Withdrawal & quot; model & quot; restrictions

Similar Questions

• Cannot use Internet on the VPN connection

  Hello

  I used a cisco customer version 4.0.3 installed on my laptop to connect to the VPN server.

  When my VPN client is connected to a remote VPN server via a wired LAN to my site office, I can't use the Internet at the same time. I have him this might not be possible unless "split tunnel" is allowed in the side server. When I connect to the server via the Wi - Fi network in the same office, I can use the Internet. It made me confused, so I checked the IP address of my network bridge by using the command 'ipconfig '. He showed the two IPS 10.100.128.1 and 10.100.128.2 for the wireless network connection and a single IP 10.69.225.70 for the wired network connection.

  How can you explin the situation of the two above? Two default gateways allowed me to use the Internet when my client is connected to the server through the network wi - Fi? The disable "split tunnel" function in the server VPN has blocked me form using the Internet, the connection to the server via the cable network? I don't think so. Why?

  When my client is connected to the VPN server over the network domestic Wi - Fi home that has only a single default gateway, 192.168.0.1. I have no problem with the use of the Internet. How can you explain this bizarre situation? I really want to use Internet through a wired network and wireless at the other site office who have only one gateway respectively. Could you explain that?

  Thank you very much... Jae

  You are welcome, I hope we can fix it all.

  ComboFix set malware entries that could corrupt your browser for a malfunction. WinSockFix to fix corruptions that may have caused by the VPN software. But I'm not a type of corruption is likely to not do not work and https http to work.

  Now, let me understand the current issue. You cannot connect to the internet even the VPN is disconnected correct?

  I have a few questions and need of some outputs of diagnosis

  (1) I think that you are in a hotel. Using wireless? Can it be quota restrictions by the hotel management?

  2) connect via VPN. You have established the connection, my neighbors network at the office with the right button > properties. Now, right-click of Cisco VPN Adapter, and then click on repair. And then disconnect your VPN client

  (3) once you disconnect a VPN, do the repair, even for your Local network connection or a wireless connection. The VPN is disconnected, run the following in the command line

  Nslookup

  www.Google.com

  then run

  tracert 64.156.132.140

  then run

  impression of the route

  And after the output of these commands here.

• writing Arabic or Urdu in Texfiled using flashCS4 and AS3

  Can we use the framework text to write the text of Urdu or Arabic in the input field. Using left to right direction as Urdu is written. How can we import Urdu text or Arabic in the demo of text frame, I tried, but it did not work...

  You can see a known bug with inputing text in Flash Player 10. According to the language and platform you are using, some complex scripts can now be typed (although they can be displayed).

  Our release notes:

  Quote:
  Restrictions on the entry of International Scripts keyboard: some international scripts using the Unicode encoding cannot be seized in Flash Player 10 on Mac OS or Windows. While all writing scripts supported by Flash Player 10 can be displayed correctly, an entry to the keyboard for some of these scripts does not work. Keyboard input will work correctly for writing several scripts including Roman, Chinese, Japanese, Cyrillic, Central European and languages on Windows and Macintosh. On the Windows platform, typing works correctly only for writing scripts such as Arabic, Hebrew, or the Thai who have Windows code pages.

  Is that what you're looking for?

• Disappointing: HP photosmart premium c309a wireless configuration problem. lack of options.

  just bought the HP309a the other day. Love the exit but looks like I have to go back. The printer has ZERO flexibility and configure for wireless connectivity.  You MUST USE the WEP key index #1 to connect.  It does not to adjust the settings to match your existing network.  Where I am, I almost10 running wireless networks where I live.  I use/need a key for more security.  My PSC 2510 old gave me the flexibility to adapt.  Help support told me that's about it... Could someone find a way?  The parameters to record your IP address manually are also very restrictive.

  I'll have to return the printer.  I wouldn't change my existing network (running 4 computers) just to correspond to 1 printer. Not sure why HP has realized this newest model so restrictive.

  Ok. Then temporarily connect the printer to your router using an ethernet cable. Now you should be able to access the Printers page, then run the Wireless Setup Wizard. To know the IP address of the printer, press Setup > network settings > view network settings > display wired summary.

