Problem with wireless connection with HP 3070 B611

Similar Questions

• HP ENVY 17-j184na Notebook PC: problems of wireless connection on the new laptop

  I bought a new laptop a few days ago and tried to connect to the network without wire in our apartment for 2 days but nothing helped.

  So far, I did the following steps:

  -Restore the system to factory settings.

  -Powercycled the network.

  -Reset the TCP / IP / catalog Winsock.

  -Checked and changed the stop option.

  -Re-installed and updated all the drivers of network.

  -Started in SafeMode w / networking and still unable to connect.

  -Ran all 3 windows solve problems and the problem of internet connection of HP.

  -Updated the BIOS with the latest version of the driver.

  I created my own personal hotspot using my phone and managed to connect very well, so I think that maybe that's a problem with my laptop to connect to my router, but everything else connects very well.

  I have an ethernet cable connected and has associated with perfectly too.

  My laptop is a HP ENVY 17-j184na Notebook PC and my wifi specifications are

  Manufacturer: Broadcom
  Description: Broadcom BCM4352HMB 802.11ac adapter Wi - Fi 2 x 2
  Driver version: 6.30.223.221
  Physical address: 40-E2-30-BF-F0-0D

  Modems are involved as much as I have the following (my apologies in advance, don't know how it's called technically, but it's the same one as in the photo):
  http://www.broadbandchoices.co.UK/guides/hardware/sky-broadband-routers

  I don't know if that helps, but also sometimes the connection does not appear in my list of connections, but it is very rarely, about 3 - 4 times in the last 2 days.

  If anyone could offer advice that could help I would really appreciate it and if someone needs additional information then please let me know (and possibly let me know how I could get this information).

  Thank you in advance for anything

  Hi all

  Problem has been resolved.

  Just in case someone else has the same problem, if you try to connect to a router and it communicates but don't connect does not then it might be a problem with the frequency to which you are trying to connect.

  In this case, my laptop could connect only to a 5 GHz frequency but my router was capable of a frequency of 2.4 ghz, so he was able to connect to all the rest but not that. (Particularly if you use a hub SKY).

  The problem has now been resolved by buying a wireless adapter card that plugs into the USB port. If you don't need to buy a Please make sure that buy you one with dual band capabilities.

  I hope this helps someone in the future!

  Best regards

• Resolved - problem of wireless connectivity "wlan0 link is down.

  Quick update:

  * If you encounter this message, make sure that you are trying to connect to a wireless "N".

  Yes, he is in small print on the box, right, sony will not ask you this when you are troubleshooting.

  * If you rely on Sony for smart assistance, forgetabout it.

  * After the receiver a comment card and to express my disappointment, the call center outsource sent a letter... and when I called to discuss, they were still clueless.

  Sorry, but the support structure is absolutely catastrophic.

  We now return you to your regular programming...

  ----------------------------------------------------------------

  OK, let's go, in detail:

  My Sony dashboard came again, out of the box today. It will connect to my network.

  FYI: My set of skills: I am an engineer of sales network, with an extensive network of Wi - Fi and running in my house.

  After connecting the dashboard and providing configuration information, the message I get is:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  Like others on this forum, it seems that my dashboard won't "handshake" with my wireless router.

  To try to solve problems, I did the following:

  (Slot 0): both my wireless router and my attempt to connect to the sony dashboard are in my home office, so the intensity of the signal should not be a problem.

  (1) check the connectivity wireless on a multitude of home devices: laptop, TV, iPhone, ipad... in short: Wireless works. Both with fixed IP and distributed DHCP address.

  (2) restart my Rosewill RNX - N4, wireless "N".

  (3) allow my SSID be visible (that I found which helped my LG TV to connect during its initial configuration)

  (4) checked my WLAN settings on my router:

  SSID: *.
  Security mode: WPA2 only: personal
  Type of encryption: AES
  Pre-shared Key: v * m

  (5) restarted the dashboard of Sony.

