With the help of dynamic objects between documents

Similar Questions

• With the help of dynamically called screw in TestStand deployment

  I write code to interface with a & Rohde Schwarz ZNB Network Analyzer.  I use LabVIEW 8.2 and TestStand 3.5.  For reference the ZNB driver is available here: R & S of ZNB Driver.  I use a slightly older version of the driver, some before they needed to LabVIEW 2009.  I am writing all the code on a development machine that has the full version of TestStand/LabVIEW and it works on another machine that has the TestStand deployment license.

  This driver is dynamically linked to some things he needs.  I am able to operate with simple LabVIEW EXEs but not in TestStand deployments.  The following excerpt comes from their documentation, explaining a little about how the driver works and how to use in LabVIEW EXEs.

  3.4.2 How to generate executables or libraries in LabVIEW driver kernel drivers instrument based on attributes is dynamically bound to any VI performed during execution. This can be recognized by the LabVIEW application builder. The LabVIEW application builder follows all the static dependencies and include them in the package distributed at the generation of an executable file.

  To create an executable in LabVIEW, please manually add all the screws in the \PREFIX \_utility\callbacks folder to the LabVIEW project. In the case of project based please add private to your project folder. With this reference manual, the driver core is included in the compilation and the driver core is accessible during execution.

  I can't get this to work in TestStand deployments at all.  I can't even connect to the device since the VI Init has these issues.  I get the same error for all the various attempts that I made.  The same error is that when you add manually the screws for the LabVIEW EXE.

  Error-1073807346

  Property in Rohde & Schwarz Vector Analyzer.lvlib:rsidr_core_session_fgv.vi-> network node

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_check_error.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute_write_int.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsidr_core_attribute.vi:3->

  Rohde & Schwarz Vector Network Analyzer.lvlib:rsvna.vi:2->

  Example 1 setting of the Instrument 24Default .vi:1->

  Rohde & Schwarz Vector Network Analyzer.lvlib-> efault Instrument Setup.vi

  Rohde & Schwarz Vector Network Analyzer.lvlib:Reset.vi->

  Rohde & Schwarz Vector Network Analyzer.lvlib:Initialize.vi->

  Connection of ZNB testing.VI

  VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  So far, I tried the following, all solutions producing this same error.  I struggled with this and turned off for awhile then maybe there are other solutions attempts I forget.

  (1) it looked like a lot of the report to go to the private folder were finished in SupportVIs.  I manually pasted the rest there, too.

  (2) I added all driver files on my workspace and included in the files with the rest of my deployed screws.

  (3) I added all driver files on my workspace and said pilot TestStand to deploy them to the original location in Program Files.

  Someone at - it ideas?  R & S didn't even know what was TestStand, so that they could not help me.

  I was finally able to solve this problem on mine, the other day.  I brought the Network Analyzer to my office and did a lot of tests in this way.  Eventually, I discovered that I needed to include the folder private pilot deployment, what I was doing in one of previous attempts.  It turns out that you must also maintain the original of this file directory structure when you include it, otherwise dynamic calls are not looking in the right place.  Once it worked on my PC, I got it on the machine test and worked as well.

• With the help of trunc (sysdate) between

  Hello - I have a question about when to use trunc (sysdate).
  
  In particular, I wonder whether or not there are no reason to use trunc (sysdate) in the following statement:
  

  select app_id from app where sysdate between start_date and stop_date

  .. .or start_date and stop_date are stored truncated (not stored in the column time info).
  
  Thank you!

  To some extent, it depends on you want to return. If you ran the query today, and the date of the judgment was 21-sep-2011, would you record back or not? If Yes, then you need to trunc sysdate, given that the component "hour" of stop_date's midnight, and it's almost always after midnight for sysdate (86 399 seconds per day). If this isn't the case, then it is not serious.

  John

• With the help of JavaScript condition in the dynamic action of JQuery selector

  Hi guys,.

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Any advice would be appreciated.

  Chris

  Cashy wrote:

  I have a Setup master detail on a page.

  The detail section, I have a tabular presentation.  One of the fields is a selection list.  The first record in the select contains the value * not * that has a value of primary key for the 1.  I have a distinct region with a simple text field where the user can insert a value into the table if the value does not exist.

  I want than the region of text element to only appear if the value * not listed * is selected.

  I managed to make it work when the value is selected with the help of dynamic action with a bit of JQuery and JavaScript by setting the ID on the selection list to 'create' and have the following in JavaScript $(this.triggeringElement) .val ()! = 1 in the JavaScript for dynamic action condition shows it or hides the region of 'create' and that works well.

