wireless software conflict or problem of driver... not sure.

Similar Questions

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• E8B15UA #ABA: my hp pavilion notebook is needs a driver not sure what I need or how to fix it

  I have a hp pavilion notebook. There is a yellow exclmation point next to the unknown device. I looked at other positions. I don't know how to solve this problem. One post said I had to unzip a file and save it to solve the problem do not know how to do this. Help, please

  I need the hardware ID of the unknown device to eliminate other conjectures.

  Go to Device Manager and click on the unknown device in need of a driver.

  Then click on the Details tab in the upper part of the device window unknown.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the hardware ID element

  After the first string of characters you see in the window.

• Please help - what software would be useful? (im not sure in the right category here)

  Hi guys,.

  I was wondering if someone could point me in the right direction about what follows. I am a student in abrasive particles and I several stills SEM of 10 to 120 Micron particles. I'm looking for a software that will allow me to easily calculate the various properties related to the particle, like size, geometry, space ect - or anything really that could be useful for me to compare one particle with another.

  (1) is there some features that may be useful to know when it comes to comparing the abrasive particles?

  (2) is it simple software available that would be suitable (I recommended a program called SIGMAscan but it may seem too much of an investment to about $900 for what I need to).

  Thanks guys, appreciate any comment

  Chris.

  Thank you

• HP Deskjet 3050 a J611: Driver not recognized HP 3050 has J611

  I recently got a printer HP Deskjet 3050 a J611.  I get an error message saying driver is not updated.  I downloaded the driver (not sure if it was good because there is a choice of 3) (J611a, J611b and J611g).  I tried again and it still does not.  The HP troubleshooting page recognizes the printer is connected, but it won't work.

  Please help to get very frustrated.

  Thank you

  @Captainyaya,.

  Please follow the steps below:

  1. disconnect the USB.

  2. remove the HP 3050 a DJ software go to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all the software DJ 3050 has disappeared from the list programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your 3050 a DJ (DO NOT connect USB until the software prompts you to):

  HP Deskjet full feature software and drivers

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know if it was successful! I'll watch for your reply.

  Thank you

• R500 - wireless driver not found

  Hello

  Recently, I ran the Thinkpad rescue and recovery to refresh my laptop and start with a new Windows XP.

  I also ran through system update and got all the latest drivers and software updates.

  As a result, I noticed that my wireless is not working and is not even detected. To do this, I downloaded all the drivers LAN wireless available following for ThinkPad R500 - 2732 - 6EG - Windows XP Professional:

  1. Intel Wireless LAN (bg, abg, abgn) for Windows XP - ThinkPad - v15.03.2000
  2. ThinkPad 11 b/g/n Wireless LAN Mini-PCI Express card II for Windows XP - ThinkPad - v1.00.0029.8
  3. Wireless LAN ThinkPad (11bg, 11abg, 11abgn) for Windows XP, 2000 - ThinkPad - 7.6.1.260b

  But my Intel PROSet/Wireless WiFi Connection Utility said that the "driver is not installed' even after rebooting.

  I also check the Device Manager and noticed that under the NICs only below:

  1. Network adapter 1394
  2. BroadCam NetLink (TM) Gigabit Ethernet

  What could be the problem?

  PS: Please note that my wireless was working properly before going through the rescue and recovery.

  Waiting for your feedback as soon as possible and thank you very much for your support in advance.

  Kind regards

  Eli

  Welcome to the forum!

  What an interesting R500 you have... I'm jealous...

  Your ThinkPad as she left the plant:

  P7370 (2 GHz), 2 GB RAM, 320 GB 5400 RPM HD, LCD 15.4 in 1680 x 1050, 128 MB ATI Radeon HD3470, CD-RW/DVD-RW, Intel 802.11agn wireless, Bluetooth, Modem, 1 Gb Ethernet, UltraNav, chip secure, reader of fingerprints, camera, 6 c Li-ion, WinVista Business 32

  Even before to contemplate wireless, I would install the chipset driver first.

  It's the good wireless driver:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/g1w218ww_x32.exe

  After downloading and extracting, you will have to go in C > drivers > win > Wlanint and run the Setup file from there.