  (6) wireless seems to work on the sony dash, as the configuration screen of the network about dashboard States:
  ______________________________________________

  Network configuration
  Choose a wireless connection

  ..:| (my ssid is displayed)

  MAC address: (my MAC address of my wireless router is displayed)
  ______________________________________________

  (7) I select my SSID (FYI: nobody else displayed) and click (next)

  (8) place comes the next screen:
  ______________________________________________
  Network configuration
  Choose the key to coding (WPA2-PSK)

  HEX)
  (o) ASCII
  ______________________________________________

  I select ASCII then (Next)

  (9) he asked my key, I carefully enter (.. .slightly annoyed that the screen will not edge to allow me to see all the characters that I'm going home)..., then click on (Next)

  (10) I choose Auto IP, as during the initial setup I keep it as simple as possible... and then hit (Next)

  (11) to the top displays the following screen:
  ______________________________________________
  Network configuration
  Confirm settings

  name: (my SSID) (My MAC Address)
  AUTH: WPA2PSK encryption: AES
  key: (poster in my correct key, read and validated twice)
  automatic IP allocation (DHCP)
  _____________________________________________

  Completely satisfied with it, I select (Next)

  (12) the sony dashboard begins its Network Configuration / connection looking for the network and then...

  (13) the following:
  __________________________________________________

  Network configuration
  Failed network connection...

  wlan0 link is down
  did not get an IP address
  Internet is inaccessible
  __________________________________________________

  (14) in an attempt to solve the problems, I also tried to set up with a static IP address:

  static IP address:
  IP: 192.168.15.20
  Subnet mask: 255.255.255.0
  Gateway: 192.168.15.1
  DNS1: 192.168.15.1
  DNS2: 8.8.8.8

  ... and the results were the same: "wlan0 link is down.

  (15) as a final step, I reset my wireless router to have no. SECURITY at ALL. Guess what? "wlan0 link is down.

  At this point, I'm at a loss for what I could do "evil".

  I welcome comments from other users, either to continue to solve the problem or sharing what you did to resolve your issue with connectivity.

  Thank you.

  c.

  Well, here I am, a moth and a half later.

  After speaking to Sony technical support...

  After sending the camera back to Sony...

  After having been informed by Sony that this point had problems, they need to replace parts, AND they were going to send me a new device to save time...

  I get a new, and it has exactly the same features / problem.

  So I try another router, same problem.

  Guess why?

  Because I have my network running "N" and it's a Sony wireless B/G device.

  Anyone who has mentioned in technical support... The point on the replacement due to damaged items was total BS.

  If you have a network of "N", it will recognize your SSID and even to recognize the security there.

  But it does not connect.

  Once I changed to a mixed G/N wireless environment, it connects.

  For example, you might say my own question... should have known.

  However, Sony sells a device "B/G" when almost everything comes standard "N"...

  Not cool, Sony... Not cool.

• J4680 problem of wireless connections

  I recently bought the printer and trying to connect to my wireless network.  I followed the instructions to the letter (twice), without success.  I spent a few hours trying to solve the problems.  A few relevant details:

  1. with the help of VISA Home Premium on computer laptop installation

  2. use FIOS router wireless

  3. I tried to many physical locations of the printer (including next to the router) - the wireless network Test report states:

  No filtering - FAILED

  The signal - VERY LOW

  4. I tried to NETWORK WIZARD to set the WEP and SSID (he still believes only he)

  5. I cut/pasted my page to config the router WEP key

  6. I tried to manually enter an unused IP address subnet mask and gateway

  7. I have disabled the firewall on my laptop with no change in results

  8. I have confirmed the filtering MAC is NOT enabled.

  9. I have three wireless devices throughout my home connected without any problem.

  It almost seems as if there is a flaw with the adapter on the printer wireless.  How the power of the signal to be VERY LOW when the printer is 2 feet away from the router.  When the Network Wizard starts, it locates all the networks without wire around me (which is odd).  I spent reviewing the help articles in support of HP and messages in this forum.

  Any help would be most appreciated.

  Thanks in advance.

  There are a few things to check here.

  First, let's define an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). I think that your router is 192.168.1.2 a.51 as its range.  Choose 192.168.1.100
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the gateway and DNS white. Click on 'Apply' - this part is important!  The page will not respond.  Wait a few seconds, then enter the new IP of the printer to see if it responds to the new IP address.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

  Finally, WEP is not secure and can cause problems with wireless connectivity.  It can be broken with freeware in 10 minutes approximately.  Please turn on your router to use WPA with a password strong character 13 +.

• Intermittent problems of wireless connection in Windows 7 Ultimate

  I recently bought Dell Studio XPS 1645 Windows 7 Ultimate edition. I am facing a frustrating problem with Wi - Fi. The connection is down and reconnect. I have the adapter Intel Wireless 5300 AGN and a router Dlink Wireless G I tried to update the latest drivers from Intel (Driver Version: 13.0.0.107), disabling IPv6 for all network interfaces, configuration of the wireless adapter to only use IPv4 and so on. I have 2 other systems with XP Professional on my home network. As soon as I start my Windows 7 laptop, the chaos begins. The router restarts every few seconds, other disconnected systems and so on. I have not found so far any solution on the internet that could solve this problem.