• The ABS function and the sum at a time

  <? If: sum (ARCH_AMT)! = '0' ? >
  
  We used above condition in the model to restrict the data to date, but we were faced with a new problem when ARCH_AMT is to have several lines with the same amount but + ve and ve - that is to say 500, -500, is the sum and do not return data given that the sum would be zero.
  
  We do ABS (ARCH_AMT) before making the sum that the SUM will be thousand and data will be collected.
  
  Please suggest how can we have ABS and the sum at a time
  
  I tried
  
  <? If: sum (ABS (ARCH_AMT))! = '0' ? > and also choose the conditions and it does not work.
  
  Thanks in advance.
  
  Kind regards
  Mahi
  
  Published by: mahi4luck on March 28, 2012 02:33

  store ABS (ARCH_AMT) in a variable and use this variable in a total cumulative

  example:
  Suppose I have a structure xml like this:

  
  
  -500
  
  
  500
  
  

  
  

  
  
  
  

  Total:

• Hi all, I have a question re registration quote models.

  Hi all, I have a question re registration quote models. I do a site that uses the e-commerce module. The products are mainly for mining companies, so will never be sold online because they are huge. We would like to use the eCommerce module to quote however. We hope that the presentation of the initial quote of the user to have the empty fields price, at the present time, that they are filled with $0.00 but the quote sent from the CMS to be filled with the price. I can do this with a few JS, but I was wondering is it possible to have two models of quote. One filled by the customer with the order and a message like "Thank you we will be in touch" and the exact quote, sent to the MSC to be listed and side elements course.

  Hope that makes sense, thank you in advance for advice or information.

  So it turns out that I was getting the wrong direction. A friend told me that you can have a model personalized for each change of status message. And you can create as many changes as you wish.

  I think that this flexibility is one of the great things about BC. There are always several ways to solve a problem.

  So, we made a generic message for the initial quote of welcome template and have the custom business models via the change of order status that guide the user completely BLAH registration to payment.

  Good looking!

  Hope this might help someone else.

  See you soon

  Stuart

• Edit &amp; quot; New model of Document &amp; quot;

  IK work with Dreamweaver much (CS3) and I create a large number of sites. All sites, has the same folder structure.
  
  Is there a way to change the 'New Document' model for us are going to say... default css/javascript includes (link tags and script) and just a basic html layout (wrapper, header divs, etc...).
  
  I was also wondering if it is possible to create a standard folder structure automatically when you set up a new site within the DW? I still have the same structure so it would be great if I could skip the step for those create manually.
  
  Greetz,
  
  Wizz

  The default files are here-

  Find the folder-

  C:\Program Files\Adobe\Adobe Dreamweaver CS3\configuration\DocumentTypes

  and copy it to this folder-

  C:\Documents and Settings\\Application Data\Macromedia\Dreamweaver
  9\Configuration

  (these files are normally hidden - you may have to use Explorer > tools >)
  To view the Folder Options)

  You can edit the files in the DocumentTypes folder in the second
  path to contain any markup you want.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "CssWizz" wrote in message
  News:f3eb27$39N$1@forums. Macromedia.com...
  >

  Quote:
  Posted by: newsgroup user
  > When you PRODUCE. New > basic HTML, you wish that the page that opens to
  > contain
  > all your standard stuff? Of course - you can do it. What is your operating system?
  >

  >
  > That's exactly what I was looking for... I have Windows XP Pro (please don't)
  > punish me! 8 P)
  >

• Model form for National quote for sellers

  Guys and girls,

  My thought is to make a quote PDF form can be used by our sales guys. Here are the reasons:

  • Consistency
  • They often need to combine quotes with brochures pdf
  • Brand protection

  Here are my questions:

  1. Once completed, can my sales guy save as static to offer to the customer?
  2. Form fields allow the bullets?
  3. What is possible with distribute them?
  4. What is possible with the shipment?

  When a form is flattened with Acrobat, the appearances of form field are part of the normal page content and interactive fields are deleted. It just seems like it did before it was flattened, but the user is therefore more able to interact with all the form fields. You can flatten in Acrobat, use PDF Optimization, control upstream or JavaScript. Here is a link to a utility JavaScript that you can install and test: http://www.uvsar.com/projects/acrobat/flattener/

  If you set read-only fields, it will look as it did before. It would be easier for someone to change the contents of the field, which often makes this approach less desirable than the flattening.

