Wireless network disconnects and then take the time to connect again
Hello
We have a wireless network, composed of 23 WAP (1700) and WLC 2504. We have three SSID, 2 in vlan 120 and the third in the vlan 121.
The network takes time to connect to any SSID, and after three or four attempts, it connects and some time connected to less range and a few times at all, even if we are under the WAP.
Can someone please help me on this, as I am new on wireless and my main area of activity is R & S, SP and DC.
Any help or the index will be very appreciated.
Thank you.
Kind regards
Adnan
I see no error with config.
What version you use WLC?
Are there any specific client having problems connection or all devices?
Concerning
Remember messages useful rates
Tags: Cisco Wireless
Similar Questions
-
How can I configure TB so that the message pane is disabled.
using CCLeaner? See http://thunderbirdtweaks.blogspot.com.au/2012/06/thunderbird-and-ccleaner-or-my-settings.html
-
Take the time to navigate from one field to another field or record to another record.
Hi all
We are facing a problem in our forms, when navigate us from one field to another field or move a recording to below the record in the block of retail then it takes 4 to 5 seconds to navigate.
It's unusual behavior, sometimes it works very well and long takes the time to browse.
Here's our environment:
Server configuration:
Oracle Fusion Middleware 11g (10.3.6)
Oracle 11 g Release2 forms and reports services
Oracle Database 11g Release2
Client side:
Browser = Internet Explorer (8.0.6)
Java 7 update 45 (build 1.7.0_45 - b18)
Kind regards
Omer
Questions about the customer like this are typically Java associate. Have you tried to clear the Java Cache on the affected workstations?
Craig...
-
You know a software product to insert text in the photo and then take pictures of Windows and copy on an external USB to print at the pharmacy. Thank you
To achieve this product is Adobe Photoshop http://www.adobe.com/products/photoshop/family/. This not only allows you to do, but allows you to manipulate pictures in almost any way you choose above all.
If you are looking for a less expensive solution (although nowhere near as functional), then Microsoft Photo Editor free http://www.brothersoft.com/downloads/microsoft-photo-editor.html will probably do the job for you. In addition, you can try the free Microsoft Office Picture Manager 2003 to http://www.brothersoft.com/microsoft-office-picture-manager-171868.html. I suggest that you try the free options to determine if it meets your needs before you spend money on Adobe Photoshop (as good as Photoshop is).
All these programs have the ability to record in a variety of formats - certainly, including that which can be handled by your local drug store (call them to check to determine what types of extensions that they can support and don't forget to use this format when you are working with your photos).
Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.
-
AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING
AFTER TWO MINUTES OF INACTIVITY, I AM BACK TO WHERE I LOG IN AS A USER AND ENTER MY PASSWORD AND THEN TAKES ME TO ANY PAGE OF THE APP I WAS USING
Hello
Click on desktop and select Customize.
Click the screen saver icon on the bottom of the window.
In the window of the screensaver, remove the check mark from the résumé shows the lock screen.
Click Apply/OK.
Explanation:
Even if a screen saver is not enabled if you select the summary option, the system will automatically display the lock screen when the idle time is reached.
Concerning
-
I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the business of the connection, and then exit the application, the remote Mac began a disconnection. He also started doing this when I connect from my first Mac via screen sharing. It is a relatively recent behavior. Someone has an idea what setting I have (inadvertently) enabled to prevent the computer from automatically disconnect when the 'access app' is no longer active on the remote device?
Go to System Preferences > energy saving > computer sleep > drag it FOREVER to prevent disconnection of your mac.
Think simple.
-
I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it
Try:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.
I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access
added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?
Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam
Visit this link:
http://support.Microsoft.com/kb/936213 -
Original title: need help with wordpad problem
When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?
Hello
· What happens if you use another application to preview before printing?
· You are able to print the document correctly, or you receive no error message when printing?
You try to use Microsoft Word or Notepad to check if you face the same problem.
First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.
If Yes, then the problem is the document.
You may need to clear any formatting, that depends on where you copied from.
Your rule of printer drivers print preview
-
Hello! I want to take advantage of the Black Friday for student agreement. However, I already have a plan that ends in a few months. Can I cancel this plan and then use the agreement of Black Friday? Thank you!
Hello
You will need to speak with sales of Adobe for the same thing.
Kind regards
Sheena
-
update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?
Perhaps a preferences Reset could fix. Cmd k will lead you to the Photoshop preferences where you will see this screen.
-
Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?
Rayo
Thanks for the reply.
Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.
Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.
Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next
If necessary.
If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.
Thank you.
RTA
-
Wait for the host disconnects and then run a command
Hello world
I have a stop script for my virtual infrastructure, now I have to add code to stop an Equallogic AFTER the last host table is turned off.
I know the commands to do this, but I need help to write a loop that will test the ip address of the last host management and wait until this station responds to pings.
In my script I have to establish what host will be put off to the end so it's not a problem... How can I keep ping IP management host to die and then run the commands Equallogic?
I hope that I managed to explain to me... I was exploring the Test-Connection cmdlet but it seems that it displays che echo of the ping instead of State... I'm a bit lost around this, can someone help me please?
Something like that would do the trick?
$count = 0
$maxWait = 10
{}
$count += 1
Write-Output "$(get-date-f HH) $(get-date-f JJ/MM/AAAA)-host is offline."
sleep 5
} until (!) (Test-Connection 192.168.110.85 - BufferSize) count 16-1 - calm)- or ($count - gt $maxWait))
If {($count - gt $maxWait)
Write-Output "Host always online."
}
else {}
Write-Output "$(get-date-f HH) $(get-date-f JJ/MM/AAAA)-host is offline."
}
-
Wanted M6-AE151DX: wireless network disconnecting after rest
I lose my connection Wireless to my home network if my PC is idle for a period of time. I have to disconnect and then back to the network access. No idea what is the cause and how to fix?
Hello
Please try the following steps
b click Start,
b click on Device Manager,
(c) develop the network adapters,
d right clisk wireless adapter and select Properties.
(e) go to the power management tab.
(f) uncheck the box "allow the computer to turn off...". »
(g) click Ok/apply
Kind regards.
-
Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.
Original title: used to install Windows 7
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticAlso check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.htmlJ W Stuart: http://www.pagestart.com
Maybe you are looking for
-
New Macbook 12 inches - swollen battery
Hello world I bought the new MacBook for my father in June 15. He started to use end of August and loved it instantly. Two weeks ago the rear housing began to separate and I took today at the apple store and they said its probably a swollen battery.
-
Install the DMS - 5.2.0.25 in UCS-C24-M3
Hi all I can install DMS - 5.2.0.25 in UCS-C24-M3? because, after that I have insert the CD and start. I got a warning message. "the unknown detected system. Thanks for your help.
-
Hello Is it possible to have the ACS software to authenticate to the external DB for users admin level administering the area... Thank you, AJ
-
Drive hard Canon VIXIA HG10 camcorder 10 x
No driver available for Canon VIXIA HG10 10 x drive hard camcorder on two versions of Windows 7 (32-bit or 64-bit).
-
I tried to open my Photoshop program tonight, but it does not open... nothing happens. CC programs seem to work ok. Any suggestions?