Wireless switch stays blue even when when off

Similar Questions

• P300-sensitive keys unresponsive and stay on even when laptop turned off

  Hello

  I have a P300 - 18M and the sensitive keys has suddenly stopped working, none of them are to be pressed (usually the light goes on).

  So I rebooted, and they were always the same. I can stop the laptop and the fires remained, even when I unplugged it.

  I then disconnected the battery for a minute, put back in, kicked upwards and now the buttons work correctly once again, however, I wonder, I would do anything to this topic, because my warranty runs a little more than a month, and I don't want to break right after...

  Also, anyone else has experienced something like this?

  Thanks in advance

  Jack

  Hello

  It's really strange question, but if it works again, so I don't think that there is a serious problem.
  Of course, you can call Toshiba nearest service and ask for help, but if everything works well again I think there is no reason to panic.

  Service can test with own preinstalled OS and if everything works fine you will answer for laptop.
  Play a little with these buttons and features to test to be sure, everything is OK.

• Droid Razr Wifi battery drain even when off

  I just upgraded to Jelly Bean 4.1.2 4 days ago. I noticed that my percentage of remaining battery fell a little too quickly.

  In the battery usage screen, I noticed that wifi was consuming 8 to 12% of my battery use. Even if it's OFF, the automatic connect feature wifi was off, and the wifi symbol does not appear on the top bar.

  When I activated the wifi, it would normally connect

  In graphical battery level screen, the bar under the graph showing the duration of use of wifi, indicates the wifi on almost constantly even if wifi is turned off.

  The only time where the wifi bar shows a gap is when, after actually using wifi and I turned it off, it would interrupt its use but only for a few minutes at most before the bar itself turns on.

  I have attached a screenshot graphic. Each break in the bar wifi use means that brief or two minutes after turning off wifi before it turns somehow reignite.

  Airplane mode seems to be the only way to keep wifi active exhaust the battery out of my phone.

  Everyone has similar problems, or have any suggestions?

  
  

• Ethernet light stays on even when DV7 series laptop has stopped

  Product: HP Pavilion DV7-7008tx

  OS: Windows 7 64-bit

  Question: When I turned off my laptop and leave the ethernet cable is connected, the ethernet light stays on. Remove the cable turns the light off, but put it back brings light on.

  It's supposed to happen, or there at - it a way to stop this?

  Thank you!

  You have the Setup "Wake on Lan" in the BIOs? The function to the computer be awakened my network entries. You will need to start in the BIO to disable this feature. You may be able to disable this feature in Windows 7 as well. Here is a good article on how to enable/disable the wake on LAN feature: Wake - on - Lan (WOL) for Windows 7 Made Easy!

  I hope this helps!

  Sean

• Why DW does change my links to blue even when I change with CSS?

  I'm having a problem with DW doing my weird colors links: sometimes blue, sometimes the same color as the rest of the text. As you can see in the attached screenshots, in DW links are appropriate color (#999966), but in Chrome two links are correct but one is blue! I opened the file in Firefox, and all three were blue.

  Any ideas? I'm not much for coding, I use mainly CSS Editor integrated in DW.

  Thank you

  

  The reason is that the CSS for some of the link colors missing a crucial octothorpe (symbol #)

  Change

  a: link {}

  color: 999966.

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #999966;

  }

  a: hover {}

  text-decoration: none;

  color: ff6633;

  }

  a: active {}

  text-decoration: none;

  }

  TO

  a: link {}

  color: #999966;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #999966;

  }

  a: hover {}

  text-decoration: none;

  color: #ff6633;

  }

  a: active {}

  text-decoration: none;

  }

  NOTE: the page is invisible in Internet Explorer, because the opening HTML comment inside of the

  TO

  a: active {}

  text-decoration: none;

  }

  -->

• ConfigFree on Satellite A80: wireless switch is OFF, when its actually

  I've seen several comments on this problem, none of them is resolved.
  I'm running an A80. Until I updated the driver wireless and Configfree, Configfree has worked well.
  Now, however, no matter what I do, any driver, I installed, or what version of Configfree, now they all insist that the wireless to cut when it is indeed running.
  Everything except the Radar works very well. Even now, I am connected to the wireless network.
  However - by selecting the Configfree Radar showed the error message
  "Wireless is disabled. Please activate the wireless communication switch.

  It drives me crazy. I spent three days on this problem. I guess that's not really necessary, because it is only a display - but I want it to work! :-)
  I am a very experienced user, but this one is difficult. because I suspect its software based really.
  I can't believe that in the world, with many people to see this problem, that Toshiba does not found the difinitive this problem cause and posted a fix.

  In summary.
  With original features such as pronounced - it worked and displayed near the wireless stations.

  After the upgrade to the latest drivers wireless and Configfree - Configfree actually works but WILL NOT operate the Radar, because he insists on the fact that the wireless switch is DISABLED, when in fact it is powered.

  I tried everything, including the FN + F8 - which also seems to be unresponsive. But it could be another problem, I hope. Not interested in this, because the wireless is still on.

  If anyone has a solution that works, I'd love to hear about it.
  Thank you
  Robert

  Hello, Robert

  In my opinion ConfigFree is one of the best utilities offered by Toshiba. This utility is pre-installed, I think, on all models of laptops Windows XP Home edition, and I can't imagine that there is a bug.

