with third party applications, I can read and write on the external drive HFS + for windows?

Similar Questions

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• How to view the monthly/annual statistics in terms of time past/calories burned, broken down by each individual activity such as run elliptical/outside etc. Y at - it a third party application that can help me to collect and display these data?

  How to view the monthly/annual statistics in terms of time past/calories burned, broken down by each individual activity such as run elliptical/outside etc. Y at - it a third party application that can help me to collect and display these data?

  Hello

  It is not currently possible to review the data the application integrated in activity or training on this basis. If you want Apple to consider adding this feature, you can suggest here:

  https://www.Apple.com/feedback/watch.html

  However, health and fitness data from other sources, iPhone, and Apple Watch are registered and grouped within the health on iPhone app. These data can be exported, which you may find useful to track the cumulative progress and/or analyze your activity more in detail.

  IPhone app activity also has a button for sharing (top right of the screen) that allows to share data - including social media, Messages, Mail, Notes, and a printer.

  Include third-party applications that can be useful, for example:

  Access to QS

  -"Access your HealthKit data in a table so you can Explorer using numbers, Excel, R, or any other tool compatible CSV."

  - https://itunes.apple.com/gb/app/qs-access/id920297614?mt=8

  SpectaRun workouts

  -"View from the workouts of your Apple Watch on your iPhone and to export these workouts so you can download them to your favorite online running community."

  - https://itunes.apple.com/gb/app/spectarun-workouts/id991723862?mt=8

  Data can also be exported directly from the application of the health (Health Data > All - Share at the top button on the right).

  Check the descriptions and support resources for third party applications for supported details of import and data analysis features.

  More information:

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  http://www.Apple.com/watch/health-and-fitness/

• TCP Read and Write at the same time

  Hello everyone,

  I have a question about parallelism in TCP connections.

  I know that it is possible to read and write on the same connection ID.

  So, if you ReadTCP and WriteTCP block each other, if you use the same TCP connection ID?

  Or to request more precise if I run two while loops, in parallel, with one end by calling WriteTCP and the other called ReadTCP.

  one of the delay of loops (or block) will be the other if both loops call their VI TCP at the same time right?

  The system is Windows 7 and Labview 2012.

  Kind regards

  Sebastian

  They are perfectly parallel.  Just write in one and read it from the other.  There is no conflict.

  See My TCP articles for more details.

• How bridge communicates with third-party applications?

  Hello

  Is it possible to communicate between Adobe Bridge and a third party request help SDK bridge?

  I want to learn how bridge can communicate with another application? SDK bridge have samples that explain how the bridge communicates with other applications such as Photoshop and Indesign Adobe. Can someone guide me or give me a sample where bridge communicates with a third-party application?

  Thank you.

  There is no direct access to the deck from a non Adobe application.

  If you need to access bridge, it must be done via another application such as Photoshop Adobe. THAT IS TO SAY: -.

  C# - Photoshop - bridge

  You must use BridgeTalk to send and receive messages between Photoshop and Bridge.

• Can burn is no longer my music on a CD - RW with Windows I Tunes, error message says is no longer can read or write on the discs. Allows burning the same disc on a Mac, why?

  Why does my version of Windows of I Mac is more will allow me to burn music to a CD - RW, it keeps saying it can't read or write on the discs. Why? I had previously burned discs with I Tunes without any problem.

  This article may help:

  12 iTunes for Windows: If you have trouble burning a disc

  especially the last paragraph.

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• How can I disable ipv6 on the newer airport utility for windows?

  I downloaded the latest airport utility for Windows and I can't find any option to disable ipv6. Can someone tell me how to do this.

  You cannot disable IPv6, but you can disable the IPv6 Internet from the Internet connection.

