Advanced mini Dock is able to support the new ThinkPad?

Similar Questions

• T400 and Advanced mini dock

  Hi - I have a T400 with integrated graphics card and I'm looking into getting a mini dock advanced to run an external monitor.

  What output resolution has done with success through the advanced mini dock VGA port? -This will help me understand which monitor to get, I read that many had bad signal of the dock when using the VGA port.

  As my T400's only integrated graphics, I won't be able to use the port DVI - is this still true or something changed?

  Your comments would be much appreciated,

  Thank you

  Cosmin

  Hi cosma12,

  Your T400 with integrated graphics can digital video output through integrated DisplayPort or DVI connector on the advanced Mini dock. It is only the switchable T400 graph that cannot use DVI with integrated graphics card, they must use the ATI chip instead.

  Graphics from Intel in the T400 can drive 1920 x 1200 on DVI or DisplayPort - which I think is the highest resolution, supported by the single-link DVI. If you are shopping for monitors, I highly recommend to make one with a digital input: DVI / HDMI / DisplayPort. the video quality is theoretically (and practically) better than when using analog (VGA).

  EDIT: Oops, the T400 (and R400) do NOT have the DisplayPort, while the largest do T500/R500. My bad.

• T500 compatibility with Advanced Mini Dock 2504

  Help please!

  I have a mini advanced docking station 2504 I used with my R61 successfully for a few years.

  I recently bought a T500 and was informed by the sales department that my existing 2504 advanced mini dock would be compatible with the T500.

  When I use the mini dock with the T500 no USB port works not at all?

  All the solutions or do I need a different mini dock.

  they are definitely compatible.

• 2504 advanced Mini Dock

  Hello, I think I have an advanced Mini Dock for use with T60 my family Christmas. I would use it to connect the laptop to our TV for watching movies.

  My TV has these ports:

  Composite

  Component

  S video

  HDMI

  There are port VGA No.. If there was, it would have been great. :/

  It supports resolutions up to 1080i. I would be able to establish a connection? If so, how?

  I don't want to buy what it does not work...

  For a better quality of film get a dvi to hdmi adapter, but you'd need a race a separate line for audio, as the dvi to hdmi adapter are not audio.

• T500 GMA DVI Boot - Advanced Mini Dock: works with a monitor, but not another

  Hello

  I have a type of T500 2242 with GMA X4500MHD graphics in Advanced Mini Dock. BIOS 1.20, startup display set to the DVI connector. Cable DVI - D single-link of the dock-> DVI - D input on external TFT monitor. I get different results according to the attached monitor:

  (1) PX191 19 "1280 x 1024 native plane: splash screen appears on the external monitor.

  (2) "Topaz" Soyo DYLM24D6 24 "native 1920 x 1200 S: external monitor stays off, the splash screen appears on the screen of T500.

  I also have a T42 with Mini DVI - D Dock, -- this one shows the start screen on the 24 "monitor without problem, using the same cable dvi - d single-link I tried with the T500.

  In the case that this can help, EDID info here is for the 24 "monitor, of log file xorg running Linux on the T42:

