With Image problem multicolumn Listbox entries

Similar Questions

• TreeField focus with image problem set as background?

  Hello

  I have a treefield with an image as the background for its elements. Now, the problem occurs when the child is to the point. The image that is displayed as a child was similar to the text intendation. I don't want that. I want to have the entire line with the image.

  No idea how to go on this issue.

  Hello

  This has been fixed with the TreeField invalidateNode method.

• Differences with the setting 'Multicolumn Listbox' palette 'Silver' and the 'modern Palette.

  Hello.

  While I was working with these controls in a user interface, I found a strange behaviour between these two controls. Basically the 'Multi-column Listbox' control 'palette of money", which represents a 'table 2D', it appears always initialized with a null value in the first column and line 6, on the contrary that the 'multi-column listbox' control in the 'modern' palette appears not initialized.

  Is this a normal behavior?

  

  Kind regards...

  Hi Jonathan,.

  It has been reported previously in R & D as 382668 of the CAR. It is always present in LabVIEW 2012 SP1, but it has been assessed to be fixed in future versions of LabVIEW. Thanks for reporting it!

  Kind regards

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• Inspiron 1525 - problems with image restore factory (need help!)

  Hi all
   
  I have a problem with my Dell Inspiron 1525, I can not solve... so please help me!
   
  My Windows Vista Home Edition crashed while installing an update and now could not start more (I always get this bad blue screen during startup), so I would like to repair my laptop using the Dell factory image.
   
  I'm doing... .with related problems
   
  1. I press F8 during startup, but there is no entry "Dell factory image restore" or something like that (I even tried each one entry but nothing factory imagine restoration).
   
  2. by starting with a Ubuntu live cd, I can see that there is a partition that contains (among other files and folders) that image (:\dell\image\factory.wim) and a Tools folder where there are files imagex.exe and pcrestore.exe
   
  3 one... Using a pen drive usb bootable containing a bootable back version, I Prime the system. I also put in the usb pen, ntfspro.exe in order to read the ntfs partition
  b. I went in D:\Tools and run this command:
  > PCRestore.exe --> but I received an error message indicating that this program cannot be run in dos mode
  c. so I tried this other person (I've read here in the Forum):

  > imagex/apply c:\dell\image\factory.wim 1 c:\ --> but I got the same error as above, it is impossible to run this program in dos mode

   

  4. in addition (and I think it's weird), I tried to boot with the dvd operating system shipped by Dell with the laptop: loading at startup of Windows, but just after the progress bar (green) appears at the bottom of the screen, it blocks showing again this bad blue screen!

   

   

  Now I don't know what I can do!

   

   

  .. .Please help me!

   

  Is there a way to restore the laptop with the Dell factory image?

   

  Thank you

  Orlando

  orlando1,

  Thank you for using the Dell Community Forum.

  When you press F8 and the menu, choose the option which reads 'Repair your computer' and follow the menu to restore the system.
  

  This utility formats the partition of hard drive to the operating system before you restore the original image. This means data on that partition is deleted and cannot be retrieved.

  If you create a second partition with a third-party utility, Dell Factory Image Restore remains unchanged until the partition of the image is not deleted.

• Problem of multicolumn listbox drag / move

  Hello!

  I would achieve drag and drop listbox with multicolumn listbox, but with the following rules:

  -I want to be able to insert when inserting between items already added in muticolumn listbox left say that on the first column to start. Also, I don't want empty spaces between the elements. So that means that the last line you can drop is always the empty line frist in a multicolumn listbox.

  default listbox allows basic drag and drop and between the two elements. But as soon as said an event code block diagram between the two elements drop disappears and I don't know how to manage programmatically.

  I fought for it a little too much.  My key was the fact that in the case you should keep or add new data in the data table.  Always be drag-and - drop of working systematically you like in LabVIEW is a pain.  Impossible, you could spend more time on this one function of user interface you think to go inside.

  http://forums.NI.com/T5/LabVIEW/why-does-adding-an-event-change-drag-and-drop-functionality/TD-p/321...

• Problems with images after the subclips

  Hey there

  Today I woke up to see all subelements, I made my most recent project. Just today, footage looked more pixelated and blurry.

  What might of happened? When I stop the image the quality is exactly as it was before. But when played his more pixelated.

  Some of the images was shot at a lower resolution, but when I put the size of the screen to the appropriate resolution quality always looks bad.

  Would this have something to do with the manufacture of the subitems? Even go back and see the clips that came the subclips: the film is even more 'pixely '.

  Any help appreciated

  @

  Hi pavalanche11,

  Sorry for the problem. If it is fixed?

  Please consider these points for this problem:

  1. it looks in any case related to subitems.

  2 as you mentioned after a break the clips, they look very good, but not the same case playing; It could be linked to the resolution Pause and play in the monitor Panel.

  You can get these settings, either by clicking the exit button in the lower right of the monitor Panel or by right clicking on the items in the monitor Panel.

  3. you also said that you pulled these clips at a lower resolution. By changing the values in the resolution of reading as suggested above, they may work properly.

