Similar Questions

• LabVIEW and TestStand compatibility chart

  Hello

  There are various compatibility tables LabVIEW NOR as this Web site but it seems not to be a LabVIEW and TestStand compatibility chart.

  I think I found my answers, but I had to get through all the Notes version of TestStand to get.

  Hi Ray,

  The lists of the political of TestStand page on the different version of TestStand compatibility with:

  • Operating systems
  • LabVIEW
  • LabWindows/CVI

  (In addition to information about the cycle of life and support policy)

  Specifically, here's a screenshot of LabVIEW support:

  

  With each new version of TestStand, we will update the policy life cycle page, so you can always go for information.

• HP Pavilion DM3 1100: HP DM3 1100 hybrid series and Windows 10 compatibility chart

  Hello!

  I am running W7HP x 64 on my DM3 of Pavilion with hybrid graphic system (Mobile Intel 4 series) and GeForce G105M. I'm worried because I'm not sure that the hybrid function works - which means that it will pass graphics cards according to the source of power and power management.

  Can anyone confirm that the hybrid function works or is there any other app/trick/hack that I can use? I need discrete and integrated graphics to work when I'm connected to working with graphics applications (editing photo or 3D modeling light).

  1 million thanks!

  Scratch higher response! I did the job! I downloaded driver win 7, began the installation so that the files were extracted to the SWSETUP folder, leave the installation to finish in normal mode (no compatibility mode). At this point, there is no difference. Then I restarted my laptop and opened Device Manager and updated the driver manually selecting the inf file in the subfolder SWSETUP. I then did a bit of fiddling around with deactivation and activation of integrated graphics card Intel and all of a sudden, the LED TV light on and there was the desk! Although the resolution was not standard full HD, but something more small to 1680 x 1050. Disconnect and reconnect the HDMI Cable causes the actions required, which means that the laptop screen turns on and turns off properly.

  I hope it'll work with my desktop LCD screen to... :/ Will report!

• Buy a new battery for Pavilion dv4. Confirming the compatibility of battery KS526AA.

  I ran a diagnostic battery last night after that I had trouble keeping my battery charged. It must be replaced. I think I found the battery on Amazon: it's a KS526AA. I found the battery on the HP Web site as well, but this product does not list what laptops, it is compatible with. I know the standard dv4 is a KS524AA, but I wouldn't mind the extended battery, just as long as it works.

  Does anyone know phones compatible for the KS526AA or that the batteries are compatible with a Pavilion dv4?

  Thank you!

  It depends on the specific dv4 series you are referring. Here is the battery compatibility chart: http://www.shopping.hp.com/shopping/pdf/HP_NB_Battery_Compatibility_Chart.pdf

• Compatibility of Virtual Center

  With VC 2.x can also manage ESX/ESXi 4 guests?

  And with VC 4.x can manage ESX/ESXi 3 guests?

  Max

  With VC 2.x can also manage ESX/ESXi 4 guests?

  Is not possible... you must VC4 manage ESX 4.

  And with VC 4.x can manage ESX/ESXi 3 guests?

  Yes, it is possible.

  See also the VMware vSphere (http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf) compatibility charts

  André

• What disk SSD can I use in Qosmio X 500

  I want to install (approx. 128G) SSD drive in my Toshiba X 500, it has an Intel PM55 chipset.
  What SSD you recommended to me or where I can find the list of SSD compatibility for it?

  Thank you!

  Hello

  To my knowledge, there is no a compatibility chart.
  The laptop supports the interface and common SATA controller.
  So you can use any 2.5 SATA SSD drive
  It should be compatible in some cases the drive manufacturers SSD also provides an update of the firmware if a compatibility issue would appear.

• Each cycle of operation of 5 I get error 50405

  Dear,

  I am trying to solve this problem for the last month, it make me crazy every day.
  I posted the same post ago last month and I got the answer from the experts OR, that its the problem of leting the vi running for only 5 cycle (previously showed only after 2 cycle), after the 5-cycle the error appear again.

  More information link

  I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Here's my vi updated seal and some information, hope someone can help you resolve this error.

  Thanks for your support and help Lynn.

  Hi MESHA'AL,.

  Error-50405 is normally related to an error in communication between your device and your computer. I suggest updating your DAQmx driver to the most recent who will support your version of LabVIEW. See the compatibility chart for more details.

  I also suggest upgrading your computers USB drivers and try the different USB ports, hubs and even the cable if you have another.

  If possible, try to run your program on another computer to see if you can reproduce the behavior on another system.

  Finally, if the presists of the error, try to run some of the sample code provided with LabVIEW so we can narrow this down to a problem with your code. At this point I'm leaning more towards a driver/hardware however problem.

• NEITHER PCI PCI-6025E 1409

  Hi friends,

  I NI PCI 1409 (image interface) and PCI-6025E cards (DAQ) installed on the windows xp desktop

  which connected to Mikron deducted camera (M9104).

  Recently, I have through my labview 8.6.

  After the upgrade, the installation of Mikron camera software has failed.

  Anyone have an experience to solve the problem?

  Any suggestions are highly appreciated.

  Thank you

  Jack

  Hi jackp6,

  I think that your problem is related to the drivers.  After the upgrade to LabVIEW 8.6 have improved your NOR-IMAQ drivers as well?  According to our IMAQ and IMAQdx compatibility chart , you must have version 4.1 or higher for NI-IMAQ and 3.2 or higher for NI-IMAQdx.  I suggest a complete reinstallation of our acquisition of Vision with these drivers software.

  Lynn

• 9402 internal counters/timers?