  Other observations that may help to understand my problem:

  1. once my wireless adapter disconnects, the ping my router fails. It tells me whenever my system is asking for a new IP address.

  2 Event Viewer displays multiple entries, which indicates that the DHCP could not get an address. The error looks like as follows:

  The lease of the IP address 192.168.0.100 to the network with the network 0x00216A934EE2 address card has been refused by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message).
  

  It gets an IP address later, but I do not understand why my adapter tries several times to get a new address every few seconds.
  DHCPNACK is the negative acknowledgement which router returns Win 7 DHCP client. I believe is that the client requests an address that is not available. Why would be client DHCP running on Windows 7 this?

  3. I have a D-Link WBR-1310 wireless router G with the latest firmware. Web sites of the reports that it is compatible with 32 and 64-bit Windows 7.

  4. I see no problems with the wired connection.

  As I type this, which could take a few minutes, my wireless connection rolled 7-10 times. All ideas, experts?

  If you need more information, let me know.

  I was able to find the main cause of intermittent disconnections on wireless interface. According to the information I have collected on internet forums and my research, I did as a result of configuration changes that have stabilized the connection. These settings work when you have N wireless adapter and a B/G Router:

  The wireless adapter settings:
  
  The driver for the most recent driver update.
  Access the properties of your adapter wireless network and sharing Center.
  Click on "Configure" and select the "Advanced" tab Make sure the following is in place:

  1 channel 802.11n for bands of 2.4 and 5.2 width are set to 'Auto '.
  2 disable 802.11n Mode
  3. Ad Hoc channel 802. 11b / g should be 1 or even that you have configured on your router.
  4. Ad hoc QoS Mode, keep WMM disabled - disable the router too. My wireless connection is stable once I made this change.
  5 fat Channel intolerant - disabled
  6. mixed mode protection - RTS/CTS enabled
  7 roaming aggressiveness - the lowest
  8 flow Enhancement - active
  9 transmitting the power - low
  10 mode wireless - 802.11 g

  Uncheck the box "Allow the computer to turn off this device to save power" on the tab "power management."

  Other Configurations:

  1. disable IPv6 completely. Uncheck 'Internet Protocol IPv6' in the wireless connection properties window. Repeat this for every other network connection you have.
  2. make sure you have the latest firmware installed on your wireless router.
  3 CTS Mode should be disabled in the configuration of your router 'Advanced Wireless' auto and WMM function.
  4. use only the WEP or WPA Wireless Security. Other methods have problems with 802.11n adapters.
  5. do not disable broadcasting of the SSID of your router. You don't need when your network is secure.

  I hope this helps.

• How to solve the problem of wireless connectivity

  I tried to use the wireless internet connection, but the network signal showing me a full signal with the operating state. I also tried to use the troubleshooting connection, but for me there is no problem stating. But still, I can't access internet, the status of browser simply open and display a "pending to connect. I went to cmd and it is what tells me

  "Microsoft Windows [Version 6.1.7600]."
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\User>ipconfig/all

  Windows IP configuration

  Name of the host...: Benjamin
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : BE-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Wireless Network Connection 2 wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Ada Atheros AR9002WB-1NG wireless network
  pter #2
  Physical address.... : 9C-B7-0D-28-4D-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv4 address: 192.168.1.169 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DNS servers...: 213.55.96.166
  213.55.96.148
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : DC-0E-A1-3D-3C-D1
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {EF78D66C-9571-412A-B8AB-7D37EB0F2330}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:9 d 38:953 c: 20 c 4: 3faf:3f57:fe56 (Pref
  made a mistake)
  Address IPv6 local link...: fe80::20c4:3faf:3f57:fe56% 18 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  "C:\Users\user >.
  Can someone help me in this problem. Thanks in advance for your kind and favorable response

  Hi Bini,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problem with wireless internet connection in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• Qosmio X 70-problem of wireless connection

  Hi all

  I had quite enough of Windows 8.1 on my laptop X 70 - a Qosmio computer, so I decided to get rid of Windows 8 and installed Windows 7 Ultimate.

  Since the installation of Win 7 my wireless NETWORK card connects to my network, then falls from time to time and takes forever to reconnect.

