Without VPN

Similar Questions

• Controller of domain and DNS behind RRAS without VPN connected directly to the internet with a Cisco router

  I hava a ME Cisco 3400 with physical single port available for a cable connection.

  The ISP give me an IP address interface = 89.120.29.89 to act as a gateway to the IP Address of the host, which is provided for in the order 89.120.29.90.

  The host computer is a dual Xeon computer with two NICs for LAN and WAN.

  Fields of application: to install a windows 2008 R2 between public and private network server.

  Even though I know it's not recomanded, I put the DNS role and directories Active Directory roles installed on the same computer, the computer above, (I do not have enough computer for roles different place on different computers)

  The desired configuration:

  To have installed with his roles behind a WS2008R2 has RRAS. without a VPN.

  b with VPN

  and for WAN access for the client computers of the private LAN Windows 7 OS. (The basin of LAN address 192.168.0.1 - 255).

  First step : to have internet access in the browser (I use Google chrome) (without taking into account the DNS and AD)

  Network configuration:

  Map NETWORK WAN, at the top of the stack of liaison in the Control Panel/network connections and sharing:

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  OK, I can browse the internet.

  Second stage. (Consider DNS and Active Directories)

  DNS instaled role for this computer.

  AD installed as a global catalog.

  NETWORK WAN server that is directly connected to the Cisco router:

  Conection area 3

  Properties:

  Client for Microsoft Netwaork: not verified

  Network Load Balancing: not verified

  File and shared printer: not verified

  QoSPacketScheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 89.120.29.90

  Mask: 255.255.255.252

  Gateway: 89.120.29.89

  DNS: 193.231.100.130 my ISP name server address.

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: not verified

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: not verified;

  Use this connection DNS suffix in DNS registration: not verified;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: don't check;

  Disable NetBios on TCP IP: checked;

  Connection to the local network 2

  Properties :

  Client for Microsoft Netwaork: checked

  Network Load Balancing: no

  File and shared printer: checked

  QoS Packet Scheduler: not verified;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4 checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  NETWORK LAN CARD: 192.168.0.101

  Mask: 255.255.255.0

  Gateway: 192.168.0.1

  under Advanced tab:

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: check;

  Disable NetBios on TCP IP: not verified;

  Install RRAS as NAT (NAT) under any condition imposed by DHCP(not installed) in ideea that RRAS will generate the private IP address of the DHCP allocator.

  In any case, for the beginning, I have a fix IP, do not get IP automatically.

  At this point, it gets the configuration simple posible for RRAS follows:

  3, LAN connection that corespond to the WAN interface IP:

  "NAT configured for the following Internet interface: Local Area Connection 3.
  The clients on the local network will assign the IP addresses of the following range:

  network address: 192.168.0.0. netmask 255.255.0.0.

  After Windows RRAS are open:

  The Network Interfaces tab:

  NICs are enabled and connected;

  UAL remotely & policies:

  Launch NPS,

  on the NPS server tab:

  Allow access to successful Active Directory directories:

  Properties: authentication: port 1812,1645

  kept port 1813,1646;

  on the accounting tab: nothing;

  under NPS policies:

  Grant permission for the RRAS server under builin\Administrator of the accounts;

  On strategy and the type of server unspecified (NAT do not exist as an entry in the drop-down list server dwn)

  under the static road: nothing;

  under the IPv4 tab or both are there(there IP) and are up

  under NAT

  Connection to the local network 3: public interface connected to the internet

  enable NAT on this interface:

  under the address pool: ISP addresses public;(two addresses)

  under the terms of service and the ports: Web server: http 80.

  (I have I have a static IP address for the client computer in mind, I set up a single customer).

  At the client computer :

  configured as domain customer and added to the users AD and computer AD

  logon to the domain:

  Local Area Connection

  Properties:

  Client for Microsoft Netwaork: checked

  Network Load Balancing: not verified

  File sharing and printer: checked

  QoS Packet Scheduler: checked;

  Microsoft Network Monitor 3 pilot: not verified

  IPv4                                                     ;  checked

  Pilot a Link Layer Topology Mapper i/o: checked

  Link layer Discover responder: checked

  IPv4 tab

  Host IP: 192.168.0.101

  Mask: 255.255.0.0

  Gateway: 192.168.0.1

  DNS: (auto-add the same to the local machine).

  under the tab advanced

  IP settings : even that, tab IPV4 with automatic metric check;

  DNS tab :

  Add primary and connection suffixes DNS specific: checked

  Add suffixes primary DNS suffixes parents: not verified

  Add this DNS suffixes: no

  Registry deals with this connection in DNS: checked;

  Use this connection DNS suffix in DNS registration: checked;

  WINS tab : enable search LMHOST: not verified

  Enable NetBios over TCP IP: checked;

  Disable NetBios on TCP IP: not verified;

  right now the 192.168.0.101 client cannot connect to internet through RRAS.

