Wireless game controllers?

Similar Questions

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• DV7-6b75nr: sound, video and game controllers

  Hi guys... not been here for a long time.

  In "Device Manager", under sound, video and game controllers, the "Bluetooth Audio" has the formidable yellow triangle, and when I opened the unit, under status it says... "Windows cannot verify the digital signature required, etc., etc. (code 52).

  I tried to reinstall HP Recovery Manager, but may does not seem to solve the problem. The driver provider says it is Intel Corp., and of course somewhere in the order of things, I damaged the drivers. When I go to the Web page for the laptop that I seem to be unable to find the correct drivers that I need! My Bluetooth mouse works fine.

  I tried the "Intel PROSet pilot Bluetooth" that did not help.

  If someone could point me in the right direction... Any help would be appreciated

  Waiting... Thank you

  Yes, I give than to try and also uninstalling driver box.

• I have no sound in windows vista and when I try to not go to device, sound Manager, video tab and to develop to this end game controllers cannot tell if I have a driver. Any help?

  I read on how to fix sound on windows vista, but each of them includes opening sounds and video game controllers in Device Manager. But I did that tav.

  Open Device Manager, click the view menu, click Show hidden devices

  To view nonpresent devices in the Device Manager follow the steps below.

  Control Panel, system, System avancΘs, Environment Variables

  Under system variables, click New,

  For the name of the Variable: type: devmgr_show_nonpresent_devices

  For the value of the Variable: type: 1

  Click OK, OK, apply, OK

  Go back to Device Manager, click on view devices, then click on the + to expand the group if not.

• Audio, video, and game controllers missing in vista 64

  Hey there,

  I'm having a problem with my card mother dx58so and sound.  The speaker beside clock icon has a red X.  He says that there is no audio output device installed. When I go into Device Manager it isis is not even an option to extend a audio, video and game controllers. It is completely absent.  I've updated to a vista 64 SP2.  I also tried to install the drivers from microsoft, intel realtek and realtek themselves.  I called intel and had them go through everything with me also including enable/disable in the bios, updaste chipset, bios, drivers.  They also had me uninstall the driver that is at this time the audio, video and game controllers disappeared.  Any help would be great, otherwise I'll probabley try to reformatt HDD and reinstall windows.

  Hello zusa313,

  Thank you for using Microsoft Vista answers Forum!

  We would like to get a better understanding of this issue so that we can better help you on this question.

  Both your video and sound on Board (part of the motherboard) cards or are they another card installed in one of the slots on your system (stand-alone)

  Which version of the service Park you have on your PC (SP1 or SP2?)

  Have you checked to make sure that this motherboard is compatible with the operating system you are using? You can check it out here CENTER OF COMPATIBILITY of VISTA

  If your device is compatible, your problem may be getting the right driver or a defective unit, or you need to just run all the necessary update on your PC.  I suggest you run Windows update to get the latest updates for your PC.

  Second, boot your PC in a boot environment in MINIMAL MODE to make this issue is not caused by a background program and reinstall the latest drivers for your devices

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on Start, type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7. after the computer starts, check if the problem is resolved.

  If your problem is resolved, follow the section How to determine what is causing the problem in the KB article to narrow down the exact source.

  http://support.microsoft.com/kb/331796. In addition, refer to the section on how to restore your computer to a Normal startup mode

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• wireless game access

  I have a 2wire wireless game adapter that uses the ethernet connection. How I set it up to work with my router for a ps2?

  Problem solved. Thank you.

• Gamepad listed in "Devices", but NOT in the game 'controllers '.

  I am trying to install an old joystick Saitek USB X 36.  After hanging, it is listed as a "HID-compliant game controller" under the heading devices "devices and printers".  However, when I go to the "Game controllers" window, there are has no devices listed.  By clicking on "Advanced" button me give it a choice of 'none' or 'none '.

  Is it possible to force Win 7 to recognize the device in both places?

  Thanks in advance.

  -mike

  Hi Mike,.

  I'm sorry for the late reply.

  Since the joystick Saitek USB X 36 worked fine with Windows XP, there is a problem with 36 joystick Saitek X USB drivers. I suggest to try the joystick Saitek X 36 USB in Windows 7 different machine and check if it works very well. You can also install the drivers for USB Saitek X 36 joystick in compatibility mode for Windows XP and check.

  See the steps to install a driver in compatibility mode:

  a. right click on the driver file and select Properties

  b. Select the Compatibility tab

  c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list

  d. let the driver to install, and then check the functionality.

  Let us know the status of the issue.

• Version of the software Cisco Wireless LAN controllers & Licensing (controllers HA and APs Adder & licenses basic questions)

  In fact, one of my clients has two Cisco 5508 wireless LAN controllers installed in a site and back up and running now. one of them running software version 7.4 and the other running software version 7.6. Each of them works as a stand-alone controller with number of access points. Based on this scenario, answer below concerns:

  • Can we transfer all active licenses at one of them and use it as a HA free of charge?

  • Up to which version of the software, we can improve these controllers without any extra charge?

  • What we must do if we want to move two of them to version 8 software?

  Waiting to hear from you soon about my concerns.

  Here are a few notes:

  -Only licenses Adder can be reheberges to another controller. Base license cannot be rehosted unless the unit is THAT RMA would be.

  -Too long the WLC has a minimum of 50 access point license, so that the unit can be used for HA N + 1 or AP SSO.

  s ' it use SSO of AP, the WLC must have connections to subnets for layer 2 even due to the IP address of the interface.