  I installed the drivers from the Web from Toshiba site for their work and the problem started. This then lead me to install Intel Driver Update Utility 2.0, which recommended an update I installed. The WIRELESS network is always intermittent. It is not my router as my iPad and other PC can always access the internet,

  * My Toshiba: *.
  + Part Number: + PSPLTE-098052EN
  + Serial number: + YD031932C

  + WIRELESS adapter +: Intel Wireless - N 7260
  + Hardware ID: + Ven_8086 Dev_08B1
  + Current driver: + 17.13.11.5

  I checked in Device Manager power management is disabled for this device.

  It's crazy, any help would be appreciated.

  Ave you noticed this problem using decision-making power and portable with battery power?
  Check the advanced power settings in the power profile that you use, and set options for wireless network for maximum performance.

  Test it please and post comments.

• Affected by the problem of wireless connectivity. I don't remember the network key.

  I unhooked computer for diagnostic purposes.  Everything was OK.  However when I reinstalled I couldn't access Internet Explorer... System has requested a network key.

  The key is what you have created, be it on your router.  If you don't remember it, reset your default router.  The router manual will tell you what is the default value.

• I have windows 7 and how to remedy a wireless connectivity problem when it; s a problem when it has detected the wireless adapter or access point

  I have windows 7 How to deal with a problem of wireless connectivity. The problem according to the diagnosis of computer's wireless adapter or access which was detected point

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• wireless connection drops randomly

  Hello

  Last month I bought a new DV7-3128eg with windows 7 Home premium

  It has a Broadcom 43225 WLAN adapter

  my connection keeps away randomly

  -l' laptop is very close to the wireless router

  -l' event viewer doesn't watch any errors synchronized with the fall of connection

  -the wireless card driver is updated to the latest version 5.60.350.6 dated dated 22/03/2010

  -windows updates are turned on and that the OS is fully updated

  Please let me know if you have an idea to solve this problem

  the fall of connection takes place mainly during high internet usage (browsing, Skype video calls youtube,...)

  Thanks in advance

  Bouaké

  Finally, I read an article about my problem

  They said that the problem is in the 'Computer browser' service, which is used to keep compatibility with the old XP sharing scheme

  -J' disabled 'computer browser '.

  -order of the residential group as well

  and I am connected from 2 days without any problem in wireless connection

  Concerning

• Dell Inspiron 7537 wireless connectivity does not

  Hi all

  I bought Dell inspiron 7537 and I am facing a problem of wireless connectivity since I've updated its build-in windows 8 to 8.1. Will not connect wifi or Bluetooth. I also tried to plug a device external wifi but it dint work. Even I've updated to windows 10 and eventually I reinstalled Windows 8 and Windows 7 but still the wifi adapter does not work.
  I installed the drivers a lot but this question is never resolved.

  I find a cross mark on my network icon to the right of the taskbar, and it says not connected to any network.

  Please help me with this issue I am unable to use the wifi even in this brand new machine.

  Thank you.

  Thank you very much for your reply, I installed Windows 7 on this computer. Now wifi is enabled :), but I'll try your suggested solution for Windows 8 and Windows 10

• Wireless connection disappeared after update wireless connection device

  Hi, I can't connect to any WiFi recently on my computer laptop so I did a little research on the internet and discovered that keep the device wireless to date is one of the solutions. But after I updated it my laptop have a bigger problem, my wireless connection is totally absent. Until it isn't "manage wireless connections" on the left side of the network and sharing Center , but has now disappeared, my "change adapter setting" to have a WiFi connection , but now also disappear. My laptop is Windows 7 and I have attached a screenshot here for your better understanding. I'm not an expert in computers, so please respond in detail as you can, thank you.

  

  

  

  

  

  Thanks PML and GTS-NJ for your good answer. I solved it by downloading the drivers the website of the manufacturer of my laptop's wireless and re - install all drivers wireless.

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• Satellite L100 - connection problems with a wireless internet connection

  Hello

  I had some of my Satellite L100 connection problems to my sky wireless broadband connection. My laptop detects the connection and I have a bubble appears confirming that the wireless connection is connected. However, when I open internet explore it appears with 'cannot display the page'.

  Now, the wireless works with our other non-Toshiba laptop so I know that the connection is ok but it does not connect with my Satellite. Is there something I can do?

  Try reboot you the router. In many similar situations, it helps me.

• Problems of sudden wireless connectivity with Qosmio G10

  I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

  Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

  Initially, the problem could be solved by restarting the computer and the router.

  Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

  Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

  I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

  I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

  Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

  Can someone please help?

  Why use the CnfigFree tool to connect to the WLan?
  According to your message, you are using the Intel card.
  I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

  > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
  I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

  However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.