  (II) RADEON (0): EDID data from the display connector: DVI - D -.
  (II) RADEON (0): manufacturer: XXX model: 76th serial No.: 16843009
  (II) RADEON (0): year: 2007 week: 30
  (II) RADEON (0): EDID Version: 1.3
  (II) RADEON (0): Display Digital Input
  (II) RADEON (0): Max H-Image size [cm]: horiz. : 52 green. : 33
  (II) RADEON (0): Gamma: 2.20
  (II) RADEON (0): doctors of Podiatric Medicine capabilities: standby Suspend Off; Display/color RGB
  (II) RADEON (0): first timer detailed is the preferred mode
  (II) RADEON (0): redX: 0.640 redY: 0.340 greenX: 0,295 greenY: 0.610
  (II) RADEON (0): blueX: 0,145 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
  (II) RADEON (0): VESA graphics Modes supported:
  (II) RADEON (0): 640x480@60Hz
  (II) RADEON (0): 800x600@60Hz
  (II) RADEON (0): 1024x768@60Hz
  (II) RADEON (0): mask of the manufacturer: 0
  (II) RADEON (0): future video Modes supported:
  (II) RADEON (0): #0: hsize: 1280 1024 refreshment vsize: 60 vid: 32897
  (II) RADEON (0): #1: hsize: 1920 vsize 1200 refresh: 60 vid: 209
  (II) RADEON (0): #2: hsize: 1152 vsize 864 refresh: 60 vid: 16497
  (II) RADEON (0): #3: hsize: 1280 720 refreshment vsize: 60 vid: 49281
  (II) RADEON (0): #4: hsize: 1680 1050 refreshment vsize: 60 vid: 179
  (II) RADEON (0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291
  (II) RADEON (0): #6: hsize: 1440 vsize 900 refresh: 60 vid: 149
  (II) RADEON (0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
  (II) RADEON (0): Mode supported additional video:
  (II) RADEON (0): clock: 154.0 MHz Image size: 519 x 324 mm
  (II) RADEON (0): h_active: h_sync 1920: 1968 2000 2080 h_border h_blank_end h_sync_end: 0
  (II) RADEON (0): v_active: 1200 v_sync: 1203 1209 v_blanking v_sync_end: 1235 v_border: 0
  (II) RADEON (0): serial number: U7301D2180063
  (II) RADEON (0): ranges: V min: 56 V max: 61 Hz, H min: max 30 H: 83 kHz, PixClock 154 MHz max
  (II) RADEON (0): name of the monitor: M24EI5
  (II) RADEON (0): EDID (in hexadecimal):
  (II) RADEON (0): 00ffffffffffff0063186e0701010101
  (II) RADEON (0): 1e11010380342178eac905a3574b9c25
  (II) RADEON (0): 1250542108008180d100714081c0b300
  (II) RADEON (0): 8bc09500a940283c80a070b023403020
  (II) RADEON (0): 360007442100001e000000ff00553733
  (II) RADEON (0): 30314432313830303633000000fd0038
  (II) RADEON (0): 3d1e530e000a202020202020000000fc
  (II) RADEON (0): 004d32344549350a20202020202000e0
  (II) RADEON (0): DVI-0 output activated by the configuration file
  in RADEONProbeOutputModes
  (II) RADEON (0): I2C device "DVI_DDC:ddc2" recorded at address 0xA0.
  (WW) EDID favorite synchronization clock 154.00 MHz exceeds claimed max 140 MHz, setting

  Maybe there is something wrong with the Soyo is EDID? Or a bad interaction with the T500 BIOS?

  I would be grateful for clues on how to get the start screen to display on the monitor 24 ".

  Thank you

  Frank

  Good news! I sent my T500 in-service, and Lenovo replaced the motherboard. Now, the startup screen is correctly displayed via the dock to my monitor's DVI port external 24 ". After what Linux / X sees the external monitor and it puts in place and it displays correctly. So: problem solved! Thanks, Lenovo

  Before the swap of the Board of Directors system, I was able to use a cable DVI DisplayPort / talk to the 24 "monitor. This requires an extra cable to plug/unplug, so it's nice to finally have the DVI dock work.

  It seems that this problem only arises with some ThinkPad + external monitor combinations. My original system card worked fine with a 19 "monitor. And another Member pointed out that a single version of a 19 "works fine with its T500 Belinea monitor, even if a previous version does not. (See this thread for more details.)

• Battery ThinkPad Advanced Mini Dock (250410U) display will not extend

  I have a T400 (2764 CTO with a Radeon HD 3400), an Acer 23 "monitor and an advanced Mini Dock (part 250410U, model 2504). I am trying to expand the display of the T400 to the Acer monitor via a VGA cable. When I plug the monitor directly into the laptop, the screen extends. However, when I dock the T400 and connect the monitor to the Mini Dock, I can't get a signal on the screen. Any thoughts? Thank you.

  the same behavior occurs with the Intel GPU mode is?

• T400 and Advanced Mini Dock - does not detect DVI monitor

  I have a T400 with integrated graphics and Windows 7 Professional 64-bit, and I recently bought an Advanced Mini Dock for it.  I have a Dell 1800FP monitor connected to the dock via the DVI output.  When I anchor the T400, the system does not detect the external monitor.  If I go to the resolution of the screen and click on detect, it does not appear.  The weird part is that if I reboot then than in the dock, when the system comes back he * is * detect and use the external monitor.

