Wireless router question: how to acess Channel 13?
Hello
Message from a person very technically challenged!
My router is set to channel 13 and should be able to be used by my pc at home (Qosmio) but he refuses to see the router, now paid twice for a grumpy looking, had changed the wireless card, Tosh make sure it
Hello
I found a very interesting forum, posting on the Wlan Channel 13.
Check this box:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9296&MessageID=32671
Please also check this FAQ from Toshiba document:
http://support.toshiba-tro.de/KB0/FAQ35002P0001R01.htm
Tags: Toshiba
Similar Questions
-
Can someone tell me what is a good and cheap wireless router I can buy so I can connect to Xbox 360 live.
I have an another 360, it would work with a router?
Yes it will work with both devices, and your choice is correct. If you want a cheaper one that you can purchase a WRT54G.
-
Satellite Pro A60: Wireless router Questions
Hi all
I am a novice computer, sorry for my lack of knowledge. I just bought a BT Voyager router for Satellite Pro A60 mt, but can't seem to make it work!I was told that my Sat Pro has a built-in wireless inbulit receiver? (If yes how I turn it on?)
When I conect the router to the phone line saying all the lights on the router everything is ok... but when I try to go to the line, NOTHING!Please can someone help me... ???
Hello
I checked the properties of the Satellite Pro A60 and it seems that the WiFi card is optional on this unit.
In this case, you should check in Device Manager if the minPCI wireless network card is properly installed on your machine.
On the right side of the laptop, you will find a switch ON / OFF wireless. If the wireless network adapter is enabled, the led at the front lights.Now something on the router. Each WLan router typically has an own software installation package. There should also be an instruction how to manage the router.
You should check the router instruction -
Hello
I would use this wireless router with WEP I can access the wireless camera (camera does only WEP encryption).
The camera should be the only device authorized to connect to this wireless router.
I can devote channel 11, so only use this wireless router
I know that WEP can be cracked but I think maybe I can set up the router for it does not matter, i.e.,.
While the camera is accessible by this particular routerso my questions are:
1. can I configure the router so only local outgoing LAN requests http are allowed?
2. any other suggestions about the configuration of router that prevent access to my network?
(using address filtering (by address mac camera only) MAC is worth, but I guess that the MAC address can be spoofed so not a complete solution)Thank you
TomI think that 'toomanydonuts' has provided my solution in this thread:
Thank you
Tom
-
Connect Windows Vista to the wireless router
installed the wireless router. How to connect my computer laptop tosiba windows vista to use without being plugged >
Click Start, connect to, select your wireless router, click on the 'Connect' button below.
I hope I could help
-
You can use your apple TV without an internet connection? If so, how do install you it? I have currently basic cable and that you have a wireless router. Thank you
What you want to do with the ATV without an Internet connection? It is designed as a device of Internet broadcast, so you can access online content via the big screen in the living room rather than the pocket computer in your pocket...
technically I think its possible but you would still need an Internet connection for the installation and update of the software process and even less to download applications and games, but if you don't have an Internet connection apps/games will probably not work. I don't think that there is 'out of play'...
-
How to connect computers laptops xp wireless to a wireless router to connect to a domain
I have a small office where there is a LAN infrastructure, structured in a field with Server 2003. Now I want new computers laptops xp installed to be able to connect to the domain via the router's wireless connection.
What will be the default gateway of the wireless router and what settings should I do on the server. The server is configured as a DHCP server. Now, how computer users mobile xp will obtain the ip address issued, it will be the router wireless of Server 2003.How can I get this configuration works.You must apply to a newsgroup server.
Windows Server forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/ -
How to re - configure a Linksys E1200 wireless router after that I got a new Modem
I just got a new modem. My E1200 Linksys wireless router no longer works. Technical support said it should be redefined to work with the router. How do I do that? Thank you
Hi, feibelal ! You don't need to have an active Internet connection on your Mac to be able to access the user interface of the router E1200. The steps in the link provided by Thaddeus_A should do your router works.
Kind regards
Ethel_10700
Linksys technical support
-
How do I fix my laptop to connect to my wireless router?
How do I fix my laptop to connect to my router wirelrss?
Hello
Check with the router manufacturer, their online documentation and forums support (if any). Most have
excellent tutorials online. The router must be configured before connecting to it.-----------------------------------------------------------------------------------------------------------------------------------
More troubleshooting:
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
How can I block others access to my wireless router?
I have performance slow and even lose connections. I have Comcast and they have suggested that it is 'noisy' of what they see on their end. The technology said that he receives many complaints from users of wireless router.
Hello
Quote: "How can I block others access to my wireless router?
By setting up the wireless router security encryption.
Of the weaker for wireless security, more strong capacity is.
No security
Switch Off SSID (even has No Security. SSID can be sniffed easily even if it is turned off)
MAC Filtering___ (Band Aid if nothing else is available, MAC number can be easily Spoofed).
WEP64___ (Easy, "Break" by knowledgeable people).
WEP128___ (a little more difficult to activate, but "Piraté" too).-------------------
The three above are not considered safe.
Safe starts here at WPA.
-------------------WPA-PSK__(Very Hard to Break).
WPA-AES__(Not functionally Breakable)
WPA2___ (not functionally breakable).
Note 1: WPA - AES the current interpretation level entry of WPA2.
Note 2: If you use WinXP SP3 bellows and not updated, you need to download
the WPA2 Microsoft's fix.Documentation of your devices (router wireless and computer wireless card) must indicate the type of security that is available with your wireless hardware.
All devices MUST be set to the same level of security using the same password.