  However, if the secondary table is empty before the detail records were created (nothing selected in triggering jQuery Selector) the region of create is displayed when I don't want it.

  I guess I need some sort of NVL in JavaScript condition?

  I use APEX v4.2.

  Simple solution is to hide the region containing the element of text by default, using the style = "" view: no ' in the property of the attributes of the area in the region. " It will be always hidden when the page initially, but its visibility will be controlled by the DA subsequently.

• With the help of registration of dynamic events for a Subvi

  Greetings to the forum LV,

  I'm having a problem with the inclusion of dynamic events in a Subvi and hope someone here can help you! Attached, is the culmination of many attempts to try to understand the inclusion of dynamic events. Basically what I'm trying to do with the screw joint is 1.) have a button that controls output PWM, 2). a speed selection menu that can enter 1 button said.) with an array of pwm values predefined; and finally, 3) to have some sort of event program which "connects" controls in 1). (and 2.) (IE, if I move the button to an exact value shown in the table, the speed selection must match this event). So far, I can say with certainty that the "speed selection" event card will not work because "New value" & "Old value" refer now to the refnum and not the selection of speed control (I intend to solve this problem after I solved this problem of the Subvi). However, the map of event engine speed PWM should work (when matches button among the values in the table, the selected speed will also report the "speed selection" control), which allowed me to reach my conclusion that the Subvi is not working.

  My reference to dynamic Subvi Event Registration: http://digital.ni.com/public.nsf/allkb/A882E27D1D7A949386256E0D0066B91A

  You need to make a different State for 'Timeout' in the Subvi and also avoid passing the value of timeout as -1.

  Find the file code.

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• I'd like to edit a PDF secure document did not change the text, or the layout at all I would do is highlight the text.  How can I do this?  With the help of Adobe Acrobat DC 15.9.20077.160923

  I'd like to edit a PDF secure document did not change the text, or the layout at all I would do is highlight the text.  How can I do this?  With the help of Adobe Acrobat DC 15.9.20077.160923

  You know the password? Otherwise, the security policy does not allow adding comments in the file, then there is nothing you can do about it.

• With the help of Windown 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step by step direcitons, please.  Thank you

  With the help of Windows 10, not all pdf documents launch Adobe Reader DC.  As a result, I have not all normally available printing options.  How can I get Reader to open the default player.  I need to clear, step-by-step instructions, please.  Thank you

  Hello

  Please visit the following link to set the reader as default PDF reader.

  Restoration of Adobe Acrobat Reader in the default PDF Viewer

  Concerning

  Sukrit diallo

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of HP printers in Windows 8

  Windows 8 is the latest operating system produced by Microsoft, Inc.  There are a few differences in the way that you access functions such as printing and scanning from older versions of Windows operating systems.

  Whenever you install a printer in Windows 8, there are a few options to do: complete features in OS driver or driver from Windows Update.  There are similarities between the various drivers, but not everything works the same.

  However, HP has released a document with detailed instructions on the use of HP printers in Windows 8. The document can be found below:

  With the help of HP printers in Windows 8

  Good impression!

  Hope this helps everyone!

• with respect to an application to turn with the help of a global static variable

  Hello. I've read a few articles on JavaFX competition, and as a beginner, so I have to practice on this subject. Now, I'm trying to implement a turn-based application which can be played between 3 to 6 players. Furthermore, I use a scene from a .fxml file and I need to update it properly depends on certain calculations of each thread (in other word players). My main problem is, I don't want to use a while loop that checks the status of similar game;

  While (GameState! = State.GAME_OVER) {}

  currentPlayer = GameBoard.getNextPlayer ();

  perform certain actions, calculations, etc.

  }

  So, I want to use threads to work instead while loop. I guess only with the help of the Service used to iterate class and assign the next player will be adapted to instead of using the while loop and the tasks for the calculation of each player, or waiting for a few responses of human players on the UI account, however, I am faced with two problems.

  1. It has a global static variable (like the GameState which is an Enumarator) determines the State of the game, so it should be updated and must be verified by each round. Is it possible to do this?
  2. How can I get rid off this while loop?

  I would like for each answer. Thanks anyway.

  It shouldn't make too much difference. The basic idea is that you have a model class that represents your state of the game (the class of game in example jsmith). When a player makes a move, you update the game state. Because this will result in changes to the user interface, this update must be performed on the Thread of the FX Application.