  All of the tools and utilities that you can find in recovery image is suitable for each model of laptop, tested and I really can't imagine that such bug may be there. It is very interesting that you wrote on update. Sorry but I checked the original version and the version offered on the Toshiba download page, and they are absolutely identical (ConfigFree V5.00.45).

  I use two Toshiba laptops, both with WXP and I use the CofigFree version that is included in the recovery image. It works perfectly and I see no reason for update (if this update exists, but I don't believe that).

  So it will be interesting to know what version of ConfigFree you use and where you have founded an update. Please be so kind and give us more information about this update.

  Maybe a few links to other multiple posts may also be useful.

• AC/battery lights - should they be lit even when the device is off?

  Hello
  Recently taken a U300. Can someone please help... are the AC / battery charge lights supposed to stay on blue all the time... even when the lid is closed and the unit is turned off (but still plugged?)
  Would appreciate any help
  Thank you

  Yes. If the laptop is turned off but connected to the power supply the two LEDs will be all the TIME.
  When you disconnect the power supply both will be OFF.

• I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8

  I can't turn on my wireless (wifi) on my laptop, even when I tried to press the function key and F8. I have a toshiba laptop, and there is no switch on the side of my computer what is expected? Help someone?

  Hello

  My older Toshiba has a power switch WiFi.

  My new Toshiba has a WiFi switch above the F keys, although I do not know which varies
  by model. So check with Toshiba support, their documentation online and drivers, and
  ask in their forums where there will be others with the same model.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• voice on does NOT even when her off in settings and return to factory reset

  voice on isn't turned off, even when its off in settings and I did a btw the last Apple tv a factory reset update

  For the VoiceOver:

  Settings > general > accessibility > voiceover

  For a description of the Audio:

  There are two parameters that can affect the audio descriptions; the first is a universal framework and can be found at settings > general > accessibility > Audio Descriptions and the second is a parameter that affects the movie playing, it is sliding down while the movie is playing and change the language setting on the audio tab.

• Satellite P855 - 10G is low on battery power, even when it is off

  Hello world

  I bought the Toshiba Satellite P855 - 10G, but I m terrified because he is low on battery power, even when it is off...
  Anyone know how I can fix the problem?

  Best regards
  Igor Tarelho

  Hello

  Access the BIOS and disable options like: wake-up on LAN and keyboard.
  In Toshiba HW Setup I should disable the USB Sleep and Charge feature as well

  The two options enabled to discharge the battery, even if the device is OFF

• Portege R700 - releases of the battery even when power off

  Hi all

  I had a search on the forum but not found all the messages related to a question, I do experience where the battery will run out at night even when the R700 is powered off.

  I recently disabled the option of USB charge but this has not resolved the problem (even if I never used it actually load anything, it seemed to me a good starting point).

  I was wondering if this issue has been seen a resolved elsewhere before asking Toshiba to replace battery?

  Thank you
  SystemShock.

  Have you also tried this - http://aps2.toshiba-tro.de/kb0/FAQ9C015N0001R01.htm?

• my firewall in Microsoft Security databases continues to go off even when I check manually on...

  Original title: firewall
  my Microsoft security essentials guard firewall will even when I manually check on... can you help me with the problem... I never turn manually, it just turns off by itself

  MSE has no firewall.

  Your message is in the forum for the users of the software program anti-malware for Microsoft Security Essentials (MSE).  Suggest that ask you for help in the Forum 7 Win http://answers.microsoft.com/en-us.

  I know you're under Win 7, but see if what follows will help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/why-does-my-firewall-keep-turning-off/49902fd3-c0f2-499B-b2b1-41e029bc0e22

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  Good luck...

• I can't see the list of available wireless even when connected to wireless internet connections.

  I can't see the list of available wireless connections. So I can't connect to new wireless connections as I have not logged in before. The icon in the taskbar that would show you the possible connections disappeared. Nothing shows under connections network under Favorites network even when I'm logged in. I can pick up internet connections from earlier I can't see that one that is connected to or control it. Help, please. Thank you.

  Hi CorneliusE,

  1. what service pack is installed on the computer?

  2. what exactly happens when you try to view wireless networks? You receive error message nay?

  3. do you have security software installed on the computer?

  4 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article and check if that helps you find the wireless network.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  Note: Article applies to Windows XP SP 2, however, can also be tried with other versions of Windows XP as well.

  Method 2: If the method above is not enough, you can consult the following articles and check.

  How to configure TCP/IP to use DNS in Windows XP

  http://support.Microsoft.com/kb/305553

   

  To test TCP/IP connections by using the ping and the commands net view

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

   

  Let us know if that helps.

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.

• I've suddenly lost recording function - even when I put them in a new file it works for w a while then turns off!

  I've suddenly lost recording function - even when I put them in a new file it works for w a while then turns off!

  Close InDesign and relaunch it and IMMEDIATELY hold down Ctrl + Alt + Shift (Windows) or Cmd + Ctrl + Opt + shift (Mac) and answer Yes to the dialog box asking if you really want to replace the preferences.

  If you are not asked the question, you do not press the keys quickly enough!