  When the last field of digital signature in a document is signed, the user has the option of locking the document. You can also preconfigure a digital signature field so that it locks the document at signing, it is just a bit of JavaScript.

  When you distribute a form, the idea is he gets sending to multiple recipients, usually by e-mail, so that they can complete the form and submit/email the form to you. You don't have to do unless you want to use the data collection mechanism that is built into Acrobat (Tracker).

  A form can be implemented to only submit form data to a web server, and among the options of data format is "HTML", so the data is sent in the same way as an HTML form.

• &amp; quot; This change would require an amendment to the code that is locked by a model or a translator. &amp; quot;

  I'm creating a template. As I go along, I test by creating, editing and saving pages made of him.
  
  All of a sudden, I started getting this error when I try to apply a CSS style for the editable region of content.
  
  "This change would require changing the code that is locked by a translator or a model."
  
  This will not occur when you change the other editable regions.
  
  I did a search of this forum and tried the suggestion to remove the founder of page which has not made a difference. I don't want to remove the CSS because I'm precisely apply a style to text in this region.
  
  This started happening a few hours ago and it does not in itself unfortunately.
  Thanks in advance for any ideas.

  For what it's worth, the culprit was the inclusion of the editable area
  IN a tag, i.e.,.

  
  ALT ="" width = "435" height = "1" / > "
  
  
  
  

  Since is an inline tag, and the editable region is * INSIDE * the
  tag Inline, you cannot paste block tags in there. This is what has been launched
  the error and why it has happened when you tried to change this
  region.

  The same thing would have happened if this interval had been a

  tag , or
  also, since you cannot paste block tags in their midst, no more.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "buttercupnli" wrote in message
  News:eqdp84$D3K$1@forums. Macromedia.com...
  > Well, this is now fixed! I have rebuilt everything again from scratch. There now
  > work
  > fine.
  >
  > That devil knows what was going on...
  >
  > Thanks for your help ACE. I hope that I never see this bug again. But anyway,.
  > I am
  > scared I'll...
  >

• Model &amp; quot; not found &amp; quot;?

  Typical story; inherited from a site that has a dozen FW files, template with a SPACE in the name (grrr) and now when I try to change something by using edit template, it says it is not found that there is a record of models with the .dwt file named exactly the same thing.
  
  How can I get a file to recognize the template file that exists?

  I just spent it and used TextWrangler to force the fix. Thanks anyway.

• Binding data model with a &amp; quot; for in &amp; quot; loop

  I have a model of data representative of the form elements. The item element and shape the data model looks like this:
  < data_model >
  < item_1 > {item1.text} < / item_1 >
  < / data_model >
  
  < mx:DateField id = text = "{data_model.item1}" / "item1" >
  
  I retrieve data from a database in an associative array and convert it to an ArrayCollection collection as follows:
  
  formData = new ArrayCollection (ArrayUtil.toArray (re.result));
  
  Now, if you do:
  
  data_model.item_1 = formData ["item_1"];
  
  the text of the form element item1 updates I expect through the connection between the two. If I browse the table as such:
  
  for (var key: String in formData) {}
  data_model. Key = formData [key];
  }
  
  the model is updated, but the form element text field is not. I would love the convenience of iteration on the table instead of having to type by hand all the model elements. Ideas?

  Figured it out. Instead:

  data_model. Key = formData [key];

  follow these steps:

  data_model [key] = formData [key];

  So stupid

• NavBar links non-existent research &amp; quot; Models &amp; quot; Directory

  I created a master model with a navigation bar and all my pages on this basis. Now, when you are in one of the pages and that you click a link in the navigation bar, it returns a "file not found" error because it is looking for the page in a Templates directory.
  
  The code in my main template follows a direct path. But the code locked in my other pages inserts this detour of templates. Updated pages does not help.
  
  I can detach the model, remove the offending code, but if I reapply the template, the deviation of the dead-end then comes back.
  
  Sigh.
  
  http://www.westendpress.org

  Open the template.
  Fix all the links so that they work IN the model.
  Save and update pages.

• Get java &amp; quot; System.out.println &amp; quot; content in a CF model

  All,
  I am a newbie to CF/JAVA integration and inherited about 20 java applications that are called from a template CF. abounding in all the java code (in hundreds of places) it is System.out.println () statements. So far I have not been able to get this output to display on the web page.
  
