With Toshiba Tecra S3 RAID hard drive temperature monitoring

Similar Questions

• Installation of Windows XP on TecraS3 with a 320 GB SATA hard drive

  Hallo,
  during the installation of Windows XP on a Tecra S3-SATA hard drive is not discovered.

  Details:
  Laptop: Toshiba Tecra S3, model PTS30E
  Hard drive: Toshiba MK3252GSX 320 S - ATA
  Driver used: raid-drv - 20071023162302.zip (from Toshiba)
  Toshiba-support document: TSB001272

  For the installation of Windows I used correspondent support-Toshiba-document 'TSB001272' the external driver for SATA. The disk with the driver is used for installation, but the hard drive is still unknown.

  PS: The Linux Suse 10.2 installation runs without problem.

  Question: Who knows the good driver for Windows XP? Thank you.

  Manfred Alpers

  > For the Windows installation I used correspondent support-Toshiba-document 'TSB001272' the external driver for SATA. The disk with the driver is used for installation, but the hard drive is still unknown.

  I think you mean this Toshiba document:
  + How to install Windows XP or Windows 2000 on a Toshiba computer with Serial ATA RAID drives.
  http://209.167.114.38/support/TechSupport/TSBs/all/-TSB001272.htm

  Hey buddy the RAID driver can be found on the Toshiba driver page.
  Use this driver as part of the tool called nLite. You can create a new XP CD and could include the RAID driver using this free tool.

  I did this procedure several times and it still worked!

• Tecra 9100 unrecognized hard drive

  Hello
  If I replace the hard drive in my tosh bios indicates no hard disk is installed.
  The new hard drive is MK2016GAP I tried with and without the master/slave relationship.

  Clues?

  Hello

  The MK2016GAP is a 20 GB HARD drive.
  I searched the Internet for the Tecra 9100 and discovered that the phone comes with 40 GB or 60 GB HARD drive.
  BIOS shouldn't t so no problem with the size of the HARD drive. The size of the HARD drive is certainly supported.

  So I think it's a problem of jumper or you did not connect the disk HARD corectly.
  I put t know how the jumper was set to your old HDD, but you should check the position of the jumper and put it also on the new HARD drive.

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• Tecra 8000 replacement HARD drive

  Hi, excuse my ignorance, but on my Tecra 8000 HARD drive just died and I was wondering if I need a specific replacement player or if any 9mm HARD drive fit in the caddy?
  TFYH

  Hello

  As far as I know this device was shipped with 6.4 GB of HARD drive.
  I found some details on this HARD drive:
  Type: DADA-26480
  Size: 6.4 GB
  Ms: RW 12/13
  Part Nr.: P000257570

  But in my opinion the best way is to contact the service partner. They have more experience and more information.

  Good bye

• Toshiba 500 GB external HARD drive is no longer detected - after only 1 hour

  Hey,.

  I finally got my Toshiba 500 GB external hard drive delivered today. I had no problem setting up and to turn my laptop on, it immediately recognized and I started to transfer things for her.

  However, I accidentally stood on the USB cable to the HARD drive and disconnected. I plugged it in, but my computer did not recognize.

  Nothing I've tried has worked, always, the laptop does not recognize the hard drive.

  Please help, I've only had the one hour thing, and it already does not work! I really hope that I have not only lost £56...

  All advice is appreciated, thanks in advance.

  NEW: My father just tried plugging the HARD drive in the desktop PC is on the ground, and as soon as the USB when it is in the port, you stop the computer... causing him to lose a lot of important business email, he wrote. It starts the computer, the USB and you stop again... and this has happened 3 times until he gave up. What on Earth is wrong with this thing? I've never heard of a USB cable, stop a computer permanently, or a hard drive that does more after an hour of use...

  Post edited by: Sam_V631

  The USB port on the HARD drive may have been damaged and may be causing the PC detect a short power.

  You can try another USB cable? If it is not the cable, then the HARD drive should be sent to a Service Center for repair or replacement.

• New NB550D clean system and TOSHIBA recovery on the HARD drive.

  Hello

  I was wondering, if I install a new clean Win 7 on my NB550D I keep TOSHIBA recovery on the HARD drive and when I need to use it.

  If so, how can I do?

  > I was wondering, if I install a new clean Win 7 on my NB550D I keep TOSHIBA recovery on the HARD drive and when I need to use it.
  You can keep it, but after installation of clean operating system, you will not be able to start the installation of recovery more. Now, when you press F8, you repair my computer option. After the installation of clean operating system this option will disappear.

  What you need to do is to create DVDs of recovery or recovery USB key before you install own OS. Be careful about this.

  Document reading s user manuals. You will find exact description, how it works.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• Hyperic support CPU / hard drive temperature?

  Dear all,
  

  
  

  Is Hyperic supports followed by CPU / hard drive temperature?

  
  

  -

  Sree
  

  Hello

  Unfortunately hyperic is not supported for this metric.

• I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  I have a macbook pro with only 128 GB of hard drive. I installed lightroom and all my photos on an external hard drive. Can I keep my library on the external hard drive also lightroom?