  If the player makes the passage is a human player, the move would be done by a user action (mouse click or press button, etc.); This will be handled on the FX Application thread in any case.

  When the State of the game changes so it is in an "artificial" player's turn to move, have the object representing the artificial player calculate his next move and then update the game state. Since it is a response to the evolution of the game state (it is the artificial player's turn), it will also be on the Thread of the FX Application.

  The only (slight) complexity comes if the calculation of displacement for the artificial player takes a long time. You don't want to perform this calculation of long duration on the Thread of the FX Application. To handle this, the cleaner is to start a task that computes the desired pass and then updates the status of the game when travel is ready. So, something like this:

  GameState game = ... ;
  // UI is bound to the game state.
  ExecutorService executorService = ... ;
  // ...
  
  final Player currentPlayer = game.getCurrentPlayer() ;
  final Task calculateMoveTask = new Task() {
       @Override
       public Move call() {
            Move move = // compute next move...
            return move ;
       }
  };
  
  calculateMoveTask.setOnSucceeded(new EventHandler() {
       @Override
       public void handle(WorkerStateEvent event) {
            gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
       }
  });
  
  executorService.submit(calculateMoveTask);
  

  If you make a thread more than that, you're probably do badly... Also, there should be no need anything it either, will be held in a "global" static variable (the idea above is the only structural change you the example posted by jsmith).

• get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Question
  get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?

  Ah, quite understand now that I added to my doc html

  < style type = "text/css" >
  {body
  background-color: #FFF;
  }
  "'object {outline: none ;}"} '

  < / style >

• With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM

  I can't use by net cooking system indicates error java and java download does not work with my system with windows 7 giant premium 64 bit computer laptop.

  REPRT ERROR:

  Java plug-in 10.7.2.11
  With the help of 1.7.0_07 - b11 version JRE Java hotspot Client VM
  Home Directory user = C:\Users/
  ----------------------------------------------------
  c: clear console window
  f: finalize objects on the finalization queue
  g: garbage collection
  h: display this help message
  l: dump classloader list
  m: print memory usage
  o: trigger logging
  q: Hide console
  r: reload the policy configuration
  s: dump system and deployment properties
  t: dump thread list
  v: dump thread stack
  x: delete the cache of class loaders
  0-5: set the trace level

  Hello

  1 are you facing this problem with a specific Web site?
  2 are you having the same problem on other browsers as well?
  Please follow the links below to solve the problem.
  Method 1
  How to troubleshoot script errors in Internet Explorer
  http://support.Microsoft.com/kb/308260
  Note: follow the steps as troubleshooting applies to JAVA issues.
  Step 2
  How to enable Java in my web browser?
  http://www.Java.com/en/download/help/enable_browser.XML
  Method 2
  If you still face problems, please uninstall and reinstall JAVA
  Remove all traces of the failure of the Java installation by uninstalling Java:
  
  http://www.Java.com/en/download/help/uninstall_java.XML
  Install Java
  http://www.Java.com/en/download/index.jsp
  I hope this helps.

• OEBS 12.1.3 purchase request for approval Notification - SOUL with the help of approvals.

  1. We discovered that the version of the SOUL of this notification is generated via a framework of OA.
  2. We have a requirement for the company to add details of the additional topics to the part of the notification.  These fields are not standard for objects of view OA executives Business so an extension of necessary view.
  3. With the help of this and other sites, I was able to extend the view object in the favorite jDeveloper IDE and transfer it to my development OEBS instance.
  4. I see my view extended on the OFA Page, when you look at the content of 'About' from the page.

  My problem is when I try to 'Customize' and add a column of extended view, errors Page OAF that I am trying to come back since the customization session.

  I joined "Personalization_Error_when_adding_new_column_from_OA_Extended_view_object.docx" detailing what I try to run.

  Support of Oracle said that extension of the view OFA is considered a "customization" and that he does not want to help.

  Can anyone advise on what I should look at to solve this error?

  Any feedback/assistance would be greatly appreciated.

  Best regards

  Rich

  The View attribute is referred to as "LAST_UPDATE_DATE". If this is what we call in the SQL query, the attribute of the view object might be different like "LastUpdateDate". Please check back in the XXVO.xml.

  If that has not solved the problem, its running diagnostics by activating the option FND:Diagnostics profile. Then you will get the link 'click here' link on the error page to get the error stack. You can stick the stack of error here.

  Thank you