  Here is the text of pdf help Prelude:

  Some formats are difficult to display in full motion by reason of their high compression or broadband playback. A lower resolution playback faster but at the expense of the quality of the image. This compromise is particularly visible when you view the other H.264 and AVCHD-based codec of the media. Less than full resolution these formats have turned off error correction, and artifacts are common during playback. These artifacts, however, do not appear in the exported media.

  Use separate reading and resolutions of break to better control the monitoring experience. With images high resolution, resolution of the reading to a lower value (for example, 1/4) for smooth playback and the resolution of the break in full. These settings allow you to check the quality of the details of development or the edge when you stop playing. Cleaning put the monitor resolution of reading, stop no resolution.

  

  I hope it helps. Customer feedback is important to us. Continue to write in the case of any confusion.

  Thank you

  Mayjain

• Problem in Add entry with 99 k attributes

  Hello
  
  I have a problem with a ldapmodify to sunlight DS 5.2 P3.
  
  My ldif has an entry with the managedDomains attribute 99472 (managedDomain is multivalued attribute).
  
  When I try to add this ldif in my ldap, I have a problem:
  
  adding new entry providerName = example, o = Com
  ldap_add: failed to contact the LDAP server
  
  If I divided this file into two files with 50 k attributes in one and 49472 in another, try to add it, it works.
  
  If I delete the first file (with 99472 attributes) 1000 managedDomain and I try to add this new file (with the 98 k attribute), it works too.
  
  Any ideas?
  
  Note: All tests were launched from the same machine.

  This is probably why you now see this kind of error. You could empty the physical input (attribute nscpentrywsi) to get an idea of what is currently his size.

  Anyway, once you increase size BER [you must shut down the instance of DS, set nsslapd-maxbersize: 4194304 in dse.ldif (that is 4MB, but you can increase up to 2147483647 = 2 GB), restart DS instance] you should be able to get around this limit.

  Kind regards
  Marco

• Problem with image .png in black boxes in InDesign

  Hello

  I hope someone can help me with a problem I have with some .png files.  When I try to put some .png files in my InDesign document, they come as just the black boxes.  The .png files are created by a third-party application, (w/MathFlow EditLive) but if I view the .png files in Fireworks or other viewers the image, they seem to be fine.  I tried to look at the properties of the image inside InDesign, to see if distorting them, it might work, but I'm not a graphic designer by trade so my knowledge is rather limited.  Any help would be greatly appreciated.

  Data sheet:

  Windows XP

  Suite CS4 including:

  Adobe InDesign CS4

  Fireworks CS4

  Thank you

  Josh

  Is it possible that some of the png have Alpha channels? Can you open in Photoshop and save as png? What happens when you put these files?

• Problems with images in Muse

  We have at any given time 2 or 3 photos on our website that half is cutting.  Go Daddy, we use for our accommodation.  The lower half of the space allocated for the image is gray or white.  We have removed the images several times, that she replaced, re added the same photo, troquee the spaced which image goes where and whenever we have repeat the site 2-3 images are cut.

  Our Muse and BC are perfect, the question is considered only in line on the published site.  It is not always the same place or the affected image, but as soon as we fix one, another Cup.  I am unable to put screenshots here but would be happy to send an email to someone who can help.

  Portfolio

  The link above is to the portfolio page on our site where we had the question.  At that time, upward, stainless steel countertops is cut, 2-3 of the way down the page, the image of cable railings and planter boxes is cut and further down is so the footrest bar. It is meaningless, as soon as fix us an image that another task is assigned.  Once we have removed the pictures and re added, we had images in different places, we used different images - at any given time, there are 2-3 pictures with the bottom half cut.

  Go Daddy told me that our text has been added as an image with brightfield, and our images have been added as a backdrop, background display 'options' not 'image options.  This is not correct, our test is added as text, and we can change it.  Our images are added in the form of images, with "image options.  I'm on the phone with Go Daddy right now (one representing different of course) and they tell me that he could not have told me that they do not have a way to see the 'options' we would.  So I'm really pleading just for anyone who thinks they can help give a shot - please and thank you!

  Cutting on the website photos

  Here is a link when we have asked this question previously but ceased to answers

  As mentioned in the previous post and you mentioned that it works in British Colombia, please provide the url of the BC site too which might help in the investigation.

  Thank you

  Sanjit

• Positioning fixed active cell in multicolumn listbox

  Hi guys, I have a problem and maybe you can help me.

  I'm doing program to choose something (in this case time string). I want to have a fixed cell in the middle of the listbox multicolumn with active value and clicking the values button to go to the right or to the left. See below.

  

  1. by clicking on the 'Right' button, it should swich for:

  

  2 click on the same button, it should go to:

  

  and so on. Same thing in the other direction.

  Is it possible to achieve with multicolumn listbox? The total width of the list box must be fixed and should not be able to change.