Therefore, security must be set according to what is the best possible one of the wireless devices.I.e. even if most of your system may be able to be configured to the maximum with WPA2, but a device is able to be configured for maximum of the WEP Protocol, to the whole system must be configured to WEP.
If you need more security and a device (such as a wireless card that can only do WEP) is now better security for the entire network, replace with a better device.
-
How can I change the password of the wireless router?
Original title: change password
Hello, I need help to change my password wireless internet please. I'm not very computer saavy, so I would appreciate simple instructions, please. I have a regular computer, I don't have a modem, a wireless router, access to, (husbands), a printer, my laptop? the cable company, son-in-law has compressed & PS3. The problem is my stepson is autistic and mentally not mature enough to be on the internet and he knows the password. How can I change the password to the wireless internet? Then I'll also have to change it on printer, phone, ect... Or y at - it an easier way to keep, before taking any electronics away from him? Thanks :) WeigeSS
Go to http://whatismyipaddress.com/ and copy your IP address. Then open a webbrowser and paste the IP copied into the address bar. You must now enter your username and password (most often, it is not a WiFi password, but that this service provider you have given - it could be written on the contract or manual). Now, everything depends on what type of router you have. Usually, there is a security link or password somewhere on the screen. Click on it and then you can change the password.
If you need further help, feel free to respond. -
I have the Belkin N 150 wireless router.
Detailed information how do you need?
What have you tried already?
I assumed Wireless (links to general background information):
Router
These links can help (I hope) - http://www.mentorlog.com/2010/networkingwireless/setup-belkin-wireless-g-router-without-cd.html
And for very basic info - http://thetechjournal.com/electronics/belkin-n150-latest-generation-wireless-n-router.xhtml
Windows 7
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Essentially in the router (after its all connected) set the type desired wireless "g" or "n" of work, implemented the encryption, you need WPA2 or WPA, put up the SSID and password, and set mapping in windows network sharing Center, set up a new connection or network.
-
I'M TRYING TO INSTALL A WIRELESS ROUTER FOR MY LAPTOP, THE ROUTER IS NETGEAR, I ALWAYS GET TO THE POINT CONNECTING DOMAIN IS THE ISSUE.
original title: ARTICLE 871122 WZCI think you've got the third-party software installed on your laptop to configure the wireless adapter. Third-party software seems to have disabled the Wireless Zero Configuration (WZC) Microsoft service. You will need to reactivate it.
Follow the steps below to activate the automatic configuration on your laptop.
1. Click Start, click Run, type % SystemRoot%\system32\services.msc/s, and then click OK.
2. double-click on Wireless Zero Configuration.
3. in the startup type list, click Automatic, and then clickApply.
4. in the Service status area, click Start, and then click OK.
Software configuration of certain wireless adapters removes the automatic configuration service. If this is the case, you can try this fix by changing the registry value.
WARNING: Editing the registry can be dangerous, use it at your own risk.
1. click on start - run and type reg. And then click OK.
2. browse this registry key: HKEY_LOCAL_MACHINE es\WZCSVC
3. next, create a DWORD value and name it 'Start' and set it to 2.
-
Hi all. I normally wouldn't have a problem with that, but I must be missing something. I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium. I want to share files and printers. My desktop with windows xp computer is connected to a wireless router. The printer is connected to my desktop as well. My laptop is wireless with the wireless router. I tried everything I can think of to get these two devices to the network. If anyone can help. Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem. Internet works fine. the laptop with windows 7's wireless and internet works fine. just impossible to get the two see each other or share what anyone. Thank you.
With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'
Download & install, create copy, send a copy to the other pc to share its use.
-
The question of the Access Point wireless router
I am considered to be an amateur when there are routers so patient with me. I have a wireless router in my office and two workstations are hardlined (ethernet cable-joint) to the router. Then, in the living room, I have 3 devices (Xbox, BlueRay, directTV) I want on the network. Rather than running three office ethernet cables, I expect to have some sort of (reverse hotspot) where a device could hop on the wireless router and the signal I inflexible at these three devices. Not sure if this would require an Access Point or another wireless router?
Any thoughts would be appreciated.
-J
I suggest that you try to find something on WET54GS5... is a bridge with 5 ports wireless if I'm not mistaken... but since it's under Cisco Small Business, I suggest you could ask more about it here
Cisco Small Business support community
Or you can see WET54G and buy a separate so you switch can accommodate other devices
Maybe you are looking for
-
When addressing and e-mail, addresses always open with "all the address book. This book contains many addresses which are not intended for daily use for most of the mail I write or pass. I want to always open with "Personal address book" to shorten t
-
How to repeat a playlist on ipod v9.3.2
Hello I have an IPOD V9.3.2, in the music that I have several playlists that I use for sleep learning. I would like to know how to flag the playlist to loop. If I go to the playlist, O can see a list of the music in the list. on the left side, I see
-
Install the link Dropbox with Terminal mpkg file
Hello I'm looking at the best way to install a mpkg on multiple Macs in our society. With our MDM solution limited, it will be via a script/Terminal command. I wonder if someone would be able to help the best way to do it. I placed the file in a l
-
Why is text on Google lists more small that it's in my Internet Explorer browser?
I have already solved this problem myself, but I don't know how to get rid of my question! In settings, I opted under Options for a certain size of type and that solved my problem, and I learned this control and two characters will increase the size
-
101 Kira - cooling performance messages fan speed
I am the proud owner of a 101 Kira may 2014, but in the course of 3-4 months, I have known problems more and more with the cooling fan on the ultrabook operating at very high speed and being very noisy, even when there is no processor intensive appli