  Open the AirPort for Windows utility

  Click on the router from the most convenient airport to select

  Click on the installation manual

  Click on the Advanced Options (gear icon) button to the top of the AirPort Utility window

  Click on the IPv6 tab, which appears just below Advanced

  Make sure that the IPv6 Mode is set to Link-Local only

  Click Update at the bottom right of the window and allow a minute for the airport to restart

  

• Communication problems with third-party modules using Labview 2012 and cRIO-9024.

  Hi all

  I recently bought the module moviemed 1501 AF but I am unfortunately not able to communicate properly with him. I followed all the instructions in the Manual, but nothing helps. I downloaded the drivers and software recommended, but whenever I try to add the AF 1501 in special edition module C-series (in the menu drop-down), Labview does not see it.

  When I installed the driver for the module he asked for what version of Labview, I was running (2009 or 2010, no option to 2012), I chose 2010. Could be the problem?

  Thank you!

  Hi Mswn,

  I would just like to ask if you can see other modules of the series-C on your chassis - other modules appear correctly?

  I also see that MoviMed is no indication that they offer LabVIEW 2011 and 2012 of pilots to the AF 1501 hereproduct page. Here are the drivers you are using?

  Andy C.

  Technical sales engineer

  National Instruments

• Read and write to the local XML file

  Hello

  I'm trying to understand how to use the xml files saved locally. My goal is to create an xml file in the repository of the application (which has read/write permissions), add data in this file xml and re - register so that it can be retrieved whenever this is necessary.

  I want to store xml data are farily short; It has the following structure:

  
      x
      x
      x
      x
      x
      x
      x
      x
      x
      x
  
  
  
  ...etc.
  

  I read a few articles about recording and writing in a file like this, but none of them does not seem to work. I hope someone could provide me with the code to do this.

  Thank you.

  Try:

  ///////////////////////////////////////////////////////////////////////

  public public static function Store (name: String, data: String): void

  {

  var file: file = File.applicationStorageDirectory.resolvePath (name);

  var file_stream: FileStream = newFileStream();

  file_stream. Open (file, FileMode.WRITE);

  out of the var : String = '\n';

  output of +=;

  output = output.replace (\n/g, File.lineEnding);

  file_stream.writeUTFBytes (output);

  file_stream. Close();

  }

  //////////////////////////////////////////////////////////////////////////

  public public static function Get (name: String): XML

  {

  var config: XML = null;

  var file: file = File.applicationStorageDirectory.resolvePath (name);

    if (file.exists)

  {

  var file_stream: FileStream = new FileStream();

  file_stream. Open (file, FileMode.READ);

  config = new XML (file_stream.readUTFBytes (file_stream.bytesAvailable));

  file_stream. Close();

  }

  return config;

  }

• Problem with opening programs of text and photos after the upgrade of computer for Windows 8

  Original title: Photos open in Notepad

  Hello

  Laptop with win 8.

  Recently upgraded XP to win8 with purchased MS DVD.

  All text programs open graphics (pictures) in Irfanview & if I send them WORD show as hieroglyphics jeeperish.

  And all the photos to open Notepad in hieroglyphs jeeperish but if I open them with "Sendto" Irfanview or MS photo editor pictures appear.

  Seems the association went haywire. How can I fix this please?

  8 win in my PC is not that.      .. thanx... .Nick

  Hi Nick,

  Please contact Microsoft Community. I understand that you have a problem with opening the programs of text and pictures after the computer upgrade to Windows 8. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  This problem could occur if the default applications are not set correctly.

  I suggest you read the article that will help define the default applications that Windows automatically uses when you open a particular type of file, such as a song, film, photo or Web page.

  Choose the apps Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows-8/choose-Programs-Windows-uses-default

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Questions about serial port read and write at the same time

  Hi I create a user interface for the communication serial port, where there are essentially 2 front panels, where the user enters commands one and the other where the prints of UART is delivered. I thought initially using a state machine but the reading and writing may be independent sometimes and so I can't rely on States. I searched a bit on the forum and he left me even more confused. Help, please.

