With wireless connection on battery

Similar Questions

• P100-188 no wireless connection on battery

  My new laptop works perfectly, except when I am running it on battery and I'm trying to connect to the internet. I have a wireless connection, which works perfectly also. When executing a stack, it still says excellent connection, but just won't connect. I tried to call the help line and they suggested reset power options to turn off never to everything, and when it does not they told me to take it back to the vendor to check that the battery cannot provide enough power. Any suggestions for something else, it could be before doing this?

  Hello

  First of all, you should check the WLan card properties.
  Here you can choose the "Advanced" tab
  I think there are a few options to configure the wireless network cards, you should find. Check if there is a power save option or something like that.
  You can turn it off.
  In addition, you should check the updated WLan drivers. I do not know the WLan card that is installed on your device, but you can check this in the Device Manager and then check on the page of the Toshiba driver for the new WLan drivers.

  Hope that helps a bit

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• Problem with wireless connection with HP 3070 B611

  I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

  How to change IP address of the printer in the 192.168.0.XXX range?

  It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

  You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

• Problems with wireless connection in Windows

  I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
  OT: Network network adapter Ethernet NIC wireless networking device

  Hello

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

• Problem with wireless connection on Equium L350

  Hello

  OK, today I went and replaced my L350 which was stolen by a replacement. Previously, I could set up my connection Wireless in a few seconds. Now, I can't.
  As far as I know, nothing has changed with my Sky router, wireless devices can connect to perfectly.

  One thing I noticed was that when I press the FN, I have no F8 option, it goes directly from F7 to F9. I've never had to set up my wireless with these keys FN before, so could I have a slightly different model without knowing?

  I get a light orange next to the switch Wi - Fi on the front, but only when really close to the router. In addition, it turns off when the laptop is put into mode 'sleep' or the lid is closed, something that never happened with my old versoin.

  Any help greatly appreciated, esp that I need this laptop for my degree.

  To be honest, it's very strange question. If your laptop is preinstalled with Image Recovery (factory settings), everything should be OK.

  What is the status of WLAN card in Device Manager?

  BTW: light orange compatible WLAN Card has nothing to do with the distance to the router and it is logical that, after switching mode standby WLAN led is OFF.

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

• problems with wireless connection.i have hp Pavilion dv6700

  I have a hp pavillion laptop with windows vista home premium dv6707. the wireless program is antheros. my router is netgear wnr1000. I don't have internet connection when the ethernet cable is PLUGGED. When I try to connect without cable. I turn on the wireless button. This one is blue (on) and orange (off). nothings so bad at this. made wireless signal discover my internet at home and connect to the router, but here's the problem, IT WONT CONNECT FROM THE ROUTER to the INTERNET. the network and sharing card see the computer that connects with a green line to the network not identified. BUT THEN A RED (X) IN THE NETWORK IN THE WORLD OF THE INTERNET. I click on the (x) to solve the problem, but it is not always correct it. tried to reset the router, address. even tried to disconnect the computer power and the router for 30 minutes. SO WHAT'S THE PROBLEM IN MY COMPUTER? all my drivers/programs/and windows are updated...

  I KNOW THAT THE WIRELESS WORKS WELL BECAUSE WE HAVE AN ANOTHER HP LAPTOP THAT HAS NO PROBLEM CONNECTING TO THE SAME ROUTER.

  Hello:

  I recommend that you check your version of the driver for your Atheros wireless network adapter.

  This is the latest version of HP: 9.20 (March 4, 2011)

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  If all goes well, that will solve connection problems, that you face.

  Paul

• Need help on the issue with wireless connectivity on Win7 - dynamic key exchange did not within configured time

  Hello

  I get below error when you try to connect to the wireless router. It was working fine until a few days back.

  InterfaceGuid {1F8AA774-8AE0-48BA-87EB-5522A6070F3E}
  InterfaceDescription Dell 1540 802.11a/g/n (2.4 GHz/5 GHz) Wireless
  ConnectionMode automatic connection with a profile
  BSSType infrastructure
  Key exchange dynamic FailureReason failed within configured time
  Used 294917
  ConnectionId 0x9

  What is the reason code 294917?

  Any help to solve the problem would be useful.

  Kind regards

  Srinivasa

  Hi Richard,

  Thanks for the quick response.

  I tried diff incl. power options. Nothing has worked.

  Finally, I reset my router unit today and it works now.

  Hope that this issue would not yet :-)

  Kind regards

  Srinivasa

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• Satellite 6100 with wireless connection problem

  I just brought a 6100 Satellite refurbished for children.
  I got a copy of xp pro installed on it and trying to access the Internet wireless, I asks me to enter my network key ect...
  After you enter it I get a pop up message that reads: "network password must be 40 bits or 104 bits according to the network config. This can be entered as 13-5 ascii characters or 10-26 hexadeimal"?
  IM with wide band of sky and the entire wireless on my other computer toshiba laptop was instantaneous. I can't help myself (novice).
  I contacted sky email waiting for response.

  I call (India) and was told that I need service Pack2? I m I downloaded only when getting microsoft updates.

  Hello

  You can check if you have servicepack 2 by right-clicking "My Computer". A window should appear with the 'General tab '. Under "system:" should be an entry with "Servicepack 2". Please check this and give feedback.

  Welcome them

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Slow Internet on a wireless connection on battery

  Hello

  I have HP DV6-6121ee, containing Intel Centrino Wireless N-1030

  When I use my laptop on battery, the internet becomes very slow (I can barely navigate)
  I usually update of drivers by using HP support assistant!

  So please help me to solve this problem.

  Thank you

  Go to control panel, power options, change plan setting, change the setting to power advanced, click on the + sign up to the left of the setting of the wireless adapter, click on the + sign for energy savings, set the Maximum performance mode.

• HP Slate 7 - problems with wireless connections

  I wonder if anyone can help me?

  I had a BT Hub 4 installed last week and my Tablet connected for a few hours and now does not connect to the internet properly.  I already talked to the line of HP technology and changed the terminal settings as they recommend but still nothing.  The wireless menu shows that I am connected to the hub (the signal is white), but the signal at the top of the screen is gray.  I changed the channel and only the value of the 2.4 ghz only hub but still nothing.  The hub itself works very well - I made the connection and check settings and our laptops work well, just the Tablet does not connect... but BT do not support aid in the framework of any other other than Kindle and Ipad tablet.

  According to me, I've tried everything - I have something off on the Tablet, I shouldn't?  I just can't understand it

  Any help would be much appreciated!

  Lin

  I now had to restore the whole tablet - now seems to work very well

• Unable to connect to the network with wireless connection on Windows 7.

  Original title: wireless Internet access

  I have good network and internet connectivity when I am connected via CAT - 5 to my router/modem.  However, when I access the wireless network, I always have good connectivity and access to internet but can't send or receive emails or access Web sites.  My client browser and internet messaging turns just until it times out.  Any ideas on the cause of this problem?

  Hi Michael,

  Thanks for posting on the Microsoft Community.

  I understand that you are unable to access e-mails or browse the site when you are connected using wireless network. I appreciate your time and patience to try to resolve the problem.

  1. What is the brand and model of the computer?
  2. What internet browser do you use?
  3. What mail client do you use?
  4. You receive an error message?

  This can occur due to missing updates, hardware or software problem on the computer.

  Initially, run the network troubleshooter from the link below, go to step 3.

  If the problem persists, then check out the link below which helps to fix the network connectivity issues. Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab4&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Hope this helps to solve the issue if the problem persists get back to us. We will be happy to help you.