  ;

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Remote printing is possible without vpn, or cloud of google?

  I want to print from my network on my pc at home work.  Is it possible to set up without the help of a vpn, or google cloud?  I want to see my personal printer with my network printer.  Is this possible?

  You could do with some remote Busters tools such as remote desktop or some flavors of VPN. Both would require a tunnel through the router in the office.

• VCSC and without VPN VCSe Jabber

  Can these two devices cause the same domain configured?

  Thank you

  Alex

  Yes, its possible.

• Disable without client/browser based VPN.

  Guy of HU,

  I want to disable VPN access without client in our ASA.

  I saw this configuration in ASA:

  WebVPN
  allow outside
  allow inside
  AnyConnect essentials
  SVC disk0:/anyconnect-win-3.1.01065-k9.pkg 1 image
  SVC disk0:/anyconnect-linux-2.4.0202-k9.pkg 2 image
  Picture disk0:/anyconnect-macosx-i386-2.4.0202-k9.pkg 3 SVC
  enable SVC
  tunnel-group-list activate

  I disabled the Webvpn with the command "No webvpn. But it looks like that it deactivated the VPN access without customer and with the customer.

  Can someone help me with this please?

  FC

  Hello

  By default, you would not be able to access without VPN client anyconnect essential you've enabled in config.

  So if you need to disable webvpn access you allow only ssl-client protocol under config group policy.

  Discover this config:

  ASA - SSLVPN (config) # group - polished

  In-house strategy group SSLVPN_ASA ASA - SSLVPN (config) #.

  Attributes of SSLVPN_ASA strategy group ASA-SSLVPN (config) #.

  Split-tunnel-policy tunnelspecified ASA - SSLVPN (config - Group - Policy) #.

  Value of split-tunnel-network-list ASA - SSLVPN (config - Group - Policy) # SPLIT_TUNNEL

  ASA - SSLVPN(config-Group-Policy) # Protocol vpn tunnel?

  orders/options mode group policy:

  IKEv1 IKE version 1

  IKEv2 IKE version 2

  L2TP ipsec L2TP with IPSec for security

  SSL-client SSL VPN Client

  SSL-clientless clientless SSL VPN

  ASA - SSLVPN(config-Group-Policy) # tunnel - vpn-client-ssl Protocol

  But since you have anyconnect essentials enabled in config webvpn you would have no access to clientless VPN.

  He only let you to access the services of the Anyconnect client.

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Vs VPN without client Anyconnect

  Hi guys,.

  On the ASA 5500 series, can someone please tell me if the clientless VPN is identical to Anyconnect? Any help will be greatly appreciated.

  Thank you

  Lake

  Lake

  Clientless VPN is a virtual private network that does not use a client to establish VPN.

  AnyConnect is a VPN client.

  so Clientless VPN isn't the same thing as AnyConnect. On the SAA if you do without VPN client then the user's browser to connect to the ASA, and basically the ASA provides the VPN service through the browser.

  HTH

  Rick

• Why the GET Media Hub launched in offline mode each time that I connect to my VPN company?

  I just installed my Media Hub and am very happy to have it on my home network.  However, every time I connect to my VPN company at work (I work from home all day, every day), he launched the offline media pole.  It reconnects as soon as I hang up the VPN.

  I had other problems with VPN network, such as my * wireless * the printer works not when I am connected to the VPN (HE says it's to prevent the unauthorized access to our internal network).  But it is with a wireless device.  The Media Hub is physically connected via an Ethernet cable, not wireless, so I do not understand why he should have a problem with my VPN.

  Everyone is heading in the same situation?  Solutions/solutions/suggestions?

  Thank you!!