  HA N + 1 can be used in sites different especially if the subnet do not align

  -Scott

• WGA54G wireless game adapter

  I was going to send Linsys but can't see anything on the site here.  In any case, I use a WRT58 router with the adapter to play as a bridge wireless, especially for a receiver, but she also used for a blu - ray player and a digital recorder.  Since it has only one port, I decided to go for a multiport bridge.  I have a router D-link Bridge and the D-Link.  Should have stuck with Linksys.

  After no luck with the router and bridge, I reinstalled my Linksys components.  Things work very well except that, even if the bridge shows connected to internet and wireless g, none of my devices regonize it.  I did a factory reset and went through the installation procedure.  I rebotted everthing but still no luck.  The web page displays the device connected to my network a Roku player with his ' on the wireless adapter to connect to the internet without any problem.  Any ideas?  Thank you.  Stan

  Good to know that you were able to solve your problem by yourself.

• 360 WRT54G wireless game adapter and xbox

  First post here and I have a problem. The WRT54G has disabled wirlelss. It is connected to a WAP11B wireless access point that is connected in 802. 11B mode for a laptop, Wii, xbox 360, iPhone. The router is connected to a dsl modem. Three wired ethernet computers are connected. I am running WEP with 128, and I changed the SSID to something other than linksys.

  I would like to change to use the WRT54G as a Wi - Fi enabled connection. Then remove the WAP11B and put a PCMCIA 802.11 g in the laptop and connect the xbox360 with a microsoft xbox 360 Wireless gaming adapter should connect to 802.11 g.

  The problem is that the xbox 360 displays a message indicating that there are duplicate using my SSID networks. Y at - it a upgrade to 802.11 g without getting this error on the xbox 360? Let me know if you have any questions I can answer to explain the problem more clearly.

  Thank you

  Jordan

  Have you tried changing the SSID... If it isn't changing the SSID of the network, and try...

• Games controllers and joysticks not detected by Windows 7 64 bit

  Hi all

  Ive just built a new comptuter running windows 7 Home premium 64-bit. When I plug a joystick game windows 7 does not recognize I have nothing plugged even. Mouse and keyboard work fine in usb ports.

  How can I solve this problem?

  System specs

  XFX Nforce 750i SLI motherboard
  Intel quad core q8200
  4 GB of OCZ SLI READY memory
  NVidia Geforce gts 250
  WD 320 GB HARD drive
  Xion 2 cases

  Hi averlinden11,

  We would like to know the brand and model of the joystick and game controller.

  1. check if the game controller is compatible with the version of the operating system installed on your computer.

  You can check the link below for compatibility:

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

  2. make sure that you have installed the software on the game controller.

  3. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

  4. you can run the fix it tool from the link below: hardware devices not detected or does not:

  http://support.Microsoft.com/GP/hardware_device_problems

  Link for reference: Tips for solving common problems of pilot: http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-driver-problems

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Alienware X 51 R2, Windows 7 Pro 64 bit: sound, video and game controllers [issue]

  The current issue is manifested when a game is running and freezes (hangs).  I was able to uninstall the associated drive, reinstall and find a partial stability.

  However, the HD audio driver refuses to maintain a viable configuration.  At this point, I have used the remedies of driver Support from Dell, in the order of installation, and remains alert to the HD audio driver.

  Other questions:

  • The experience of GeForce, Fallout 4 configuration, after clicking PLAY, screen freezes.
  • Fallout 4 using shortcut, after clicking PLAY, the screen freezes.
  • Game of Fallout 4 folder using EXE, selection of low resolution, screen freezes.

  (See attachment)

  

  Comments?  Suggestions?

  You will probably get a better response if you re - post it in the forum of the Club of Alienware .

• Microsoft sideWinder force feedback 2 game controllers driver for Windows 8

  Original title: Joystick Microsoft SideWinder Force Feedback 2 8 victory Flight

  I have recently upgraded to windows 8 and now need drivers for my MS sidewinder force joystick feedback 2 use my FSX flight sim. Anyone know where to find the drivers?

  I recently bought Microsoft Flight Sim X on stream. I've performed under a victory 8.1 HP laptop. I am lucky to have a Microsoft sidewinder force joystick feedback 2 which was a purchase of second hand many years ago.

  When I connect it via USB the software automatically recognized and installed the driver suitable for the start and reports in devices like a sidewinder Force Feedback 2 joystick.

  Initially using the properties and the calibration does not register any input the joystick game, but as the result of a reboot or run the program MS Flight Sim X everything works perfectly.

  Calibration running confirms all the buttons and wheel and look at a hat all them light up and work 100%!

  For reference, I am on windows 8.1 and have the auto update on.

  So in summary, you should find that you need not track down the drivers and plug and play works, simply because of my experience.

  Happy flying!

  D. Sandison

• Multiple MAME of XP/game controllers.

  Okay, so I worked with MAME. I have a gamepad that works very well. However, when I connect a joystick, things turn to the sour.

  Specifically, I want my Logitech Attack 3 Player 1, and my FuSa gamepad (PSP + app that turns into a joystick, just like any other) be player two. However, as soon as I connect FuSa, it turns into joy 1-MAME and my joystick is kicked of joy 2. JoyIDs does not work, and I don't want to remap because my PSP will only be connected when someone plays, so my joystick goes back to Joy 1. I know other people online I have this problem, there is no right answer.

  I have more unusual problems. Just google my questions. Valid only result this page.

  have you tried to configure gamepads in the WORLD?

  TAB / GLOBAL

  also...

  try deleting the MAMEUI32.ini or whatever the ini is maybe (you run MAME in BACK).

  then run MAME and restore everything back to the default value (which should be done anyway after deleting the ini, but just for the _ of it).

  I had a problem where a joystick no longer works once and it fixed it.

  post back.

  MOS