  (1) in a thread that sessions visa duplicated has been used for writing and reading at the same time, is it recommendable? How will this affect performance?

  (2) essentially when the vi is reading data are it must constantly view as well, however, someone said that it takes too much memory to use shift registers, so how do I go about this? If using a State in queue after the loop of reading it affects the playback loop and be sequential?

  In addition anyway is to move the cursor to the latest data from the indicator

  (3) for the control of the user input, assumes that the user has entered an order in the control and press ENTER, then writing visa is launched, but if it comes in another string and press enter then write must be called again... is - it possible? will detect the previous commands in the control of compensation?

  (4) according to my understand the expectation for the event do not monopolize resources and writing can go in parallel, am I right?

  Thank you. I have attached a very basic vi which took me to the point, but I want to make it more robust. Please help especially in the part of the user interface.

  su_a,

  (1) you can have only one session to a port. Several UART can handle full duplex so performance is not affected.  At flow rates of high data and large amounts of data, buffering and latencies of BONE can become a problem.

  (2) who told you that shift registers using too much memory? Shift registers are usually the best way to transfer data from one iteration to another. String concatenation inside a loop (registry to offset or not) causes the chain to develop and may require re-allocation of memory.  Your VI never clears the string so its cold length become very large.

  Generally, you do not have an active cursor on an indicator.  If you want to always display the most recently received characters and turn on the vertical scroll bar use a property node to keep scrolls to the bottom.  This can be annoying for users if they attempt to manually move the scroll bar and find that the program continues to move it back automatically.

  (3) if the user has changed the value in the chain of command, when he hits enter the modified value event fires.  Simply strike brace does not change the value and does not trigger the event.  Not control need to be erased, but the value that he has to change.  If you want to send the same command again, have a button send a command may be a better choice.

  (4) write is a case of the event.  It is not in parallel with anything.  The structure of the event do not monopolize resources.  The other loop will run while it waits.

  The event loop will not stop when you press the STOP button. Probably it wll take two command: change events of value after JUDGMENT before any loop stops.  Replace the Timeout event (which never expires) with a STOP: value change event and a real wire of this judgment to the Terminal endpoint.  Remove the local variable.  Make mechanical locking when released.

  Lynn

• How to use the two counters to PXI-6280, to read and write at the same time?

  Hi all

  I try to use PXI-6280 counter to generate a command of step motor pulse train.  The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.

  Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.

  Thanks in advance,

  Giavonna

  Electrical engineer

  I'm afraid that I don't understand your idea. Could explain you better?

  Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter).  If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter.  There should be examples in the finder of the example shows how to configure a finished task of digital output.

  Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.

  I don't think not just single point NI the hardware, that's what you want.  More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.

  Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?

  Yes, but it's a little tricky.  You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry.  Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output.  Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal).  When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause.  You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).

  Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here .  It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).

  Is there a way to read pulses them how have been generated, without the other counter, counting impulses?

  N °

  Best regards

• Synchronization problems of workout data to a third party applications such as Strava and Garmin Connect

  I use my Apple Watch in 'training' mode but want to use the info in other applications like Strava and Garmin Connect. I gave permission to these applications in the Apple Watch setting, but it is still not sync. I would also like to be able to carry my "data steps form the app health on Garmin, but not get anything to synchronize."

  In the meantime I record only in 'training' and Strava. This of course does nothing for data of measurements.

  Any ideas on how to proceed?

  Hello

  Strava to Garmin Connect Mobile Developer support is available here:

  • Strava:
    • https://strava.Zendesk.com/home
  • Garmin:
    • https://support.Garmin.com/support/searchSupport/search.faces?refresh=true&Produ ctName = % 20Connect % 20Mobile Garmin
    • Search for "HealthKit" and read this response: "How iOS HealthKit works with Garmin Connect Mobile?"
    • The article suggests that the data are shared to Garmin Connect Mobile enforcement of health, not the other way around.