Similar Questions

• Hi, I have a problem with the download trial version of adobe after effect cc. When I want to download instad of download there are massage: we are experiencing some problems, please try again later. If the problem persists, contact customer support

  Hi, I have a problem with the download trial version of adobe after effects cc. When I want to download instad of download there are massage: we are experiencing some problems, please try again later. If the problem persists, contact customer support. What seems to be a problem? Thank you

  Please try after effects configuration required for Mac OS and Windows

  Concerning

• The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  The Nvidia GTX 970 works with the gpu acceleration in first pro / after effects.

  I want to know as I suppose it would be, but it is not in the configuration required for the cuda acceleration.

  Yes, he does. I have the 980 and it works very well also.

• With the help of function "Edit in" after the upgrade to 4.4 LR

  Hi all

  I upgraded to 4.4 today and when I tried to use the function "change in" on a photo of a move to 10 items, I received a message that LR has been unable to prepare the file selected for editting and it won't open.  I tried several photos and none of them work.  Also, I went into preferences and put in place the item editor as my external program.  It worked this morning before the upgrade.  Any ideas?

  To the OP, it is a kind of problem of permissions with the external hard drive for sure. Run repair permissions in disk utility and check the permissions to get information for the reader.

  Xda... the Edit function has always worked with PS or PSE depending on your configuration.

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Do not launch Lightroom, right after the start screen. With the help of lightroom6 on Win 8.1.  Installed and worked for a week.

  Lightroom does not start, gets stack after the splash screen.

  With the help of lightroom6 on Win 8.1.

  Installed and worked for about a week, before it happened.

  David

  Hi assani

  Now it's working.

  After the restart I have asked me to update to lightroom, which I did.

  Now it's working.

  Thanks again, David

• Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  Need help to understand why my downloaded PDF doc displays "Please wait...". If this message is not finally replaced with the appropriate content... "after that I have already downloaded the version update for windows 10

  This is because the PDF file is not be open in Acrobat or Reader, but by the browser which is unable to handle the specific PDF content.

  If you use Firefox or Chrome, follow these steps: https://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• ow change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4

  With the help of Mac 'Pages '.

  A typing mistake?

  If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window

  These are detailed in the help topics of pictures - a good place to look for help on the Photos

  View and add information about the photos

  You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.

  Open pictures for me

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  Show titles, other metadata and badges

  Change the date and time of photo

  You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.

  1. Select the photos you want to edit.
  2. Choose Image > adjust Date and time.
  3. Enter the date and time you want in the modified field.
  4. Click a time zone on the map, if necessary.
  5. Click on adjust.

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of semaphore with a Global Variable - correct use?

  Hi all

  I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

  In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

  A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

  I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

  Thanks for any help!

  CelerityEDS wrote:

  The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

  ??

  Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

  Have you tried in your point culminating execution of the VI in order to see how they are actually running?

  Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

  I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.