  Afted edit the active cell and slaughter in the program and executes again "reset default" does not work because the last cell of the highlihgted is still 200px wide and he shoulg goes back also to 100px illustrated in the image below.

  

  What I am doing wrong?

  Thank you very much for your help!

  Something like that?

• Create a multicolumn listbox

  How to create an image of a multicolumn listbox?  I have data in a multicolumn list box and I need to send it to a pdf report, and I am able to add pictures of control to this pdf report.  I want to resize the image to the multicolumn list, but maybe I can do it by transforming into an image and adding this image to report pdf instead.

  In short: is it possible to add a resized image of multicolumn list to a report, with no 3rd special stuff gone?  Or in the immediate future, how can you create an image of a multicolumn listbox and send it to an image control?

  To register a control in a JPEG, PNG or BMP file in LabVIEW 8.0 and later versions, follow these steps:

  1. Place your order on the front panel.
  2. "" On the block diagram, right-click on the control, and then select Create "invoke node" Get Image.
  3. "' Go to programming" graphics and sound "photo of the functions. Select RGB to Color.vi and place it on the block diagram.
  4. (Optional) Create three numeric constants or controls and wire a digital to each terminal on the RGB input depending on the color. These figures are used in the color of the proportion of red, green and blue and will be used to set the background color of the control's image.
  5. (Optional) Wire the output terminal of color the RGB function of color at the terminal entrance of BG Color on the invoke node.
  6. (Optional) Create a digital constant and it wire to the terminal of the depth of the Image on the invoke node. Select a number of image (usually 4, 8, 16 or 24) bits, then type it in the constant.
  7. "" Go to programming "graphics and sound" Graphics Formats, select the file image screw entry (JPEG write file.vi, file.vi write PNG or BMP write file.vi) and place it on the block diagram.
  8. The leads of the node invoke in the entry of the data of the image of your image file selected for writing VI Data of Image .
  9. Instead of XY Graph Refnum we refnum multicolumn in your case list.

• HP ENVY 7640: Jobs of text with images - printer cancels

  When I print a text with images document the printer stop printing and cancels the print job when it starts to print any image.

  Help

  Hey @sudiegal!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that may fix the problem.  I see that the printer cancels jobs when you add a photo to you text document.  The first thing I suggest is to remove the printer by resetting the printing system.  After removing the printer add printer and then try printing the document again.

  To reset the printing system:

  1. click on the Apple in the top left of the computer icon

  2. click on System Preferences

  3. click on printers and Scanners

  4 press and hold 'Ctrl' on the keyboard and click with the mouse in the space below the printer

  5. click on reset the drop-down list printing system

  6. we may request for Mac ID and color wheel for a while until the printer is deleted

  

  To re-add the printer:

  1. click on the Apple in the top left of the computer icon

  2. click on System Preferences

  3. click on printers and Scanners

  4. click on the plus sign (+) icon in the list of printers

  5 Select your printer

  6. choose HP ENVY 7640 series in the drop-down list next to 'use' or 'print using '.

  7. click on add

  

  If please, after back and let me know if it works for you!

• Imaging problem

  I have a Pavilion hpe-h8-1030.  My C drive becomes flaky I want either image or clone the drive to another.  However, when I run the software, (3) drives are RAID overall and are unselectable.  As all three Seagate drives, I used their software, being able to select a source drive but cannot select the destination drive.  It seems to me, to the eye without instruction, the problem may come from all drives (USB drives are very good and can be selected) are tied up in the RAID configuration and are therefore not available.  If so, can I somehow disable the RAID configuration?  I also tried to install the destination as an external USB drive, but it remained unselectable.  After that a broad error with support Seagate, the only thing that can seem to work is to start from scratch, reinstalling the operating system and from there, something I do not.

  Any suggestion would be appreciated.

  Thank you

  Found the solution!  Splash screens pass so fast that sometimes I can't read them.  Finally, to see the screen that says I had a MBR ERR3.  I ran the restore USB and fixed the MBR.  Now, all the disks are visible.  I want to thank you for your time and your advice with my problem.

  Thank you

• Large symbols for multicolumn Listbox

  I can easily add symbols of 16 x 16 pixels to a multicolumn Listbox, but something bigger seems to be shrunk down to fit these limits.  Is there anyway I can symbols of 32 x 32 pixels for a multicolumn Listbox, and to stay at that size?

  Chris

  Table of the rings pict on top a MCL, with events to scroll (although the code here is pretty quick and dirty).

  There are also some mixed-size fonts in there (you can do with tables and MCLs) and behaviors of mcl are preserved.  I couldn't come up with a very fast way to replace click on icons (in the LFA) with clicks on the items of the listbox, but it can be done.

• cannot select lines in multicolumn listbox

  I want to select a cell (or rather line) should be deleted during execution in a multicolumn Listbox. I activated select entire line and other stuff, yet I can't do - nothing is selected when you click cells. What can I do it wrong?

  

  

  Instead of posting a photo, set your real VI so we can actually play with it to see what happens!

  I guess, you have an indicator when it must contain a control in order to be selectable.