With the exception of all columns in a Table?

Similar Questions

• I lost all the games with the exception of Freecell on my computer

  I lost all the games with the exception of Freecell on my Dell 8200 Windows XP computer. I followed the guidelines to reinstall using Add/Remove Programs, Windows Components and it said: everything is fine, but the games are never as far as I can tell.

  Thoughts?

  original title: games

  I found that I had to delete the games that were not there before I could add them.

• I lost all the file associaation, with the exception of aol, how do I add these files?

  I lost all the file associaation, with the exception of aol, how do I add these files?

  Hello

  1. what happens when you try to open a program?
  2. have you made changes on the computer recently?

  Try the steps listed in the article below and check.
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859

  I hope this helps.

• I just pass the parameters and software my PowerBook has a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install.

  I just upgraded the software and settings, include CC, of my PowerBook for a new Mac Pro. All CC software download is here and work, with the exception of the CC and there is no way to install. I try because whenever I restar keep bothering asking for installation, (by the way, the link is not updated). You will appreciate your help.

  never migrate adobe software.  It must be properly installed.

  Uninstall all the programs of cc you can, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• It seems that most every show on Apple TV is in stereo with the exception of a few films. Is this true?

  It seems that almost all of the shows on Apple TV are in stereo with the exception of a few films. Is this true?

  Most of the TV shows for a few years now, were made with stereo and enough tracks all the movies since the 1980s (and some back to 1955).

• With CVI SQL Toolkit, how to add the new variable param column in a table.

  Dear all:

  I used the CVI Sql toolkit to create a database, but now I don't know how to add a new column to a table in variable param.

  I know, to add a column with the name of constant column could be down by below:

  DBImmediateSQL ((hdbc, "alter table table1 add column1 char [100]");

  But if Column1 is a param variablae how can I write the code? Please advise?  It will be appreciated if you could give me an example.

  Best regards!

  HI -.

  If you look at the parameters that you pass to the SQL function, you can see that the second parameter is a string constant. In your code, you can create an array of characters (string). You can then use sprintf to programmatically determine what will be the contents of this variable. In the function call, you can put the variable instead of the literal string, and you will have a customizable SQL statement.

  Hope this helps-

  John M

• I get the blue screen with the exception of system Service in Windows 8. It seems that many people have of it.

  I get the blue screen with the exception of system Service in Windows 8.  It seems that many people have of it.  I can't use my computer without losing all the data every few minutes.  It is brand new.  Fix?  It often happens with Firefox, but other times too and restarts sometimes when you type an e-mail in the e-mail of Windows 8 program.

  For this recent System_Service_Exception error, if you have an AMD graphics card try the next tool from AMD to try to get the latest graphics driver:

  http://support.AMD.com/us/gpudownload/Windows/pages/auto_detect.aspx

  According to me, a recent update of Windows, maybe the 2778344 which updates win32k.sys to the 6.2.9200.16503 version, could cause a conflict with the AMD graphics driver.

  Many users report the same error recently and so far have all AMD/ATI graphics cards.

  If all goes well the graphic driver update will help.

  If the problem persists, consider uninstalling 2778344.

  Then, at the moment, 'hide' 2778344.

• Erase data with the exception of some members

  I need to erase all the members with the exception of some census... He seems to have gotten it worked but I did not understand why an approach worked and the other didn't. Can someone pls help me understand?
  
  First I tried to use exclude... EndExclude, but it did not work.
  
  DIFFICULTY ("one month", "a scenario",@IDESCENDANTS ("census"))
  EXCLUDE (@CHILDREN ("a country with about 50 members"))
  CLEARBLOCK ALL;
  ENDEXCLUDE
  ENDFIX
  
  Then I tried to use @REMOVE and it does not help too...
  
  FIX ("One month", "A scenario", @IDESCENDANTS ("census"), @REMOVE (@RELATIVE ('World', 0), @LIST (@RELATIVE ('a country', 0)));)
  CLEARBLOCK ALL;
  ENDFIX;
  
  Then I thought that even if the script above does not work, it is not good to use @RELATIVE ('World', 0) since Dim1 has two hierarchies replacing with only shared members. I could just use the stored hierarchy of members and reduce the number of Members returned.
  
  Then I updated the script below and it worked... I'm glad that it worked, but I don't understand why it did not work when I used the world.
  
  DIFFICULTY ("One month", "A scenario", @IDESCENDANTS ("census"), @REMOVE (@RELATIVE ('Memorized the hierarchy of countries', 0), @LIST (@RELATIVE ('a country', 0))))
  CLEARBLOCK ALL;
  ENDFIX
  
  Pls help... Thank you.

  There was a discussion in network54 on erasure when he shared members.

  Cameron Lackpour writes a blog on the same.