  The rest of the drivers should be available here:

  http://support.Lenovo.com/en_US/downloads/default.page?

  Or, you can install the system update and let him find the missing drivers for you.

  Good luck.

• Could not uninstall 'Intel (r) PROSet/Wireless Software for Bluetooth (r) technology.

  Hi Experts,

  I'm trying to upgrade my notebook windows 7 ultimate Vaio SVS151190X to windows 8 and make the following message.

  "

  Intel (r) PROSet/Wireless Software for Bluetooth (r) technology

  Uninstall this application now because it is not compatible with Windows 8.

  Not if same answer, I click the button uninstall next to this message.

  I couldn't uninstall it to uninstall a program in Control Panel either!  It gives a message to make sure that the adapter is installed and activated.

  I see Google, a lot of people have this problem and some of them got to be resolved through "a Fixit button to http://support.microsoft.com/kb/2438651. But this link doesn't work anymore! Did Microsoft changed this link?

  Any help is greatly appreciated. I'm stuck in the Middle now!

  Thank you

  Palcok thanks for the reply.

  Yes I checked the sony website and my system is supported.

  My problem is now solved. I went to the Intel Web site and updated the driver and then it let me uninstall.

  Thanks again

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• attach the problem. Tablet connection error: driver not found

  I can't connect my tablet which has android v4.2 Jellybean. It shows driver not found. what I can do.

  Original title: attach problem

  Hi Andre,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing when you plug your tablet with Windows 7 system. I will definitely help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, "Driver not found"?
  3. Connecting the Tablet via a Wi - Fi hotspot connection when you mention, "tethering problem? If this is not the case, how you try to connect the Tablet?
  4. What is the brand and model number. the Tablet?

  The question seems to be resulting in an incompatible or damaged driver that obstructs the connection. First, I suggest you to check if you are able to connect the Tablet via a USB cable.

  In addition, I would suggest trying the following methods and check if the number is reproduced.

  Method 1:

  Run the network troubleshooter to verify connection of the Tablet problems.

  Using the troubleshooter from network in Windows 7

  Also, I suggest you run the hardware and devices Troubleshooter to check for problems with the related drivers that can help connect with the tablet.

  Open the hardware and devices Troubleshooter

  If the problem persists, try the following method.

  Method 2:

  Manually install the Windows 7 compatible driver from the manufacturer's Web site.

  For your reference:

  What to do when a device is not installed correctly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Not able to install "Intel R PROSet/Wireless Software for bluetooth.

  Original title: error message: there is a problem with this windows package install, a program required for this install to complete could not be run. Contct your support personal or package provider

  When installing R from Intel PROSet/Wireless Software Bluetooth, it shows "there is a problem with this windows package install, a program required for this install to complete could not be run." "Contct personal support provider or the package '... Help, please

  Hi Max,.

  Apologize for the delayed response.

  Have you tried Microsoft Fixit?

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Maybe delete the content of some files might help after uninstall completes. Then, try again. This was given in the Intel forum.

  C:\Users\your-user-name\AppData\Roaming\Intel

  C:\ProgramData\Roaming\Intel*

  C:\ProgramData\Intel*

  C:\Users\your-user-name\AppData\Local\Temp

  I will also send you the application in support of the Intel community.

  https://Intel-OpenPort-v7.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

• D: drive not appearing does not, impossible to install software.

  Original title: d ' drive not appearing not

  the attempt to load software and player D appearing not

  Hello

  To provide the proper resolution, I would need more information on your side.

  1. is the specific issue during the installation of a particular program?

  2. do you get an error message? If Yes, what is the exact error message?

  3. are you able to see D: drive in Windows Explorer?

  I suggest you try the procedure described in the article and see if it helps.

  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Check out the link for more information.

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I use lightroom six. My problem is some of my photos have several purple lines across them and can find a way to get rid of the.  The camera I use is a fujifilm X100T.  I tried different software and the problem is not there.  so I Don t

  Some of my photos have a purple line which passes through.  I use Lightroom six, but had the same problem with the previous version.  I tried different software and do not have the same problem, so I don't think that the problem is with the camera.  The camera is a Fujifilm X100T.  Any idea?