  Any ideas what's happening?  Other equipment connected by the base (USB, Ethernet cable devices) all work very well.

  I think I solved this problem.  I uninstalled my video driver and installed the latest version from the Lenovo Web site (which was more recent than the one found by Lenovo System Update).  Now my system properly detects the external monitor when I attach to the docking station.

• GarageBand wasn't able to install the new sounds

  I'm under GarageBand 10.1.2 & OS X El Capitan 10.11.6 on a Macbook Pro 13 retina "(2016).

  A couple of weeks, that I have installed additional drummers with no problems. I noticed, however, that many of the sounds in the sound library had an icon to download next to them; so I went to the GarageBand menu, option "Sound Library / download all the available sounds" and they begin to download immediately. Most of them have installed fine (and is still usable), but at some point the download has stopped and a window appeared with the message "GarageBand wasn't able to install the new sounds. Close and re-open GarageBand to download and install again. »

  Since then, whenever I open GarageBand, downloading continues automatically, but after a few minutes I get the same annoying message.

  I searched the Internet and tried all the following without success:

  (1) closed and reopened GarageBand

  (2) given in market system

  (3) delete the folder "/ private/var/folders/lq/nb_0wt4d1zq5rs933745flww0000gn ' and all its contents

  (4) remove the "user/Library/Caches" folder and all its contents

  (5) the latest version of Java from Oracle (update version 8 101 - build 1.8.0_101 - b13)

  I always feel the same frustrating lock when I open GarageBand (download starts and after a while it stops and the error message shows up again... and again once).

  I've included some screenshots on this post below, which illustrate the issue.

  Thanks in advance for any help you can provide me with!

  

  

  Just to be sure - you have enough free storage to install all the new sounds? The instrument only GarageBand library has 14GB on my Mac.

  Until you try to install the sounds still launch the Console application and look for messages of diagnosis in the Console, when GarageBand gives the error message.  Are there clues, all messages associated with GarageBand in the Console window?

  Sometimes third part applications or incompatible system additions could cause this kind of problem, as firewall and antivirus software, for example, Little Snitch or Kaperski. If you have any of these installed, disable it before attempting to download the software.

  To prevent the non-standard extensions system to interfere, restart the Mac in Mode safe, before you try to install again, see: try safe mode if your Mac does not commissioning - Apple Support

• Please cancel my subscription without cancellation fees so that I'll be able to order the new promotional offer.

  Please cancel my subscription without cancellation fees so that I'll be able to order the new promotional offer

  Go to Adobe Creative Cloud

  
  

  Hello

  Please contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  Kind regards

  Sheena

• I want to buy a legitimate copy for Windows XP. Would I be able to activate the new copy of XP?

  I want to buy a legitimate copy for Windows XP.
  Would I be able to activate the new copy of XP?

  Yes, you will provide that it is a legitimate copy that is already activated on another machine.

  John

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

  Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
  
  So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.

  
  

  If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.

  
  

  I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

  I hope that helps some of you save a whole day unnecessarily.

  Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

• Be creative cloud for Lightroom and Photoshop support the new Canon Mark II 1DX CR2 files? [was: RAW CR2 files]

  Be creative cloud for Lightroom and Photoshop support the new Canon Mark II 1DX CR2 files?

  Yes, take care that the camera has been added in Camera Raw version 9.5.

  Devices supported by Adobe Camera Raw

• Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Hi, I have 4 of Lightroom, but it does not support the new objective of pd 10-30 for my Nikon 1. It is supported in LR5. Can I download the profile of this lens and install in LR4?

  Wow! It worked! Thank you very much! You just saved me buying a new verion of Lightroom (which is of course why Adobe does not update these profiles automatically).

  Thank you very much!

• Is there a plug-in to support the new Canon 7 d mark 2 raw files?

  Is there a plug-in to support the new Canon 7 d mark 2 raw files?

  Native support of Lightroom for the D750 has been added in the Lightroom update published 5.7 tonight.

  Version details:

  Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html

  Camera Raw 5.7: vailable.html http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a