  Read http://www.orahyplabs.com/2012/11/share-surpises-in-essbase-part-ii-and.html (this has a link to the post of CL)

  Concerning

  Celvin
  http://www.orahyplabs.com

• Dynamically call DBMS_XMLINDEX to delete the setting and exit with the exception

  Hi all
  
  I am trying to create a procedure to dynamically call DBMS_XMLINDEX.dropparameter.
  If the parameter doesn't exist no then gracefully exit with the exception as "the parameter does not exist.
  But I keep getting errors because of the dynamic passing.
  Procedure is something like:
  
  
  Create PROCEDURE drop_parameter (p_parameter IN VARCHAR2)
  IS
  no_parameter EXCEPTION;
  PRAGMA EXCEPTION_INIT(no_parameter,-12004);
  BEGIN
  RUN IMMEDIATELY ' DBMS_XMLINDEX.dropparameter ("| p_parameter |") ';
  dbms_output.put_line ('abandoned parameter');
  EXCEPTION
  WHEN no_parameter THEN
  dbms_output.put_line ('parameter does not exist');
  END drop_parameter;
  
  For the implementation we can try to create the parameter in the form:
  
  BEGIN
  DBMS_XMLINDEX. () REGISTERPARAMETER
  'Param1 ',.
  ' PATH TABLE PathTB1
  Paths (INCLUDE (/ a/b / c))
  / d/e/f
  ))
  ');
  END;
  /
  
  The setting above should be deleted or if not existing, then exit gracefully.
  Please suggest.
  
  Thank you...

  You test the incorrect error code...

  ORA-12004: http://docs.oracle.com/cd/E11882_01/server.112/e17766/e9858.htm#sthref3299

  Try with ORA-44737, for example:

  SQL> set serveroutput on
  SQL>
  SQL> BEGIN
    2  DBMS_XMLINDEX.REGISTERPARAMETER (
    3  'Param1', 'PATH TABLE PathTB1 PATHS (INCLUDE ( /a/b/c /d/e/f ))');
    4  END;
    5  /
  
  PL/SQL procedure successfully completed
  
  SQL>
  SQL> CREATE PROCEDURE drop_parameter(p_parameter IN VARCHAR2)
    2  IS
    3    no_parameter EXCEPTION;
    4    PRAGMA EXCEPTION_INIT(no_parameter,-44737);
    5  BEGIN
    6    DBMS_XMLINDEX.dropparameter(p_parameter);
    7    dbms_output.put_line('Parameter dropped');
    8  EXCEPTION
    9    WHEN no_parameter THEN
   10        dbms_output.put_line('Parameter does not exist');
   11  END;
   12  /
  
  Procedure created
  
  SQL> exec drop_parameter('Param1');
  
  Parameter dropped
  
  PL/SQL procedure successfully completed
  
  SQL> exec drop_parameter('Param1');
  
  Parameter does not exist
  
  PL/SQL procedure successfully completed
   
  

  (and even once, you do not need code dynamics)

• Boxes (with the exception of the first page of comments) YouTube comments are insensitive/gray. Google have not responded to my request, can advise you please?

  Boxes (with the exception of the first page of comments) YouTube comments are insensitive/gray. Google have not responded to my request, can advise you please? Running Ff in "Safe Mode" makes no difference, or reload the page.
  The URL is just one example, the first series of observations, I can meet next & following I can't.

  Thanks for your help,
  Dick Holman
  [email protected]

  p.s. I can sometimes get the comment boxes to work if I allow third party cookies.

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

• I just upgraded to El Capitan, which automatically "upgraded" iPhoto in Photos.  When I opened the Photos, my thumb nails is blurred with the exception of those that have been published in iPhoto.  This never happened in iPhoto.  How can I fix?

  I just upgraded to El Capitan, which automatically "upgraded" iPhoto in Photos.  Now when I open the pictures, my thumb nails is blurred with the exception of those that have been previously published in iPhotos.  When you click on a fuzzy thumbnail to select it, the picture is very good. The photos were initially imported into iPhoto via the camera memory card to JPEG.  Is there a way to fix this?  I take lots of photos for a local spca and this will really slow me down in the decision-making process on the pictures to use.  I'm not a very tech savvy person any help with this is greatly appreciated!

  If you pick a few and twist and turn then back it is this resolved? -If this is the case you can do in large groups for the problem photos

  LN

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• Upcoming games with Windows 7 will not work on Presario SR1020NX. Upgrade Advisor said that W7 would work with the exception of the Aero

  W7 Upgrade Advisor said it would work with the exception of Windows Aero.  When the games to try to come with W7 get window 'game running in software rendering... '. Hardware acceleration disabled or not supported by the video card driver"games will not work. A check says last drivers are installed.  Tried to reinstall WXP in separeat partition to see if would work like that but will not because most recent W7.

  I suggest that you use XP personally gave a computer which is so old.

  If you have a computer with XP (3 + years) and have not changed at least two of these things (CPU, RAM, video card), you should probably stick with XP. Not worth the headache of praying that things work with a material more old which probably is no longer supported on the new OS.
  Usually, people that the computer was shipped with Vista 1, 2 or less it several years ago can be upgraded to 7 without too much trouble if it was a mid-range machine.

  In addition, it seems that Windows is not recognizing your graphics card. It looks like (http://www99.shopping.com/xPO-Hewlett-Packard-SR1020NX-CEL2-8-512-80-COM-XPH) you have an Intel Extreme graphics card. However, nothing about it is extreme. Since it is an extreme Intel card I guess Windows Update should find the drivers for you, but it is not then maybe the video card is just too outdated for 7? I'm not sure.

  Moreover, I wouldn't worry much about the lack of updates for XP right now. If ever you encounter more money then get the new computer with 7 on it, but at this time I suggest you stay on XP if your hardware and software actually works and that is more important than a few features of 7.

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP