

    Missing PCI Simple Communications controller driver.

    Hello:

    This is probably...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 3232028 & prodNameId = 3232101 & swEnvOID = 2103 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ir-46941-1

    If not, then try this...

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-87672-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 3232028

    Paul

  • parts for Dell dimension 9100

    I'm looking for a support of CD drive cd that fit into the drive from the Bay for a dell dimension 9100.

    If someone could send me a link where I could get these that would be great.

    Thank you


  • Question for Dell Dimension 3000 IDE connector

    Hello

    I'm not sure if this is the right place to post, but please be patient with me. I have a loyal Dell Dimension 3000, 2 GB RAM, P4 processor, 1x250GB HDD burners 2xDVD-R, 1x3.5in floppy drive hard.

    My Question is how to be able to add a second HDD. I have no way to connect to one. The cable I have all what it connects to the current. There is no way with my current cable to connect a second HDD. I don't know what type of connector IDE cable I need or where to buy it, or if there is even an option to one.

    I have the tray and extra HDD ready and waiting but no way to connect. Any help is greatly appreciated.

    John Briggs

    The dimension 3000 will support two hard drives, but you will need support for additional hard drive and one connector three IDE 18 "L, 80-wire cable in water data, which is connected to the primary IDE hard drive and motherboard J6J2 PRI IDE connector, see page 38

    Dimension 3000 second hard drive installation.

    There are no instructions for the installation of a second IDE/EIDE hard drive in dimension 3000, but as the Dimension 4600 has the same case and chassis, you can use the 4600 instructions for the physical installation, see page 18:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

    Set the jumpers the second hard drive for "Cable Select" and connect it to the middle connector of the IDE data cable, which is attached to the main hard drive.
     
    After you have installed the reader, enter the setup and make sure the hard drive is set to Auto [on].

    To access the configuration, press the F2 key after a restart of the computer.

    For the details of the system configuration, go to page 34, here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-3000_service%20manual_en-us.PDF

    Use disk management to partition, format, and assign a drive letter on additional hard drive after installation for Windows to recognize the hard drive.

    Bev.

  • Problem with connection usb for Dell Dimension 310 HP 4050

    I have a HP Laserjet 4050.  I bought a Dell dimension 3100 series.  I bought a usb cable to connect the printer.  Since I couldn't find the real on the HP website driver because the printer is interrupted, I downloaded the universal driver what they suggest and plugged into the usb port.  The system says it has recognized the new hardware and I see the doc in the queue, but it prints ever.  Does anyone have any suggestions?  I'm frustrated.

    http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=18318&TaskID=135&prodTypeId=18972&prodSeriesId=25475&submit.y=6&submit.x=6&lang=en&cc=us

    Above is the link of this universal driver > select the operating system to the link above...

    http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475

    I suggest that you contact HP at the above address, or ask their Support Forums:

    http://h30434.www3.HP.com/

    HP's Support Forums at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Processor Intel Core 2 Extreme QX6700 Quad - Core for dell dimension e521?

    I just ordered an Intel Core 2 Extreme QX6700 Quad-Core processor to replace my old amd athlon 64 3200 + for my dell dimension e521 BIOS (version 1.1.4).

    I just want to know if the new processor will work with dell dimension e521 system.

    my PC:

    AMD athlon 64 3200 + 2.00ghz

    6 GB of ram DDR 2

    1 to hidden

    AMD radeon HD 6450

    ...

    Thank you

    Nope.  Intel chips use different chipsets and different the SB of AMD processor sockets.  If your computer is equipped with an AMD processor you must upgrade with an AMD processor.

  • Pavilion p6 - 2127c: video card Compatible hdmi for Pavilion p6 - 2127c

    I have a Pavilion p6 - 2127c in my conference room, desktop computer connected to a TV 50 "flat on the wall. I would like to connect using an HDMI cable, but there is no HDMI port. What type of video card should I buy that is compatible with the office and for the videos and presentations (no game)? Thank you in advance for your help!

    Cmann225, welcome to the forum.

    Here is a video card that should work with your computer.  However, you should check ASUS website to find out what power supply unit (PSU) is necessary.  It indicates that 75W is required, but it is the power supplied by the PCI Express x 16 slot.  This means that there is no need an additional power connector.  The power supply of the computer is 300W.  Also, check to make sure that the card does not require UEFI in the motherboard instead of a standard BIOS with ASUS.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • driver video vga compatitable - needs an update

    video driver not in the list of hardware, you update the drivers from whedre. Click on a photo, but not therfe.  help, I am tiredx to ask for help and either find or get an answer. Kat nash

    Start > run > type dxdiag > press the Enter key.

    Click the display tab to find out what graphics card is here.

  • Sounds strange glitch when you watch videos, listen to music for Dell Inspiron 1545

    I don't know how else to describe what is happening except when I watch videos and listen to music, this glitch or buzzing sounds sound approximately every 10 seconds or more. I have done everything I know, search for possible viruses, reinstall the software. I'm not a geek, I use my Inspiron 1545 laptop for school, music and web, I do not so anything that's difficult. Everything works fine except this problem.

    Thanks for your help.

    shalvshah
    restore the system to an older date has apparently solved the problem.

    If she comes back, check the list of programs in the control panel > programs & features and remove Dell Support help and Dell Support Agent to it. Dell published a bad update last week that causes ringing. If you have this update, perhaps using the removed system restore.

Maybe you are looking for

  • Disk cache does not

    I use the add-on for the status of the Cache and noticed last week that the disk cache half of it shows 'not yet loaded. At first I thought that the problem was with the add-on, I even uninstalled and re-installed, but still got the same message. The

  • Do not feed paper for incoming faxes, officejet pro 8600 premium

    I have a HP Officejet Pro 8600 Premium.  Recently I started having a problem with my incoming faxes.  An incoming fax comes through, and when it will feed the paper to print, it shows on the screen that it is paper.  He goes through the process of tr

  • Slide with several digital poster Down filter event Bug button?

    A key event filter on a slide with several digital screens down does not work as expected when not waived. If you for example tab of this slide with two digital screens digital display, the cursor remains on his position, rather than get KeyFocus to

  • Reading of fluctuation thermocouple k type

    I'm new to Labview please anyone can help would be appreciated. I'm trying to read the temperature using thermocouple type K with a NI 9213 module in Labview. I used two individual channels.  One is the ambient air temperature. The second is one is i

  • HP1020 won't print on Windows 7 without a showdown and start the spooler

    Windows 7 Enterprise 64-bit.  Printer USB HP 1020 installed locally and shared by a working group.  I send any documents to the printer locally and across the network and the only way to get the document to print is to go to Services, stop the spoole