  Hello

  The NI 9402 has an internal counter/timer?

  The description of the product on the web page says that's, however the manual so that it does not mention a counter/timer.

  Other web searches only refer to a counter/timer, when it is installed in a chassis.

  If not, can anyone recommend a USB DAQ for monitor 4 streams (5V, up to 100 kHz) pulse rate?

  Thank you

  Erik

  Hi Erik,

  The documentation is a bit difficult - the important thing to note is that the 9402 cannot be used with a USB socket: NI C Series Module compatibility chart. I recommend to visit the DAQ homepage and search by bus and meter number. It seems to me that you can possibly use USB 6501 which has 24 DIO lines, 1 counter and can read in at a rate of up to 5 MHz (and it is a mere $99).  If you need a little more which is always close to your price range, you can upgrade to the swankier USB 6210.  Hope that helps!

• I can't install the driver OR RIO in my cRIO use MAX 5.5

  I can connect it assign a static IP address. Whenever I try to install the software in the FPGA target, appears the following error message:

  "Timed out while communicating with the remote server. Ensure that the system is online.

  What can I do?

  I have LabVIEW 2013 installed in WINDOWS 8

  Hi Vitrion,

  As seen in the Service request, this problem was resolved when you demoted to LabView 2012 and reinstalling Max5.5, so we can properly install the Driver NOR-Rio and sees the device to the Max apparently, it was a compatibility issue in versions...

  Just a recommendation for a few cases like this. Please check the compatibility chart before installing an update of LabView in order to have the right version of Driver OR-Rio.

  http://digital.NI.com/public.nsf/allkb/577CC9A7DCFC73DF8625738400116CC3

  Kind regards

• LabVIEW 6.1 and 2012 at the same computer problem

  Hello world.

  I've been using Labview 6.1 for a while and it worked fine for me.

  I recently installed Labview 2012 on the same computer and looks like the serial port of functions do not work properly. Whenever I try to open an example of VISA communication, labview freezes.

  I guess it's because even though I can install two versions of labview in the same computer, the drivers can be installed once correct?

  But I thought that labview 6.1 and 2012 may share the same VISA driver.

  Is there a way I can resolve this problem with versions of labview works correctly?

  Thanks in advanc.

  The LabVIEW and VISA compatibility chart is here. As you can see, there is no version of NI-VISA which is compatible with the two 2012 and your old 6.1. Indeed, the graphic poster not only any version of older than 7.1.1 LabvIEW.

• Vision 2010 missing IMAQ USB

  I was unable to run examples or software by using all of the IMAQ USB files. I tried to repair my installation of IMAQdx and always get the same thing. When the file is loaded, my computer search IMAQ USB Grab acquire and can't find it. I want to use a USB webcam to capture an image and then treat. Here's what I use

  LV: 2010 with Embedded for ARM

  Vision: 2010

  See the compatibility chart provided in this link:

  http://digital.NI.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C

  If you IMAQdx 3.6, it is not supported on LV 2010. To find the latest version of the Software NI Vision Acquisition go to this link.

  http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

  I hope this helps!

• Microsoft Office XP and Windows 8.1

  My old faithful office went to heaven PC so I need but a new. I wonder if my copy of Office XP Pro 2002 version runs on Windows 8.1? The compatibility chart is a bit confusing, it says that my version compatible but then underneath said some programs such as Word are not. Any help would be appreciated.

  Thank you

  On Saturday, February 15, 2014 18:03:59 + 0000, RodRaschke wrote:

  My old faithful office went to heaven PC so I need but a new. I wonder if my copy of Office XP Pro 2002 version runs on Windows 8.1? The compatibility chart is a bit confusing, it says that my version compatible but then underneath said some programs such as Word are not. Any help would be appreciated.

  According
  http://blogs.technet.com/b/office_resource_kit/archive/2012/11/12/which-versions-of-Office-are-supported-on-Windows-8-and-on-surface-with-Windows-RT.aspx

  No, it is not compatible.

• HP DV6-6135dx compatible > 9 stacks?

  I can't find a specific answer online. I bought a battery battery EVO88AA 12 advertised as compatible with all models of DV6000, but it didn't fit... it does not fit in my old DV2500 notebook. I was wondering if anyone of YOU KNOW THE COMPATIBLE (IF ANY) BIGGER THAN 9 CELL BATTERY for MY LAPTOP (DV6-6135DX).

  No, in short there not more than 9 batteries for DV6-6135DX Unfortianatly HP. When you ordered your battery you have misunderstood that the DV6000 (DV6 #) is a former line of laptops. The DV6-6000 (DV6-6 #) is a new and very different product line in terms of spare parts.

  Compatible batteries for HP DV6-6135DX

  Long battery life 9

  Battery 6 cells long duration (standard)

  HP / Compaq battery compatibility chart

  Don't forget to mark as resolved and Bravo.

• What's compatible with 3050 CH563HE 122xl cartridge?

  My best regards and good morning. So, I need to buy another cartridge for my deskjet (i.e. 3050 all-in-in-one) and while I was looking on the internet I found this 122xl and I came to this doubt if it is compatible with my printer. I found a cartridge on your website compatibility chart, but there is no information about 122xl specifically. Then it is compatible or not? Must be safe because my 2ml cartridges are out and almost useless, and I found a good price on this 122xl (122 then regular preferably) and I would be very grateful if you give me the answer.

  Thanks for the attention,

  Marcos Patrocinio

  Guajara-Mirim/RO, Brazil.

  The Site of HP SureSupply lists the 122xl as being compatible with the Deskjet 3050 to the Brazil.