With the help of web galleries created in Lightroom

Similar Questions

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• With the help of A6, must create menu screen which allows the user to click a button creates a branch to other screens and return to the main menu. When returning to the main screen on which button will be gray or inactive.  How can I do this?  I created

  I am trying to imitate a piece of equipment.  I need the user to be able to click on the specific buttons that have the user to another or screens.  After viewing these screens that will be the user to the main screen where the user which buttons were pressed and which still needed to be pressed.  I create buttons image with the 3 States - who has worked except when the user returns to that slide is reset to zero, and if the user does not see the 3rd State of the button.  How can I get this 3rd State of stay after the user returns to the main screen?

  You can not 'keep' a State, that's what I said in my first answer: "you can create an image with that look of '3' State, make it invisible and show it with the same action when a button is triggered. You will need to insert extra that third picture, first hide it out and make it visible to the advanced action, which I explained. I called this additional 'Done_one' image in the example. The three States you're talking about are in a totally different way to Captivate: for down, more and up-state. You can just tell Captivate to keep a low State, it will be down when the button is pressed. Where my explanation of an additional image.

  No need for all the variables. Looks like you have a lot to learn about variables and advanced actions. I don't see another easy way to achieve what you want. It is not so difficult, tons of examples on my blog.

• With the help of converter to create on a local disk, not datastore ESX ESX machines?

  Is it possible to create conversions of machine ESX local/off line without sending them to a machine ESX?  Selection of a type of machine virtual infrastructure does not allow me to save the files locally, only connect to an ESX Server.

  I have an ESX machine off site and cannot do the conversion to the ESX machine due to the limitations of bandwidth.

  I did this conversion of computer VMWare Server 2.x registered on a local drive and then converting again when I am on the site with the destination ESX.  It works, but its faster to FastSCP data off the USB drive only in order to re-run the converter.  Backup/DR purposes, it would be also good to know that I had the machines I had converted 'ready to go' format ESX without having to re - convert.

  > Is it possible to create conversions of machine ESX local/off line without sending them to a machine ESX? Selection of a type of machine virtual infrastructure does not allow me to save the files locally, only connect to an ESX Server.

  No, you must select a destination ESX and vCenter to create a virtual machine that is specifically compatible with ESX.

  > I did this conversion of computer VMWare Server 2.x registered on a local drive and then converting again when I am on the site with the destination ESX. It works, but its faster to FastSCP data off the USB drive only in order to re-run the converter. Backup/DR purposes, it would be also good to know that I had the machines I had converted 'ready to go' format ESX without having to re - convert.

  Unless you use something like VCB (who still works a backup and restore process), it is probably the best way to do it.  If you select your output for VMware Server 1.x, the "nearest neighbour" of ESX.  Then you have a few extra options like http://kb.vmware.com/kb/900/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Search in HTML Help does not work with the help of Web to CHM converter script

  Hello

  My problem is simple:

  In fact, we use a simple HTML help with a chm file.

  The WebHelp offers more possibilities and the new script in RobotHelp 10 prupose for generate a WebHelp in a chm file, so perfect!

  But when I use the Web Help for CHM converter script, I generate a good chm file, I open it and do a search. The page on that research are based, but when I want to open one, I always have a message "this program cannot display this webpage".

  For more information, the search function works well when I do a simple HTML.

  Thank you in advance for your reply,

  François

  Hello

  How this may or may not work may depend on where the CHM is when you open it. It is on your C drive? If this isn't the case, it must be.

  In addition, if you copied it, it is possible you have to right click and choose "Unlock" in the property sheet.

  See you soon... Rick

• With the help of professionals to create the form to fill out that can save a user of reader

  New to Acrobat Professional. Used to create an evaluation of performance with areas to be completed and made available on our intranet.  All employees have just the free reader.  I assumed they would be able to complete and save on their own car because they are may not be able to finish in one sitting. Form requires supervisor to complete a section too, so was hoping they could send to them to complete.  Isn't this possible?

  You have a little more. Your form open: Advanced > extend features in Adobe Reader.

• With the help of Nikon D810 files in Lightroom - tried many solutions, no luck.  Help?

  Here is my snapshot of the current Lightroom system below.  I also tried to convert files to DNG using version 9.3 of Adobe's DNG Converter.  Nothing seems to work.  Thanks for any help.

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Mac OS 10

  Version: 10.10 [5]

  Application architecture: x 64

  Number of logical processors: 8

  Processor speed: 2.7 GHz

  Built-in memory: 16 384.0 MB

  Real memory for Lightroom: 384.0 MB 16

  Real memory used by Lightroom: 403,9 MB (2.4%)

  Virtual memory used by Lightroom: 2 265.2 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX

  Exhibition: 1) 2880 x 1800

  Graphic processor News:

  NVIDIA GeForce GT 650 M OpenGL engine

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 4.1 NVIDIA - 10.4.2 310.41.35f01

  Rendering engine: NVIDIA GeForce GT 650 M OpenGL engine

  LanguageVersion: 4.10

  Application folder: Applications/Adobe Lightroom

  Library path: Users/mikeross/Pictures/Lightroom/Lightroom Catalog.lrcat

  Settings file: / Users/mikeross/Library/Application Support/Adobe/Lightroom

  Plugins installed:

  (1) aperture/plugin importing iPhoto

  (2) Athentech perfectly clear v2

  (3) substantive canon Plugin

  (4) Facebook

  (5) Flickr

  (6) HDR Efex Pro 2

  (7) attachment Plugin Leica

  (8) home Plugin Nikon

  (9) perfect B & & W 8

  (10) the perfect effects 8

  (11) to enhance the perfect 8

  (12) perfect photo Suite 8

  (13) perfect Portrait 8

  (14) resize perfect 8

  Config.LUA flags: None

  Good news.  The problem has been resolved.

