Brander DVW/RW can read and write DVD double layer dvd

Similar Questions

• with third party applications, I can read and write on the external drive HFS + for windows?

  Hello

  I see with third party app I can read and write to external disk NTFS on the mac computer.

  then othrwise, then I can read and write on extern hardrive HFS + with application of third party windows computer.  So who are the best third-party applications to read and write HFS and if they are free of charge on the external drive?

  Thank you

  Johan

  Now that I understand your goal, check out http://www.ufsexplorer.com/rdr_hfsp.php but your YMMV.

• Using the same interface CAN read and write

  Hello.

  Can I use the same CAN interface to read and write?

  For example:

  I send you CAN frame using CAN1 to my MCU.

  IF MCU confirmed the order of receiver it immediately sends the echo return command and there different ID to send the command.

  I tried to use CAN1 output framework and then reconfigures CAN1 to frame in queue and retrieve the frame of the echo.

  But it seems that I was always missing. The 'framework of CAN' kept vi expire.

  When I used the separator on the outlet BOX in my configured MCU CAN1 for frame and CAN2 for chassis in and I managed to catch the echo framework.

  I think about 100 ms for the frame in response that will be sent after the order has been received. It takes longer for the NI PXI-8513 reconfigure? Can I still do it, or I have to use the separator?

  I wad jump to use an interface to read and write.

  Thank you

  Ok. I misread your notion of echo. I understand now. I'm sorry.  The code you posted seems reasonable.

  (1) did you notice on or off for the session?

  (2) what baud rate? You can add a parameter of baud rates for the property to be explicit node.

  (3) I don't remember the name of VI, but you can add a status of Comm Get after reading. This will give you some information about the bus - if errors were detected, etc. Which can be useful to help debug.

• DVD/CD RW do not read audio CDs or data or save a blank CD, but that it's ok to read and write DVDs

  My DVD/CD RW drive will not respond to CDs of any type, void, audio or data.  It whirs for a few seconds and then more nothing.  No AutoPlay (even if she is selected and in the registry as a value of 1), and if I try to click on the drive, the old hourglass stand forever and if I click on new does not, unless I have the disc, it erases then back to normal.

  The drive works fine for DVD reading and writing.  I tried to little nearly every thread relating to problems of CD, and I ran out of hair out! I uninstalled it, unplugged, repluged, rebooted, reinstalled, you name it! PC has updated the driver when I try to update.  I did all the advice regedit I saw and still nothing!  Anyone?  Please?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  CD have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Qosmio F30 - 112 - DVD player can read and burn DVDs

  Hey everybody!

  Here's the problem: my DVD-ROM won't read some DVDs, it does not burn. In Nero when it start burning error pop up and the message is: Power calibration error

  I tried with all the testers for writer and reader of alerady and they all did not find any problem. They said that the recorder and player work properly. I even reinstalled twice end it always shows me this error and it will not burn or read some DVD Windows Vista (which I tried to read another computer and there is no problem). I tried to clean it with cleaning and nothing.

  I think that this problem started since I've updated the firmwire F103, but I do not know...

  Help please.

  Hello!

  Was the update of the firmware of your CD/DVD drive or have you another one? In my view, the drive could be faulty due to a bad firmware

  But before you exchange the drive, you should try to remove the upper and lower filters in the Windows registry:
  (1) start Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Could not read or write DVD-RAM

  Even if my material indicates that he can read and write DVD-RAM, all of a sudden I can't recognize discs dvd - ram, that I stored things on front. I followed one of the forums and has released Service Pack 2 and that worked for a while and then stopped working again after a few updates have been installed. I tried again to SP2 and then pushing out, but not joy. No idea how to fix this? I went through Fixit MS and the thing Upper and Lower filters, still no joy.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• DVD RW drive (D :) will not read or write DVDs)

  My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

  Thank you very much!

  Sue

  Hello

  Someone helped me to fix my computer, the problem disappeared.

  Thank you very much.

  Sue

• Problem with digital I/o read and write in CVI

  I have a PXI with PXI 6225 Renault installed box. For some uses, I wired 4 lines of digital port 0

  for its 4 top lines so that the output digital on bottom lines can be read as a digital input on the top lines.