  Purple lines on the photo almost always indicate that some piece of hardware caused a corruption of file. It could be any piece of equipment in the transmission of the record of the caard of the camera to the computer. One obvious thing you can try is to move the photos to the computer via a USB drive / different to different cards. If possible, you can try to copy the photos to a different computer and then import into Lightroom. Run diagnostics on your hard disc controls and the memory of the computer.

  Other software may display the file does not cuorruption, but it is usually display the preview JPG that is embedded in the RAW file, and this JPG preview is very often very well when the image RAW itself is corrupt. So the fact that else sofrtware shows not only the problem is irrelevant.

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Problems connecting to internet - says network cable disconnected, not sure I have the correct driver installed.

  Had a big storm - got the new modem.  but they said that my drivers where missing or damaged.  Downloaded Marvell Yukon of gateway - to the GT5432 model. Always says cable unplugged network. However, Bishop says peripheral device works correctly. Don't save: no update-unable to connect to the internet.  I uninstalled and reinstalled; rebboted, etc. - still nothing. It has a problem with the PCI connection - no driver, but I don't see anywhere to down load or know what to download. Oh and another adapter on - think 1394 - when I turn that on and off the wonder; It shows the signal for the 1394---400 and does not say his unplugged, but still can not connect to internet.
  The "old" computer to try to find information; noticed that said, unplugged network cable but it allowed me to connect to the internet. When I disabled the 'extra' adapter message there went, speed signal only at 100 than at the 'old' calculation is not any other PCI devices connection listed.

  I'm not sure of what continues.

  The 1st computer was working fine - then picked it up to move it to where it belonged to my office and that's when he went out-made no sense to me!

  Because you seem comfortable opening your computer, have you tried re - a corner of the map (with power off, remove the card and reinsert it into the slot, be sure to exercise static precautions if you are in an environment of low-hu7midity).  If there is an empty slot, you can also move the map Marvell to another location.  See the comments below.

  It's a long shot, because even if you did not provide the complete ipconfig output, the data that you have provided appeared to be normal, but...

  Open network connections (start > run > ncpa.cpl > OK)
  Right-click on the icon for your network adapter, and then select Properties
  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Local_Area_Connection/Properties/General/Index.shtml
  Issues related to the:
  In the upper area, under 'Connect using' said 'Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller?  If this is not the case, what does say?

  In the second box, what are the items are listed under "this connection uses the following items"?

  The only other thing I can think is that the Marvell Ethernet card was damaged in the same storm that got your original modem/router.

  *******************************************

  According to Gateway, the GT5432 has 4 card slots:
  A PCI Express x 16 (GUI)
  A PCI Express x 1
  Two PCI Conventional

  Your motherboard should look like this:
  

  Orange, top, connector is the PCI Express x 16.  You probably have a video card in this slot.

  The short white connector is the PCI Express x 1 connector.

  Two more long white connectors are the standard PCI slots.

  If I understand your installation, you should have the Marvell Yukon map into the slots of two down and your Agere modem on the other.  As long as you have the SMC1244TX PCI card, why don't just remove you the Agere modem or the card Marvell and insert the card CMS in one of the two PCI slots?  You are not using the modem and the working hypothesis is that the Marvell card does not work, so there is not much to gain by leaving a card in your computer.

  Download the user guide and drivers for the SMC here--> http://www.smc.com/index.cfm?event=viewProduct&localeCode=EN_TUR&cid=9&scid=51&pid=238 map

  Moreover, assuming that your open slot is the short PCI Express x 1 slot, you can buy another Ethernet card that will work in this niche: see--> http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100010064%20600016290&IsNodeId=1&bop=And&Order=PRICE&PageSize=100

  If I were you, I blow up the cheaper models and get the Intel EXPI9301CT $ 36 10 / 100 / 1000 Mbps PCI Express Desktop Adapter Gigabit CT.  Note that this is the same card with a similar name (with close to 400 customers) which sells for $29,94.  The price difference is because the cheaper "BLK" letters in the description, which means that it is "sold in bulk" and has no drivers, user guide CD or anything else in the box.  There are several negative comments from people who do not understand this difference and then had trouble finding the driver for the card on the Internet.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.