  Yes. Find LR catalog file in Edit/settings/general catalogue. Close LR and go to this place. The catalog file is one that ends by .lrcat - move it where you want. Beside the .lrcat file is a subfolder called Previews.lrdata. You can move, but if you don't not LR will generate new insights. Double-click the .lrcat file in her new home and LR will open with this catalogue. Set preferences in more recent catalogue.

• Satellite C660D - issues with SATA Toshiba MK5065GSX 500 GB HARD drive

  Hello

  I have problems with a Toshiba MK5065GSX SATA 500 GB from a Satellite C660D client.

  Cannot start the machine: was doing a start-up and factory default restore comes up with error, so does not actually load Windows. Therefore impossible to use connected diags. This machine does not appear to be any disk diagnostic on boot options

  Where are the diagnostic utilities to download in order to test the hard drive?

  Thanx

  Hello

  AFAIK, you can't simply make a copy of the recovery on the new HARD disk image and start the recovery image installation. In General, for the recovery image installation, you have bootable recovery media. She may be resumed DVD or USB recovery media.

  On older machines, recovery image was recorded on the second partition of HARD drive. It could be that, in your case, recovery image is recorded on the hidden partition. This title has this restore partition?

  If there is possibility to make the copy of the recovery image, you can try is to check if the method described on http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm will work for you.

  By the way: your client was forced to create a recovery media and create backup recovery image. It is clearly described in manuals s therefore, in General, it is not your problem if you can't access the recovery image.
  In the worst case, you can explain to the client that there is no possibility for you to make the original recovery image installation and you can order the new disc of recovery for him.
  It can be done on https://backupmedia.toshiba.eu/landing.aspx

• Tecra S3: SATA hard drive not recognized after XP updates

  Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
  After the reboot required for updaates windows generates a BSOD.

  I've traced the error and found that the system can not find the hard drive.
  Even when I use the XP cd and restore/repair console without a hard drive is located.

  When I check the BIOS hard drive is there.
  I removed the hard drive and used an external case and determined that the hard drive works fine.

  Hello

  Tecra S3 supports RAID.
  In order to install Win XP RAID driver is needed!

  The RAID driver can be found on the European driver Toshiba page.
  It s a v 1.01.0005 for Win XP.

  You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
  Google for nLite for more details.

  Welcome them

• Tecra 9100 - which HARD drive is bigger than I can use?

  Hello

  I just bought a second hand Tecra 9100 with a 40 GB HDD (not yet received but it is in transit).
  I would like to exchange the hard disk and put a bigger but in one I was wondering.

  What is the largest disk in the BIOS will support?

  Thank you

  Hello

  This forum contains a large number of threads for similar issues.
  Why you n t use the option search and the search for similar topics?

  I found these threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=146617

  Here in this thread someone updated the 80 GB HARD drive
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=76045

• Re: Tecra 9100 - new HARD drive is not detected

  I have a Toshiba Harddisk provide a Tecra 9100. Checking the BIOS it shows "Enhanced IDE", but you are trying to boot from the disc does not work HARD. Even trying to install a new operating system present, that the HARD drive is not detected.
  From the laptop is also very long.
  Any idea?

  Your new HARD drive is larger than 120 GB? The HARD disk controller supports the 28-bit LBA and large drives as 120 GB will not be recognized by the BIOS.

  What you mean with Enhanced IDE? The BIOS recognizes the new HARD drive with model number?

• What would support other mobile next to Tecra A4 my HARD drive

  Toshiba Tecra A4 model number: PTA40E 01500UEN.

  I have a laptop, the foregoing, bought in May2005, so seven years old and starting to show its age.
  I have three hard drives that I use with the laptop, all internal, so I simply unscrew the cover on the underside of the laptop, unplug the internal hard drive and plug it into one of the other drives, according to what I intend to do. All the three internal hard disk are Windows XP, based, but with different applications installed.
  This also works well for me if one of the drives fails. I have two backups etc.

  What I want to know is, what other brand/model of Toshiba laptops would support my drives outside a for like Toshiba Tecra A4.

  Could I connect my hard drives internal on any other laptop model Toshiba and they work very well?
  It s only if and when I buy another laptop if used or new, then I might as well buy a Toshiba laptop that will allow me to plug it into one of my three internal hard drives that I currently use?

  I understand I think laptop internal WHAT BIOS s should recognize the hard disk and the operating system installed on the hard disk. Who else has done and model Toshiba laptops will work with my current Toshiba Tecra A4 of the internal hard drives? Are there, is it possible?

  Thanks for any help.

  Hello

  There are two types of interfaces of HDD: IDE (PATA) and SATA interface.
  As far as I know the old Tecra A4 supports the controller IDE hard disks IDE should be compatible with this laptop.

  In some cases the IDE controller would treat an IDE HDD up to 120 GB because of 28-bit LBA
  Larger hard drives (> 120GB) are supported by ATA - 6 and superior controller for ATA - 6 supports 48-bit LBA.