With the help of the mouse click to return the coordinates of the image.

Similar Questions

• What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images?

  What kind of image is in a document. INDD so when the file is opened you get the message 'document contains 6 links to sources that are missing' and when you click OK to recreate a link to missing files, the document opens with the images? Missing images are not on my computer, but when the document opens the images are there. I can copy and paste the INDD images in Illustrator. Y files/images/I am able to copy and paste the images that have been incorporated into the INDD file in AI of the INDD file? If this is not what type of image am I copy and paste? Can I take the images that I stuck in there and place them in a new INDD document and have the images to reproduce without problems?

  The images could be anything - check the links Panel.

  What you see (and copy) is just the screen preview, not the actual image data.

• Still struggling with the Image and paper formats

  I use LR 5 on a Mac, and printing to a Canon Pro-100.  I have grown my image to 8 1/2 x 11.  In Page layout, I've selected 8 1/2 x 11 as my paper size and uses Board single image/contact for the page layout.  The smaller margins he will allow me are L, top, bottom =.25 and right =. 56.  The maximum size of the cells is 8,00 x 10.19.  I would like to fill the whole 8 1/2 x 11 paper with the image moins.25 inch border all around.  What I am doing wrong?

  Thanks for your help.

  My thanks to all who responded.  Very much appreciated.  I thought I had covered all the bases, but the problem is in the part of the Page Setup from LR.  Somehow the border right side had been incorrectly set.  I changed it a.25 and all is well.

  Happy holidays to all.

  Ken

• Is it possible to make a reflection of the image that will change with the image? [was: reflection]

  Is it possible to make a reflection of the image that will change with the image?

  

  I believe that a dynamic object will solve your problem.

  Place your original image to a new file as a smart object and do the same for reflection (made by processing, reducing the opacity and introduce a slight blur horizontal) on its own layer, then:

  by double clicking on the smart object in the layers panel and return to the original image, any change in the original and save, automatically update the vertical image and its reflection.

• "Draw the fate-in" function fills the erroneous part of the text with the image.  How to reverse?

  Hi there and thanks for the help in advance!

  I used a font called "postcard from holidays NF.  (Police of holiday card mailing NF by Nick Fonts - FontSpace)

  I'm trying to put an image in the white part of the police, but when I use the function "match zero" and place the image, it fills in the black part of the police instead, that I would stay black.

  How to choose the other portion of the police (white part) to be filled with the image?

  Here is an example of what happens.  Thanks again!

  

  For a policy like that, you will need to separate forms of letter (white) from their shadows. It will, therefore, describe the type and transparent records release.

  A new compound of all the white letters and use it as a clipping mask.

• failure to communicate with the image drum?

  My m175nw is only 2 weeks... Everything worked great until I did the Firmware update.  Now, I get the following error and I think I printed only one (1) page since I bought this thing

  10.0004 power error
  10.1004 supply memory error

  There is a failure to communicate with the imaging drum.

  The update of the firmware was "2012-08-27, Version: 20120806, 10.28 M" and the error message

  10.0004 power error
  10.1004 supply memory error

  is the display on the printer control panel.   I was running Windows 7 (64 bit) at the time of installation, but I also have a system dual boot and can run MAC EVALUATE which the same message after restarting the printer.  Even with the computer turned off the M175nw displays the same error message.  As stated earlier, the printer is only 2 weeks, I think that I've printed 2 pages (with no problems) and the above-mentioned error did not appear after the update of the Firmware... I tried a reset to the default settings, but unfortunately that has no effect when the firmware has been updated.

• My tags and labels will remain with the images when I move them to a new computer?

  I want to assure you that if I take the time to enter the tags and labels for my images, these data will move with the images of my next computer.

  Hello

  I would ask you to view the query in the forum of photo gallery for more assistance.

  Reference:

  http://answers.Microsoft.com/en-us/windowslive/Forum/Gallery

  Thank you.

• Help with the images to be copied

  Hello

  Thank you to spend some time to help me with this problem. IM new in the Flash world

  I'm actually designing a website and need to copy images from one page to another. The problem is that after pasting images in another place I don't seem to be able to change it without going through the change in original frame. Is there anyway I can copy images (animation, buttons etc.) and still be able to edit them without going through the change of original?

  My intention is that both have multiple pages with the same basic design but the slight modification on each page.

  Thank you

  You can change the objects in the images pasted regardless of the originals.  But if you double-click or otherwise go objects 'timeline', will you change all instances of that object, including the (s) on the original images.

  to remedy this, create duplicate objects and use the properties panel to switch the original copied with duplicates.  You can then change the duplicates without editing the original.

• Lose a part of the image with the image (for plotter output) object help please... need to file for a job.

  Hey guys I'm trying out a file I cut on a plotter. If I watch it 'tracks' mode everything looks good. All the lines are there. If I try and import it into the scalp, he gets all wacked. I had a problem like this once before and I used "expand" in artificial intelligence for him to correct. On this issue when I use 'develop' part of the image disappears (same part that cannot be sen in the tracer software). How can I fix it? "expand appearance" is grayed in HAVE with this file too. Man, I spent a lot of time to get this file done and now it does nothing for me. Thanks in advance.

  [ [URL =http://s283.photobucket.com/user/IPTalaska/media/Airbrushing%20forums/Logo-mishap_zpsf2662 e11.jpg.html] [IMG] http://i283.photobucket.com/albums/kk319/IPTalaska/Airbrushing%20forums/ Logo-mishap_zpsf2662e11.jpg[/IMG][/URL]

  [ [URL =http://s283.photobucket.com/user/IPTalaska/media/Airbrushing%20forums/Logo-mishap-2_zpsf56 dfd30.jpg.html] [IMG] http://i283.photobucket.com/albums/kk319/IPTalaska/Airbrushing%20forum s/Logo-mishap-2_zpsf56dfd30.jpg[/IMG][/URL]

  in case someone else stumbles across this thread, it turns out that it was due to the use of live paint. Once I got it worked (mostly).

• Boot camp Win 7 0 x 34 blue screen during windows startup after the restoration with the image of the system.

  The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.

  Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with

  AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.

  Here is the link to the complete analysis of the dmp for details file:

  https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu

  Thank you very much in advance for your help

  Moschtermeedchen

  AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.

• During a flight over an image of a Web page, the URL associated with the image opens at the bottom of the browser. I don't want this information to appear whenever I have my cursor on a picture of the Web page. How to disable this option?

  The pop-up window appears in the bottom left of the browser Firefox. Yet once, it displays the URL by clicking on the image for each image on the Web page.

  The easiest way is to use the add-on of status-4-Evar. With it, you can choose to not display the messages State or hover URL preview, or rather display them in the bar modules or the address bar.

  https://addons.Mozilla.org/firefox/addon/status-4-EVAR

• List of laptops that compatible with the images of windows 8.1 and 10 HP.

  Hello

  I need to find a list of laptop computers that are compatible with the v10 and Windows v8.1. The operating system will be installed from origial HP image.

  Could you please help me to know suh list?

  Kind regards

  Emil

  Hello

  Even if such a list is available, I'm afraid that you do not publicly.

  Most or all out last year 1 HP computers are compatible Windows 10

  Most or all computers HP published between late 2012 and between summer 2015 are compatible in Windows 8

  Class specifications business most released in the past recent years can run Windows 7, 8, 10 and ~ ~ Linux [I mean backward compatibility, compatibility certainly not ahead]

  If you have a specific questions. specific HP models, do not hesitate to post.

  I hope this helps.

• How to print the date at which the image was taken with the image?

  De : Carol

  Message: I have a Hp Photosmart printer and Windows Photo Gallery.  I need the date that the photo was taken printed on the image for a legal reason.  How to do this.  I can get the image on the screen with the date, but it does not print.

  Thanks to anyone who can help me.  Carol

  De : John Inzer

  The following free software might be worth a try.

  FastStone Image Viewer

  http://www.FastStone.org/FSViewerDetail.htm

  "The basic steps to add dates to image files using Fast Stone Image Viewer"

  (You will need to experiment with the position, the size of font, color, and different Variables to achieve

  the desired result).

  Tools / Batch convert / Batch Convert tab...

  Check the box... Use of advanced options...

  Advanced Options button / tab text / check... Use the text...

  Open the window drop... "Insert a Variable" choose... EXIF DateTime / Date and time... Ok...

  Add the files you want to add...

  Choose an output Format...

  Choose an output folder...

  John Inzer

  Digital Media MVP

  View

  This isn't a technical support

  I'm a volunteer

  Solutions that work for

  me I work for you

  Proceed at your own risk

  Another response of the community of Windows Vista discussion groups

• How to create a recovery with the Image of the DVD of Windows 7 Partition?

  My laptop got screwed that I started a month on vacation and no DVD of Windows 7 with me. I think that the best solution would be a partition with a bootable Windows 7 DVD image.

  Any suggestions on how to make a? -Nigel M

  Make a Windows 7 image and store it on a separate partition

  1. create a partition large enough to store an image of your Windows 7 installation
  2 make a Windows 7 image and save the image on this partition
  3. with the program allowing you to make the image to burn it to a bootable recovery CD Imaging
  4. If you need to restore the image, insert the CD to boot and start the restore process.

  Create a System Image in Windows 7

  After you install and activate Windows 7 create a system image as a backup of your current computer in case you need to reinstall it. That will save you the trouble of having to reinstall Windows 7 and installed everything currently again, and it takes much less time to do.

  1. click on the Start Menu and type "Save", and then click Backup of your files.
  2. in the Control Panel window that appears, click the blue link to the image.
  3 create a system image window should pop up.  Select which hard disk, DVD, or network location, you'll save your image.  Click next to continue.
  4. on the next page, check disks in your system and your system for.  Once you have selected the drives, click next to continue. Note: You can select as many records as you want (if available), but you choose to include means to the greater will be the size of the image.
  5. the next window is just a review, make sure everything is correct, and then click Start backup to start the process.  It may take 10 minutes or more, so patience is needed.
  6. once the backup is complete, you? He's prompted with the option to create a system repair disc.  It's a good idea, just in case your system has problems in the future.  Click Yes.
  7 choose which disc recording drive you? He's use to burn the disc.  Insert a CD or a blank DVD for the physical disk, and then click on create disc.

  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  You can also use a disk imaging hard program - they both allow you to create a rescue disk.

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Windows 7: create a Partition of Installation of system to install Windows (I nstallation Partition, not an image)
   
  (1) create a partiton of 3.5 GB at the beginning of the hard drive, then the rest of the hard disk you want to partition.
   
  (2) copy the whole DVD on this 3.5 GB partition and make the partition bootable.
   
  Open the command prompt and run the following:
   
  x:
   
  CD/Boot
   
  x:\boot\bootsect/nt60 x:
   
  (where x is your score)
   
  A message "startup code has been updated on all targeted volumes" should appear.
  Then, verify that the partition is marked "active" in disk management.
  If necessary, right-click on the partition and 'mark the partition as active.
   
  (3) upon reboot of the PC will automatically launch the partition setup and add an entry 'Windows setup' in the BCD entries. If this is not the case, change the boot with EasyBCD menu. http://NeoSmart.NET/DL.php?id=1

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Problem with the images of the opening of the Laibrary mode in lrm?

  When I try to open a picture from the library feature and click on the image, load logo lights up and it will take a few seconds for the image to appear.  What can I do for the image to appear instanetaneously without taking a few seconds to loaod.  Back, this has something to do with preview (standard) rendering?  If I hit the preview made under library function and then click rendering all standard previews will be the correct loading image problem. Note that I 52,00 images in my catalog. I tested it this morning and a few images will be open without loading and others will be open upwards and take 5 seconds or more. Whats tdhe solution?  Thank you!!

  The problem is in the library in the grid view module when I open a single image, some of them will load instantly and others will take several seconds to load up to 4 to 6 seconds or more. The develop module works very well. The sliders etc work ok. Thank you!

  It would have already been said above, but this is usually caused by the right size preview is only not available for images or preview being obsolete. In this case, Lightroom must return from the raw file image and who will have a few seconds, especially older hardware. You must also make sure that your standard preview size is large enough for the screen that you use. It is set in the catalog settings-> files management. In Lightroom 5, you must make sure that the standard preview size is greater than the longest dimension of your screen. In Lightroom 6/2015, the trick is to set the size of 'Auto '.