  In the CVI program I have set up two input and output of tasks as follows:

  Enter task:

  DAQmxCreateDIChan (digitalInputTask, "PXI1Slot5/port0 / line4:7","InputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming (digitalInputTask, ' AI/SampleClock ", 4000, DAQmx_Val_Rising, DAQmx_Val_ContSamps, 2000" ");

  Output task:

  DAQmxCreateDOChan (digitalOutputTask, "PXI1Slot5/port0 / line0:3","OutputLines", DAQmx_Val_ChanForAllLines ");

  DAQmxCfgSampClkTiming(digitalOutputTask,"ai/SampleClock", 4000, DAQmx_Val_Rising,DAQmx_Val_ContSamps, 2000));

  DAQmxCfgOutputBuffer (digitalOutputTask, 2000);

  I also started a task of analog input to ensure that the analog "IA/SampleClock" sample clock is running, and I check

  as I interpret the correct analog data of my analog lines.

  Here's the problem:

  I write 2000 identical samples of zero for the 4 lines (port0/$line0... (3) with the following command:

  DAQmxWriteDigitalU32 (digitalOutputTask, 2000, 1, 10, DAQmx_Val_GroupByChannel, sampleArray, & writing, NULL);

  After a while, I try to read the 4 lines (port0/4... (7) using the:

  DAQmxReadDigitalU32 (digitalInputTask, 2000, 10, DAQmx_Val_GroupByChannel, scanArray, 2000, & read_num, NULL);

  but the values returned in scanArray are nil!

  If I replace the digitalInputTask by digitalOutputTask in the above function call, I get the good samples rewritten

  (do not know how the 4 lines below that are configured in output mode can be read back! could it be just read buffer?)

  I don't know that the hardware configuration is correct, because when I try to emulate this feature in Labview, it works.

  (I use an output data acquisition assistant to write down the 4 lines of port 0, using a digital wave of entry, then)

  top reading 4 lines with the help of one Assistant DAQ to enter a digital waveform VI.

  In another test, I have 4 lines below in CVI, put on stop my CVI program, start a simple Labview VI to read from

  upper 4 lines and I can see the values I just write in CVI).

  Any idea what could be causing DAQmxReadDigitalU32 to read only zeros in CVI?

  I compared my settings in CVI with parameters DAQ assistant in Labview and tried to make them identical, but nothing helped.

  Thank you

  Try to use these examples to see if you can read and write in CVI

• Read and write data to the content repository.

  Hi all
  We use the content repository to store a document and images on the web server in the Center.
  So we have created/setup a repository of content on the web center.
  Please proivde me some might document page to get an idea of how I can read and write the date
  content repository.
  You are most welocme to provide some idea /suggestion.
  Thank you
  Arun.

  You are using webcenter spaces or you create a custom application webcenter?

  When you create a custom application webcenter, you can make use of the workflow Documents. Jdeveloper resources catalog, you will find a few flows of Documents job that will allow you to add some components to manage documents in a folder structure.
  You must first create a connection to your content from your application server. This can be done in the Application resources, right-click on the connection and in the context menu, select "content repository". Them you must filll in connection to your content server details. Make sure you have selected "Set as primary connection for document service" because otherwise the document taskflows you deposit on your page will not find a connection.

  Once you have added the connection, you will also find a datacontrol to the content repository. In this way, you can use the datacontrol place the taskflow and you can create several custom tables.
  I'm not sure but I think the datacontrol also include surgery to create the document but I'm not sure...

  And if not enough, you can always do use the webservices provided by content server. In Jdeveloper you can easily create a datacontrol from Web services by providing the wsdl file. UCM provides for services so that you can import the wsdl into your application and you can easily create your own forms checkin, tables...

  Here is some information on how to integrate services document:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_doc_lib.htm

  and here are some others:
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10148/jpsdg_content.htm#BABCCFJH
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e10149/documents.htm#WCSUG2635
  http://sqltech.CL/doc/oas11gR1/WebCenter.1111/e12405/wcadm_documents.htm#WCADM205

  Published by: Yannick Ongena on Oct 8, 2010 08:23

• Satellite M100 - can only read and write CDs.

  Hello
  I use a Satellite M100 Version PSMA0L-18203E on windows xp sp3. My DVD writer model is HL-DT-ST DVDRAM GMA-4082N.

