Wireless remote access disk attached to the router wi - fi via USB

Similar Questions

• connection for printing from a computer wireless with a connection cable to the router usb printer?

  Produst name: HP Officejet Pro L7555.

  Works with Windows 7.

  A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

  Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

  1. disconnect the Ethernet cable.

  2. on the printer: Setup > network > default settings.

  3 reconnect the Ethernet.

  Now, remove the printer in Control Panel > devices & printers, then add it again like this:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Remote access is possible from the computer of Windows 7 on a Windows Vista-based computer? Email removed for privacy

  Remote access is possible from the computer of Windows 7 on a Windows Vista-based computer?

  If so, please send Web site or instructions on how to

  answer to * address email is removed from the privacy *.

  Hello

  Please note that it may depend on the versions of Vista and Win 7 you have.

  RTD connection consists on the client computer (the computer that initiates the connection) and a host (the computer on which the connection will too.

  All versions of Windows can act as Clients.

  Can host only Vista/Win 7 Pro/ultimate/Ent.

  Therefore, if you have the OS Home versions', you might be out of luck.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot access Internet even if the router USB adapter Wireless G made the connection and

  Hello, I recently bought a Wireless-G USB Network Adapter with SpeedBooster model WUSB54GSC to go with my Wireless-G Broadband Router model WRT54G2 and I can't access the internet.  The laptop tells me I am connected and that force is Excellent, but when I open my browser, I can't access any site at all. When I try to add the laptop to my network magic on my computer, it tells me that it cannot connect with the laptop.  My Nintendo Wii and Itouch work perfectly with the router so I think it's my browser settings, but I can't understand it.  Thank you!

  Hey, thanks for trying to help out.  It turns out that my firewall did not allow the laptop to access the internet.  I made a few adjustments on my firewall settings and it all worked out great.

• Printer lost access to internet when the router has been changed

  My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years.  Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer.

  A few months ago, the router has been changed and they did something for cable and wireless.  Im guessing they're on separate subnets or something because it is another problem is that I can no longer view the others on the network who are wired, even if I could before.

  In any case, ever since this time, I noticed that some smartphones and tablets had no internet connectivity.  They were connected to the wireless network that gave my internet connection perfect Mac, their signal is just as strong, but they had no internet connectivity.  So I figured that the DNS' have not been read right by these smartphones and tablets, I manually added the DNS' using my mac and now these phones and tablets work very well.

  I guess it's the same problem with my printer now because the only thing that doesn't work is eprint and web services.  I get a message saying that the printer could not reach the server, try again.  Ive restarted the printer and it doesn't matter.  I can see it has a properly assigned IP and I can print wireless for it, but there is no internet access.

  How 'to add' those DNS IPs to the printer?

  Hello quique123,

  Welcome to the Forums of HP's Support.  I understand you get a connection error message when you try to activate your printer Photosmart Plus web services.

  I've included a link to another post with measures, including screenshots, on how to set manual of the printer an IP address manually and DNS servers. As you go through the post, you will notice that it is recommended to use the Google public DNS servers when you set manual DNS servers.  Please do not worry that the screenshots are for a Photosmart 7510, the steps are the same for your Photosmart Plus printer.

• The router configuration E3200 using USB Modem (wireless) to connect to internet

  How to configure a router E3200 using a USB wireless modem to connect to internet? It's my only choice, I don't have a wired connection and I do not have telephone wires and there is no authority to act differently. PLEASE I NEED IMMEDIATE HELP. I WAS TOLD THAT I COULD DO THAT!

  The only option is to use a computer to connect to the internet and then see the E3200 as access point and switch.

  See http://homecommunity.cisco.com/t5/Wireless-Routers/ICS-on-WRT54G-please-please-please-help/td-p/1184...

• WRT110, Vista, wired desktop cannot access utility based on the router's web

  Computer Vista hard wired to the WRT110 cannot access the router. But it CAN get to internet and CAN ping router without losses. The XP machine is wireless, can get internet and CAN ping router without losses, but also can NOT access the router page. Ipconfig displays 192.168.1.1 is the correct default gateway address.  Yesterday, I had to reset the modem to access the router and had to enter all the parameters.  Could access router yesterday but can't today. The IP address is valid from yesterday to tomorrow. I don't understand what has happened to prevent access to the router. I even unplugged the modem to the router and still cannot access router today.  I can't find this problem in the forum, hope this isn't a duplicate request. Thanks for any help

  I have NO idea why, but I can access the Web with IE8 installed utility pages.  Has absolutely no sense to me.  Of course, it must be some kind of safety but my IE use medium-high settings, so I can't imagine what passage of IE7 to IE8 did indeed these parameters.

  Happy now that I can access these pages, finally.  Hope this helps someone else.

