Wireless is on but shows as if it is not
I am running windows Vista why has my wireless suddenly stop working? I put my computer to sleep and when I came back and tried to use the wireless did not work.
How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Syed
Answers from Microsoft supports the engineer.
Tags: Windows
Similar Questions
-
I have a Dell Inspiron 6000 laptop and I use a router D - Link DIR-615 and a Wireless N adapter, but when I checked my settings, I received only a G signal. What can I do to get a N signal?
* original title - how will I know if my cell phone is compatible? *
The chipset WiFi the only information that I could source on the Inspiron 6000 ranked either the Dell Wireless 1390 802. 11b / g card mini or Intel Pro/Wireless 2100 802. 11 b / g mini card.
None of them is compatible with N.
-
"Unidentified network".
Hello, today I tried to connect to my friends wifi with my laptop, including wireless I use it for a month now and its impossible! Down right it shows only 2 blue screens without the World Cup, and he said "unidentified network"! I tried several solutions, I found online as 'install the protocols Internet 4 and 6', make sure that I have the ip auto get same restore point system and safe mode with network! Nothing works... my friend connects with his laptop and I can connect with my smartphone, except my laptop! I have windows vista... Please help me thanksGo to: Control Panel, Manager of Devic, adapters to extend your network, click with the right button on your wireless network and click on uninstall.
Do not put a check in the box: remove the software driver for this device.
Restart your computer and Windows will install your wireless network.
If the problem persists, see if your computer manufacturer has an updated driver.
These articles may help:
-
I can't save. Advance registration line but shows only a few peaks.
I can't save. Advance registration line but shows only a few peaks.
Hello
1 did you do any change on the computer before this problem?
2. which version of the Windows operating system is installed on your computer?If you are using Windows Vista I suggest you to consult the following Microsoft article.
Troubleshoot audio recording : http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-audio-recording-problems
If you are using Windows 7 I suggest you to consult the following Microsoft article
Open the troubleshooting of Audio recording open the troubleshooting of audio :http://windows.microsoft.com/en-US/windows7/Open-the-Recording-Audio-troubleshooterAlso see the following Microsoft article:
Record audio with Sound Recorder: http://windows.microsoft.com/en-US/windows7/Record-audio-with-Sound-Recorder
Audio recording in sound recorder: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Recording-audio-in-Sound-Recorder-frequently-asked-questions
Record sound: http://windows.microsoft.com/en-US/windows-vista/Record-sound
-
I am connected but the network properties window does not show the size of the packets to all the
I am connected but the network properties window does not show the size of the packets to all the
Hi asaimas,
You can follow this link & check if it helps:
Configure the Option of configuring server network packet size
Hope the helps of information.
-
mifi4510L
Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.THXHello
I suggest you to try the steps below and check if it helps.
Method 1: Try running the Fixit tool from the link below.
Hardware devices do not work or are not detected in Windows:
http://support.Microsoft.com/GP/hardware_device_problemsMethod 2: Try also to update the latest drivers for your device wireless using the link below.
How to manage devices in Windows XP:
http://support.Microsoft.com/kb/283658
Hope this information is useful.
-
My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .
original title: status: network address acquisitionHi BKlap,Try these methods in the order.Method 1: Repair the network connection to solve the problem.For more information, see:Note: The information in the article applies to Windows XP Home Edition as well.Method 2: Follow the steps listed in this article to resolve the problem: -
I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network. I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com. I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?
Hello
You can try a system restore...
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
.. .choose time, until this problem (you may tick to show more older restore points).
Tricky
-
I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online. What can I do?
Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...
-
I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!
original title: Internet connectivity problemHello
Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.
Support link: http://www.pandasecurity.com/homeusers/support/
-
I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.
I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.
I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?
While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?
The driver installed is the 'last' to 5.60.48.35.
I tried to restart the router and the computer without success. I use Windows Firewall.
No bright sparks that can point me in the right direction?
Thank you
Declan
Hello
Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Windows media player will show it's extraction and burning, but then the burned cd does not play? Used to work properly, then a few days ago decided not to make a playable copy.
Your setting got changed if you don't burn it as audio. This is the setting you need to change...
Click the dropdown arrow in the "burn" pane and select "audio disc" and you should be ok again. R
(You will need to start over with a fresh blank disc).
-
WiFi CONNECTED but showing YELLOW ASTERISK in the taskbar
My Wifi works fine with access point and connected, but the problem is in the bottom right of the network notification task bar it's to show that it is not connected with asterisk yellow (as a standard asterisk should show that when Wifi is not connected).
I really appreciate your opinion and suggestions as possible.
Thank you.
In my case, the problem was apparently last updated from windows.
I changed parameter "Service.msc" in "Windows Update" from automatic to manual and restarted my laptop.
Since then, it works fine.
-
(HP 4580) does not print what items. It will be printed "(scan and copy) and wireless test report, but I we USB connection to"
My Compaq Presario CQ 60-41OUS Notebook PC. Just reinstalled the printer pogram/driver. He hhas worked OK for 2 years.
Al to * address email is removed from the privacy *
And the answer to your message of 15 does not solve the problem?
-
Wireless networking works, but cable dose not
My NAT type has been closed and I opened my router page to see if the ports are open, they were not, but the fact is that I've wound up with making a single change to routers setting but now my wired connection does not work but my dose wireless. I have reset the router, the modem, does a system restored, reset the switch and no change. Internet pages just load and load and never expire while my wireless works fine, I do that through my phone, so I'll try to give you this info I can but if I have to type all of this will take a while.
Windows 7 32 bitTime of modem Warrener (brand name not sorry)Linksys e1000 routerAnd switch ezxs55wLet me know what information you need.Hello
Do you receive an error message or error code?
Try the following and see if it helps.
Method 1:Run the Windows 7 network troubleshooting. http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:In the Windows wireless network connection problems:
http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab04Problems in Windows wireless and wired network connection:http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows
Maybe you are looking for
-
EDIT - I went CONTACTS and added my work address on my map. For some reason any who has activated the two buttons. Well maybe this will help someone else. Updated my Apple Watch OS 2.2. On the MAPS, there is a home button and a button to work. When
-
Portege 7220 and windows 98. Black screen installation
Hello I am facing this problem when I try to install win98 on the machine above Portege 7220 (/ PIII650/64/12/13 t/M), following on its docking station... I boot from a floppy disk and cd rom (e:\) access in order to run the installer of windows 98SE
-
I just removed a virus on my computer and now I am unable to connect to cable networks.
I just removed some pirate virus from my computer and now I can't connect to my wired network (comcast) longer. I click on repair the connection and the error "failed to query TCP/IP settings on this connection. System will not draw an address. Any h
-
computer does not recognize my external hard drive, how to fix
my computer does not recognize my external hard drive and need to know how to fix it. I need to access files on the hard drive. AS SOON AS POSSIBLE
-
With bitcomet Internet connection error
BitComet download correctly. It again me, I am having inter Explorer connection error. pretty much your standard internet explore cannot display the Web page. What can I do to fix this?