  CF Code:
  
  < CFSET UploadName = UploadsDir & "-" & cffile.serverFile >
  < CFSET ExceptionName = UploadsDir & "-" & ExPrefix & BaseName >
  < cfobject type = 'java' name = "UploadObject" class = "UploadProgram" action = "crΘer" >
  < cfset params = ArrayNew (1) >
  < cfset params [1] = UploadName >
  < cfset params [2] = ExceptionName >
  #UploadObject.main (params) #.
  
  Excerpt from Java:
  
  System.out.println("");
  System.out.println (recCount + "entry" records);
  System.out.println (hdrCount + "header");
  System.out.println ("good" account +);
  System.out.println (errCount + "bad");
  System.out.println (ignCount + "ignored");
  System.out.println("");
  System.out.Flush ();
  
  Any help will be appreciated. Thank you!
  
  

  I have it!

  I finally understand how to redirect the output stream, then return the var. toString().

  Java:

  public static main (String [] args) String
  throws the Exception
  {
  ByteArrayOutputStream outstream = new ByteArrayOutputStream();
  PrintStream ps = new PrintStream (outstream);
  System.setOut (ps);

  If (args.length< 1="">
  {
  System.out.println ("use: java InetLoad inet_sales_spreadsheet");
  Return (outStream.ToString ());
  }
  inetLoad.run ();
  Return (outStream.ToString ());
  }

  CF:

  
  #UploadObject.main (params) #.
  

  Time for a beer.

• Redirect model engine URL with quotes button: problem

  Relatively new to Apex, I want a my page has a button that performs a redirection to a URL that links to a Cognos report.
  
  That URL, however, contains citations and it appears javascript has problems with it.
  
  Even if I use substitutions as the name % 3d % 27report1% 27 that it always fixes in javascript ('http://cognos...bla...name= 'Report1'...')
  
  Could someone give me a quick pointer? I think I might have to use a different type of button, but I'm wrong how to fill what attribute so that it points to my URL.
  
  Much appreciated,
  
  Marco.

  Marco,

  Good to see another person who uses Cognos :) (and Apex!)
  I've done this before, but had the URL in my sql/report...it should, however, be the same for your button... I hope: P

  What I had to do to make it work properly is to use escape characters... If the URL looks like this,

  "http://cognos/cognos8/cgi-bin/cognos.cgi?b_action=xts.run&m=portal/launch.xts&ui.tool=CognosViewer&ui.action=run&ui.object=/content/folder[@name=&# 39;FOLDER NAME&# 39;]/report[@name=&# 39;REPORT NAME&# 39;]&p_Cognos Parameter 1='||VALUE1||'&run.prompt=false"
  

  "Also, make sure to remove space in".

  I hope this helps.

  ****
  Try this on your button

  JavaScript:popupURL("http://servername/cognosisapi.dll?b_action=XTS.Run&m=Portal/Launch.XTS&UI.Tool=CognosViewer&UI.Object=/content/package/Report&p_ionummer=&P8_NUMBER.");

  -Chris

• Keyboard does not appear the correct symbol. for example, shift2 displays quotes and not the symbol in

  When I want to type the symbol - to-.  Or - quotes. They are two-way around. Done on my keyboard I press SHIFT then number 2 and upwards just in quotes. Even when I press shift and the symbol for quotes, the symbol appears. I don't know how to get it back to how it was. Help, please. Thank you very much

  Hello

  Regarding the problem of scrolling, I had a few ideas I wanted to try to see if I could reproduce this as I think this is your problem. Alas, it seems that your problem is not what I think it is or I just can't reproduce it.

  The only thing I can think is that you moved the window so that part of it lies below the taskbar. You move windows by placing the pointer of the mouse inside the title bar and 'drag' the window to a new location. If this is the case, you should be able to move the window again once so that it is visible to all. This link...

  http://Windows.Microsoft.com/en-GB/Windows-Vista/working-with-Windows

  .. .save a guide for Vista but most applies to XP.

  Here are a few troubleshooting steps...

  1. If you hold down the Alt key and press ENTER, the entire window, including scroll bars, becomes visible? ALT-Enter again will put the rear window as it was.
  2. What is the brand and model of your display and what resolution do you currently use? Right-click on an empty part of the desktop background, and then click Properties. Then click on the settings tab.

  Tricky