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• WHS 2011 Media - Web remote access - a problem with the media of files appearing not

  I'm running WHS 2011.  When I connect via a remote web access and media sharing is turned on, I can see the three categories in the window 'Library' - 'Browse images', 'Browse music' and "browse videos".  I have several songs in the "ServerFolders\Music" folder on the server and I used to see the album art in the home screen remote Web access under 'Browse music. "  Now, the icon 'Browse music' on the screen of remote access Web says "0 songs" even if I have not moved or removed all the songs in the folder ServerFolders\Music on the WHS machine.  If I go to the "Shared folders" window and open the 'Music' it on access web remote, all the music files are listed as expected.

  I don't know how to reset or refresh the window "Multimedia library" in order to recognize the music files I have on the server.

  Please advise...

  Thank you for your help.

  Hello

  You can publish your application in the Windows Home server to improve the assistance:
  http://social.Microsoft.com/forums/is/whs2011/threads

• WRT120N - wireless capability commonly fails and requires the router to restart

  I bought the router WRT120N wireless about a month ago and have found this camera WiFi functionality fails systematically.  I have several wireless devices in our House, but it's the iTouch from Apple that use it most of the time.  Every day or two wireless stops working and I have to rebooot the device through the web administration page.  Then, everything continues to work for a while until what we notice that it has not yet.  I have updated the firmware on the router to v1.0.04 and carefully followed the instructions, but it made no difference.

  The search on the web revealed that it was a widespread and well-documented problem.  Several other messages Forum warn consumers to avoid buying this product cheap and unreliable.

  I'm about to abandon the device back to the store I bought, but thought I'd give another chance to this forum to see if there is any fix or alternative.

  Please notify.  Thank you.

  FYI - I ended up taking my router back to the store I bought and received a new identical replacement unit.  This other has managed to keep the network wireless for a week or so now, so I guess that the former, I had was a dud.

  In the end, none of the suggestions on this topic were no help.  The unit was just defective.

• No remote access after you activate the Radius AAA

  Hello

  I can't access our catalyst 4006 after activating the AAA for RADIUS. I have install IAS on our domain controller configuration / a catalyst as a Radius client and configured a remote access policy that points to an ad group to allow access to the switch. When I try to connect to catalyst by my user information in AD, it seems to crash after I type my password, asks for the password again, then says access denied. This happens both on the console and through a telnet session. I have included below the configuration of my AAA.

  What Miss me?

  Tim

  (Cisco IOS 12.2 v software (25) EWA14)

  AAA new-model

  !

  RADIUS-server host 10.100.x.x auth-port 1812 acct-port 1813 key xxxxxxxxxx

  Server RADIUS ports source-1645-1646

  !

  AAA Radius Server Group server RADIUS

  Server 10.100.x.x auth-port 1812 acct-port 1813

  !

  AAA authentication login default group local line Radius servers

  the AAA authentication enable default group, select Radius servers

  Authentication servers-Radius AAA dot1x default group

  Group AAA authorization exec default for authenticated if Radius servers

  Group AAA authorization network default Radius servers

  AAA dot1x default arrhythmic accounting Radius Servers group

  AAA accounting by default start-stop group Radius servers directly

  !

  line vty 0 4

  by default the authentication of connection

  Tim

  I think that the immediate problem is that the source address of your switch ussed is not address who is pregnant with Ray. The Radius Server is 10.100.182.250 and it is in the subnet of the interface vlan 182. If the address of the interface vlan 182 will be the source address of the Radius request. Difficulty which is to use the command of source ip range address and specify the address at which you want the switch to be used. Of course, in the short term, it would be easier to change the Radius Server to wait 10.100.182.2 as the address of the customer.

  HTH

  Rick

• Desktop remote access - required implementation of the laptop on the desk - says access error message is not available. Both are running windows 7 Home premium.

  I try to set up remote access to my desktop from my laptop and got an error message on the phone, saying: he there was no desktop access even if both are running windows 7 Home premium.  How to establish a connection between the desktop computer so that the laptop can access it remotely? I find IPv4 on the desktop but when I enter it in the laptop, it says no access available.

  Hello

  If I understand correctly you are facing problem with remote desktop access to your computer Windows 7 Home Premium. I suggest you to see the link follwoign to see if OS of family Windows 7 premium supports remote access.

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

• try to download a program from the disk and get the route can be found in re-indexing re-index research research research service troubleshooting troubleshooting

  I am trying to down load a program from a discus for an automotive tool, that I bought.  Whenever I try to load I get the route cannot be found. I loaded other programs without any problems.  It will say get a folder with her inside whichI find but it says that the file does not exsist.

  Hello

  1. what operating system are you using on your computer?

  2. what program you want to download?

  3. have you made changes on the computer before this problem?

  See the methods mentioned below.

  Method 1: Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2: Put the computer in a clean boot state and check to see if the problem persists. Follow the steps mentioned in the article below
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  Answer comes back with more information so that we can better help you.

• Satellite U300 - only the external mouse works via USB

  My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

  Any help would be appreciated. I don't know that I missed something very simple.

  Hey Buddy,

  > checked the button Fn F10
  It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

  Check this box!