Wireless not working not not after installing the new windows 7

Similar Questions

• installed the new windows Friday and since my computer is very slow and not connecting to internet properly

  installed the new windows Friday and since my computer is very slow and not connecting to the internet correctly... anyone else having these issues?

  System Restore to go back before the show.

  I suggest you to install the updates one by one and reboot the computer after installing each update to verify that update is causing the problem.

  Also note the updates that you install on the computer.

  Once you come to know what update is causing the problem, let us know.

  Do not install any driver updates offered by Windows Update. Find them in the manufacturer's website instead.

  Try a convenience store

  Windows includes two programs of troubleshooting that you can use to automatically fix some common problems with performance on your computer or to the maintenance of your system.

  Open the Performance troubleshooting utility by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click check for performance issues.

  Open the of System Maintenance Troubleshooter by clicking the Start button, then Control Panel.

  In the search box, type Troubleshooting, and then click Troubleshooting.

  Under system and security, click run maintenance tasks.

  08/14 / 1115:46: 45 pm UTC

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

  I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Error 0X0000007E Stop after installing the new card mother and CPU.

  Original title: Stop error after installing the new card mother and CPU.

  After I installed a new motherboard and CPU I got a stop error 0X0000007E (0XC0000005, 0XB77EA756, 0XB84C742C, 0xB84C7128) and it restarted immediately. It always starts in safe mode, but I can't understand what is wrong. The old processor is a pentium 4 3 ghz, not sure what the motherboard was, new processor is AMD Athlon 64 X 2 Dual core 4200 + and I only know that the motherboard is an ASUS socket AM2. Device Manager does not recognize the CPU correctly, it shows just two entries called processor. As far as I can tell, it's almost certainly a driver issue, but I don't know how to diagnose or fix this. I am running windows XP home, I removed my video card, running 2 hard drives at 120 g (M) and 200 g (S), a DVD drive (M) and a reader of CD (S), and a stick of RAM to 1 GB.

  If you have made the change without having to reinstall XP, you will be taking and Pray H@ll. the best thing to do would be to reinstall XP and make sure you have the drivers available for your motherboard available so that you can update the installed chipset. In addition, be aware that if you have an OEM of Windows version, the license is dead when you changed the mother/CPU card.

  I hope this helps.

• I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and has already done.

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

  You cannot uninstall a running operating system.  The best you can do is wipe the hard drive and start over, but which will also remove all programs and documents.

  "malayboy" wrote in the new message: * e-mail address is removed from the privacy... *

  I would like to uninstall window vista home basic 32 bit on my right turn to install the new window and that already.i want to uninstall the vista of old window on my laptop.and I try many times impossible to uninstall vista.please help me.Please,help advice.thank.

• It will cost me to install the new windows 7 on my pc at home?

  was wanting to know if it will cost me to install the new windows 7 download on my pc?

  Hi KayeLady,

  Thanks for posting on the forums.

  Yes. Please see the link below for the options for the different versions you can buy.

  http://www.Microsoft.com/Windows/buy/default.aspx

  Hope that helps.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

  Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

  Message is about: Treo 700w (Verizon)

  A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

  Message is about: Treo 700wx (Verizon)

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• After installing the new version of flash player firefox only charge for most of the sites basic html

  After you install the new version of Adobe Flash Player yesterday, Firefox would not charge most of the sites except in basic html, as I understand is the right term for all the lists in the text, especially on the left side of the screen. They open in Google Chrome and IE. I tried to restore to two days ago, today I uninstalled Firefox and re-installed, I have tried several possible solutions in the support forums, but nothing has worked. I prefer Firefox but it will fall if I can't get this resolved quickly. Note: I only start from the principle that the new flash player was to blame as it happened immediately after. I don't really know yet what he does, it's just one of those things that appears and says he has to be upgraded to the latest version from time to time.

  The Flash player plugin allows certain types of media to be displayed in the web pages. Otherwise, you get an empty rectangle. Usually Flash would not hinder Firefox to load style sheets, images and other elements that add to the raw text of the page.

  You can try the reset function. It duplicates some data key of your active settings in a new file, bypassing some add-ons and custom settings. Your plugins (including Flash) will still be active, but may be disabled manually if you wish.

  More information in this article: Firefox Refresh - reset the settings and Add-ons. Please note that an old parameter file appears on your desktop. You might want to keep this around for awhile in case you need to save something from him

  Does make a difference?

• HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

  Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

  Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

  Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

  I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• When I installed the new windows 10 update my Adobe Lightroom stoped working, how can I fix it?

  Hello

  When I downloaded the new windows 10 my Lightroom won't open. The bellow message appears, and I went to Staples to see if they could repair and they said to contact u because if not, we would need to clear my computer (PC) and do a "clean" installation of windows 10 then re - download all the stuff that would take about 3 days. I use my computer for school and class so I can't get it fixed each time. I also already removed then reinstalled Lightroom and it did nothing. It was working fine before.

  

  Make sure that the graphics driver is up to date. Check once with the Web site of the manufacturer:

  Details discussed in the link below.

  Most applications crash at startup CC

  Please post better post event Viewer log error description screenshot here.

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe