With the help of VB6 GPIB in Windows 7

Similar Questions

• With the help of HP printers in Windows 8

  Windows 8 is the latest operating system produced by Microsoft, Inc.  There are a few differences in the way that you access functions such as printing and scanning from older versions of Windows operating systems.

  Whenever you install a printer in Windows 8, there are a few options to do: complete features in OS driver or driver from Windows Update.  There are similarities between the various drivers, but not everything works the same.

  However, HP has released a document with detailed instructions on the use of HP printers in Windows 8. The document can be found below:

  With the help of HP printers in Windows 8

  Good impression!

  Hope this helps everyone!

• With the help of two GPIB-ENET/100 boxes with ibconf - gpib1 selection?

  I hope this is the right forum for this post.

  I'm trying to use ibconf on Solaris to configure a workstation to use 2 boxes GPIB-ENET/100.  I have never tried to configure a computer to use multiple boxes GPIB-ENET/100 at the time, so I don't have a lot of confidence that I'm doing it correctly for two boxes.  Especially given what I describe below.

  According to the manual page 4-2 of the "Getting started with your GPIB-ENET/100 and NOR-488.» 2 for Solaris. "

  To identify your GPIB-ENET/100 in ibconf, perform the following steps:
  1. press on to select the option rename.
  2. type the alias name of host, host name, or IP address assigned to your
  GPIB-ENET/100 and press .
  3. press to exit, chooose to save your changes.

  I followed these steps for both boxes, but the banner at the top of the menu always says 'Card device for Council gpib0' and he always says "gpib0" just to top the host name that I go.  Shouldn't he State gpib0 first Board and gpib1 of the Committee on the second?  But I don't see a way to move to gpib1, or the unit of the second box ("Board") map.  Instead, it seems that I crushed the entrance of host name for the first box, I've identified using the steps above with the host name of the second box, that I've identified by following the steps above.

  I looked through the manual as well as fact a search online, nothing helps.  Which brings me to this forum.

  How should we do to get the pilot configured to use the GPIB-ENET/100 boxes?

  Thanks in advance.  Out of my ibconf is below (that's what it actually looks like, either incidentally - the strange on the line with dev2, dev13, and dev24 is not an artifact of copy/paste):

  ===============================================================================
  National Instruments GPIB Software Configuration utility Rev A.3.
  Copyright (c) 1991 National Instruments Corp.   All rights reserved.
  ===============================================================================

  File: / etc/gpibrc = CAPACITY: 8-plank 44 devices =
  ----------         -----------
  Press a key to continue * -.
  -----------------  -------
  ----------------  ----
  

  -------
  ----

  ===============================================================================
  National Instruments |    Card device for Council SPARCstation gpib0
  ===============================================================================
  -----------
  | GPIB0 |
  ----| nienetD |
  |   |_________|     * Use the cursor keys h, j, k, l & to select a device or a Commission.
  |                   * Use the buttons below to select the desired action.
  =====|------------------=======================================================
  | - 0 dev1 |-dev12 0 1 dev23 2 dev34
  = | - dev2 0 = = |-ev13 = 1 dev24 = 2 = dev35
  | - dev3 0 0 |---4 1 dev25 2 dev36
  | - dev4 0 1 dev15 1 dev26 2 dev37
  | - 0 dev5 1 dev16 1 dev27 2 dev38
  | - 0 dev6 1 dev17 1 dev28 2 dev39
  | - 0 dev7 1 dev18 2 dev29 2 dev40
  |---0 dev8            1 dev19           2 dev30                                                                   2 dev41
  | - 0 1 dev20 dev31 2 dev42 dev9 2 |-0 1 dev21 2 dev32 dev10
  | - 1 dev22 2 dev33 dev4311
  3 dev44
  |

  ^ Q: help ^ r: Rename ^ T: (de) connect ^ edit I: ^ o: output

  I just thought of it. My terminal has been updated with the ansi format. That was streaked the menu and blocks my view of the operating instructions ^ B / ^ F to see maps for more tips. The dockers affecting my vt100 terminal. You can even see how my menu was watered to the top at the bottom of my original message. I didn't know until now that the menu was supposed to look like different (although I knew it).

• With the help of HP Support Assistant (Windows 8)

  Hey guys,.

  I know that some of you are new to Windows 8. I want to remind you that windows 8 has the same function (HP Support Assistant) your laptop last was if you own one.

  If you don't that is fine I'll show you what I mean

  HP Support Assistant is a software designed to help you keep your computer in working condition, prevent potential problems occur and resolve problems quickly and easily. The program also provides information valuable system you need for troubleshooting computer problems.

  

  In SA HP (Support Assistant), you can:

  • Access to your user's Guide for the laptop.
  • Run updates and the updates
  • To connect to the Internet
  • It gives you the # to Contact the Technical Support
  • Test of your Audio and Video
  • Test of the battery and performance of your laptop
  • Make a diagnosis of your problem of hard disk, optical drive and network .
  • You can start a Backup and recovery by here.
  • Connect your new Printers and Accessories also by support Assistant.

  

  This DOCUMENT describes how to use the HP Support Assistant software to learn more about your computer and keep it running smoothly.

  Guys please enjoy this feature. It will be useful.

  THX

  Hope it will be useful.

  THX

• With the help of VWmare on my Windows 10 machine & I need an OEM Windows 7 Ultima Pro 64 bits for Xilinx Vicado to run

  I am development engineer and my material design of Xilinx Vicado package will not work in the new Windows 10. I said that he can not find running libraries etc.. They use batch to determine if the directories exist etc. Well, I've spent big buck to get the latest version of VMware. I install my OEM of Windows 7 Ultra Pro 64 bit version and install the key software must work. So after you have installed, the activation of my key does not work. I made several suggestions, but it is not supported anymore. Yes big problem so it is not supported, I understand that I watch the news and reading materials. I use Microsoft products since the first Windows 286 and spent a lot of money using your products. So Microsoft is going to fuck me a disable us marine veteran? After paying my bills every month I $168 to feed my son and myself. I may as well cancel all subscriptions and eat food, but I'm 65 years old and that I have to keep my mind active but a brain injury, broken back and I might as well jump off a cliff, but I love my child and myself. So tell me how are you going to fuck me.

  James Wm Hussey

  E-mail address is removed from the privacy *.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W10 '

  Hope this information is useful.

• With the help of a keyboard of Windows on a Mac to work remotely

  Hi, I use desktop connection remote on my Macbook Pro to access my computer for working remotely. My work computer is a PC running Microsoft Office. I would like to be able to connect a windows on my Mac keyboard and use Microsoft Excel exactly how I would be at work. I am trained on a keyboard windows with excel and find it difficult to constantly go back. Can someone please?

  A Windows keyboard will not work on a Mac.

• mismatch icon in the upper left corner of the thumbnail in the Organizer. With the help of 14 elements on windows 10. what it means?

  I have an "icon of mismatch in the upper left corner of the thumbnail in the Organizer. I use 14 elements on windows 10.  What does mean, how can I get rid of him. Should not be there. I'm looking to take pictures without a beacon when it arrives?

  No match icon when you view the result of a search is here to tell you that a particular element in a stack or a version does not match the search criteria, while the other batteries/versions correspond. For example, they have not the same classification by stars or tags.

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  I have no experience with Windows Calendar, but see this article for a bit of luck:

  Customize Windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows 7 will not be activated. With the help of a legitimate license key.

  Windows 7 will not activate... With the help of a legitimate license key.

  Have you tried to activate by phone?

  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  After I open a document using Adobe reader DC and want to save it with the help of Save as when I try to open this operation all I get is an empty windo saying save as. This problem just started, note I'm on Windows 7 Prof

  Hi sgodwin2468,

  Make sure that Acrobat Reader DC is updated Release Notes | Adobe Acrobat, Reader.

  If the problem persists, try the solution below.

  The default "save under" Acrobat/Reader DC dialog box is different from the dialogue box you had in earlier versions of Acrobat/Reader, it also allows you to record in the clouds and previous locations that you saved the files. It is possible that when Acrobat/Reader tries to connect to the 'cloud', it runs into problems. You can try to disable this feature to see if this brings your backup in the back of the box: open Acrobat Preferences, then go to the "General" category and uncheck "show the online storage when you save files:

  

  Kind regards

  Nicos

• Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Just installed LR6. It opens with a window that says select a catalog. There is nothing to select. With the help of windows 10

  Hey Billo,

  Could you please let me know, if you are able to see an option to "Create a new catalog" on the lower left corner of the window.

  Also, if possible, could you please attach a screenshot of the window that you see.

  Kind regards

  Tanuj