  Jim Hess has proposed the following:

  "I don't have a total solution for you. But in the screenshot you provided, the image you are trying to import is already on the hard drive. What happens if you switch from the copy option to add? I was wondering if that could import one image. We must start somewhere, right?"

  Just for info, before I had been using the function 'Copy' or the function "import and convert to DNG.  So I have exactly like Jim suggested and "Added" one image (a NAVE which had been converted to DNG).  By using the function 'Add' not only worked, but now, Lightroom is recognizing the file NAVE of Nikon D810 and import as a champion.  I don't HAVE NO reinstall Lightroom.  Just "Adde" that photo and that seemed to fix everything that was happening.

  I don't know about you, but I suspect there was a problem of association with Lightroom who need to restore a path to the catalog somehow.

  Thank you for all your help.  I sincerely appreciate it!

• With the help of several conditional tags with multiple outputs of WebHelp

  I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

  I added each help topic associated with the help topics that I created.

  Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

  My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

  Example: National accounts TOC

  What is generated:

  I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

  None of your screenshots came through - the icon of camera in the web interface allows you to attach images

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro

  Failed to create a 3D text (or 3D nothing else) all options in the 3D Panel are grayed out. With the help of CC 2015.1.2 on Mac Pro (end 2013)

  Thanks for the update.

  Go to the Photoshop preferences > 3D > check whether it shows VRAM than 3072 MB

  Look for the system updates and see if there are updates waiting for your graphics card drivers.

  And make sure that the document you are opening is in RGB and CMYK mode not.

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  I got a mini iPad 2 32 GB as a gift to replace a dead laptop but I'm not at all familiar with the product. Can I create and save word documents a presentations on a flashdrive off iPad mini?

  You can create word documents and powerpoint presentations, but you cannot save them directly on a normal USB.

  Microsoft made a version of office for iPad, you can find it in the App Store. Here is a link:

  Word

  https://iTunes.Apple.com/en/app/Microsoft-Word/id586447913?Mt=8

  PowerPoint

  https://iTunes.Apple.com/us/app/Microsoft-PowerPoint/id586449534?Mt=8

  There are usb drives that work with iPads, and you can save documents to those who use their own applications.

  http://9to5Mac.com/2015/03/20/the-best-iPhoneiPad-USB-flash-drives-with-Lightnin g-connectors.

  Also I suggest you read through the iPad User Guide:

  http://help.Apple.com/iPad/9/

• Help? With the help of file system Ext3 on key USB on Linux RT target

  We have been affected by problems with the SD cards and USB drives formatted in FAT32 on some devices, according to Linus RT of long-term monitoring (mainly the cRIO-9035). It seems that readers are vulnerable to fluctuations in current and unexpected reboots (which are inevitable on these sites). Write aborted operations make the damaged discs, thus sabotaging logging after reboot.

  We have identified two solutions; implement both gives the best redundancy:

  (1) installation of UPS (uninterrupted power supply for emergency supplies/batteries) - done

  (2) using the file system apparently more robust 'ext3', which is available on the target RT Linux (FAT32, ext2 and ext3) - don't have not so far:

  ->, I was not able to properly format a USB stick for ext3. I use the MiniTools Partition Manager and don't get any errors when create and format partitions. But they appear as 'read only' when it is inserted into the chassis of the RT. All attempts to access it, other than to observe the empty folder sdxx in ' / media "is returning errors.

  Someone had a bit of luck with the help of ext3 disks formatted as data drives on the objectives of the RT Linux? It is worthwhile to solve my problems or should I use FAT32 and the observed risk?

  I do not consider this but a temporary solution:

  I ran into issues when you use MiniTools Partition Wizard to partition and format my thumb on Win10 records. An unidentified change makes the inaccessible disks and freeze the browsing of file on the PC when I try to delete the partition. It was quite annoying!

  I decided to try another partition tool and went for the EaseUs Partition Master (free version for the moment). I formatted successfully one of the troublesome discs with it (to add some uncertainty to the solution, I used another brand sp * banking, new PC to do). The reader now mounted in read-write and allows the startup application create the I want to store files in folders.

  I'm very curious to know the difference between the tools of both partitions and their formatting...

• With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable

  Hello all

  I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.

  Here is my logic and a concrete example:
  (1) the wave source signal is continuous
  (2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
  (3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.

  I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly.  As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel.  That way I can control which coil is on and offshore and in what order they are activated.

  I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1.  I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.

  Should I do this another way

  TIA

  A waveform contains an array of values. You must check every value and respond accordingly:

  

• With the help of semaphore with a Global Variable - correct use?

  Hi all

  I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

  In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

  A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

  I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

  Thanks for any help!

  CelerityEDS wrote:

  The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

  ??

  Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

  Have you tried in your point culminating execution of the VI in order to see how they are actually running?

  Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

  I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.