  The problem is an am able to read and write Cd but when I insert a blank dvd, it displays "Please insert a disk in the drive" so that I am able to use Recovery DVD ROM from Toshiba with no problems. Please help me.

  Hello

  As wrote Al - Ex what program you use to burn discs? I have good experience with Nero and CD Burner XP. Can you test with one of them, please?

  In addition, you must also use high quality media. I have good experience with the types of DVD-R Verbatim and TDK.
  What DVD's that you have?

• Read and write of series Basic can't read a second time

  Hi, I'm developing my own VI to write and read an iRobot Create.  I based my vi off the coast of the basic series example write and Read.vi I found (on LabView 8.0).  When I run my vi I am able to read information from the beginning to create, but I am unable to read a second time (after a write command).  The second reading should be the same as the first (I checked with the help of another program that is linked to the creation).  I am new to using LabVIEW and I was wondering if there is a common mistake made by trying to implement a series of read and write.

  Thank you.

  First of all, to debug your orders with a program such as Hyperterminal. If it works there, then it should work in LabVIEW. You may need to send a carriage return and newline (\r\n). Your code is not currently set up to do.

  Only do something when a button is basic programming LabVIEW. You can use a simple while loop with a façade that Boolean connected to an instruction box. If you have anything other than the basic version of LabVIEW, you should use the structure of the event. Look at the examples that come with LabVIEW.

• I read and write English but my husband reads and writes in Russian. How can I activate the taskbar of the Russian language?

  My husband is from the Russia.  It reads and writes in Russian and I'm having a problem turning on the Russian keyboard.  I went many steps of the menu start, Control Panel, regional and language options, languages, details.  I added the Russian.  under the Russia, there is a symble of a keyboard than Russian (typewriter) Russia and the United States.  acorrdign at every stage, there should be a tab in the bar of tasks showing that I can switch bewteen eglish and Russian.  who does not come to the top.  I have check the tab bar of language and made sure all the boxes are ticked, but I still can't find the language bar. what I am doing wrong?

  I don't need a translator who is the other thing that I still find.  I need for my husband who bought the computer to be able to type in Russian, his mother tongue.

  Thank you for your time,

  Heather

  See if that helps you

  http://Office.Microsoft.com/en-GB/Outlook-help/switch-between-different-languages-by-using-the-language-bar-HA010362283.aspx

• Lsass.exe on Vista constantly reads and writes three times. How can I stop this please?

  After starting calm down.  Task Manager indicates that LASS. EXE continuously reads and writes.  It shows three readings and three written a couple of times per second.  The readings are still 204 bytes and the writing are always 132 bytes.  This action stops.

  I searched the web for answers and tried all the suggestions and nothing worked.

  Any ideas please?

  Hello

  I suggest you go through the link that talks about a similar problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/03638144-f4da-4349-B246-a27ec3727e70

  You can also post your question to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity

• Satego X 200 - 21 d: drive DVD TS-L632D is not read and burn DVD-R DL

  Hallo,

  I have problems with my DVD SATEGO X 200 - 21 d
  TS-L632D read a burn only DVD-R DL discs.
  I contacted Toshiba support via e-mail and asked
  for a new disk firmware, but the answer did not solve my problem.

  There are only updates in the download area of toshiba,
  but not for my car model. I can send my laptop
  for the money to a service partner, to check this problem.

  I do not understand this! I bought a laptop upscale
  for 1,700 EUROS and there is no support for the update of the firmware
  available to solve problems with newer drives?

  If I get this problem in the WEB, there is an a large number of
  questions and problems with playback and engraving
  Discs DVD-R DL with this drive model!
  How is it possible?

  I hope for some advice to get an update of the firmware player
  to solve the problems of reading and writing DVD - R DL discs.

  Janni J. Gettings of Germany

  Hello

  I found the update of the firmware on the European driver Toshiba page!

  Satego X 200 - 21 d seems to belong to the PSPBEE and the Toshiba page provides the update of the firmware to TO02.
  It s for the TS-L632 reader.

  But generally not all CD or DVD of all manufacturers is fully supported.

  My knowledge of the user manual should provide a details and info on compatible and tested media.
  Using recommended media, you can be sure they will be compatible and will work 100%.

  Greetings