  It's real simple's happening at neworks using VPN Corp.  It deals with security and once you understand that it makes it simple.  Without VPN, you are conencted to your home network.  Call the NetA.  All NetA devices are in the same area code (simple analigy).  Then the PC know how contact on the network of companies IE NetA. OK, connect us to a corp network called NetB.  At this point, all codes of areo change toward a new area code to NetB.  The PC is no longer connected to NetA.  It is a Tunnel. The tunnel goes from your PC via your router to the network Corp and stops there. No connectivity to anything except the PC and the net Corp.  So you lose connectivity to any device on NetA.  Now you are conencted to a different area code.  Once that disconnect from NetB, your connection is restored to NetA.  Just like your experience.  Corp this person not the NetA to NetB connect.  I hope this helps.

• VPN between RV082 and WRT54G

  Hello
  I have problem with connection RV082 and WRT54G via VPN (gateway to gateway type).
  I created tunnel on the RV082, but ofcurse he does ' t work. Firewall on both routers is off.
  My setup
  RV082
  WAN address: 83.15.211.170 (DSL)

  WAN network mask: 255.255.255.248

  WAN gateway: 83.15.211.169

  Local address: 192.168.0.244
  Local netmask 255.255.255.0

  Local gateway: 192.168.0.244
  WRT54G
  WAN address: 95.50.235.202 (DSL)
  WAN network mask: 255.255.255.248 (the same ISP)
  WAN gateway: 93.50.235.201
  Local address: 192.168.1.1
  Local netmask: 255.255.255.0

  Local gateway: 192.168.1.1
  VPN:
  Local group: 192.168.0.0/255.255.255.0
  Remote group: 192.168.1.0/255.255.255.0
  Remote gateway: 95.50.235.202
  Everything seems to be correct, but I can not connect to RV082 to WRT54G. I have no error in the logs. Help, please

  The WRT54G is without VPN router. But there is no VPN capabilities. You cannot configure a tunnel VPN on the WRT54G.

• C6280, win7 cannot print via active network with VPN

  Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.

  Also, via USB on the win7 PC I can print.

  But I can't print via active on the Win7 with VPN network. Without VPN, it works.

  I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)

  It recognizes the printer, the State says: ready, but when I print, I get an error after a while.

  When I stop the VPN, I can print.

  I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)

  any idea?

  Hi ReneH,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• How much max VPN session is my ASA

  This is my version to see the ASA5512 VPN

  "Other peers VPN: 250" means that I can use 250 IPSEC session? If I still use MAX 250 VPN Cisco AnyConnect Secure Mobility Client session?
  "Total peer VPN: 250" means that I can use 2 Anyconnect premium + 248 250 IPSEC or IPSEC session at the same time?

  "AnyConnect for Mobile: Disabled" means, I can't use AnyConnect Secure mobility Client (smartphone apps) connect to the ASA by AnyConnect SSL? Can I use AnyConnect secure mobility Client (smartphone apps) connect to the ASA by IPSEC?

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 100 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: Disabled perpetual
  Counterparts in other VPNS: 250 perpetual
  Total VPN counterparts: 250 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual
  The IPS Module: Disabled perpetual
  Cluster: Disabled perpetual

  THX

  Hello!

  ASA5512 can contain up to 250 concurrent VPN of any type: IPsec Site to Site or IPsec Remote access or Anyconnect SSL VPN or IPsec IKEv2, or even without VPN client.

  This means you can use 2 Anyconnect premium + 248 IPSEC VPN from Site to Site. Or, for example, 200 simultaneous IPsec Site to Site VPN + 25 Client VPN (IPsec IKEv1) + 25 AnyConnect VPN (SSL or IPsec IKE v2). But not more than 250 and then at the same time.

  "AnyConnect for Mobile" is now obsolete. The license for Anyconnect schema was changed in early 2015. You can see the new pattern here:

  http://www.Cisco.com/c/dam/en/us/products/security/AnyConnect-og.PDF

  With the new scheme, if you need to connect mobile devices (iOS, Android and so on), using the Anyconnect client, you just need to have a license Anyconnect MORE for the necessary amount of users/devices. License AnyConnect more open along the lines in the output of the show version:

  AnyConnect Premium Peers : 250 perpetual

  AnyConnect for Mobile : Enabled perpetualAnyConnect for Cisco VPN Phone : Enabled perpetualAdvanced Endpoint Assessment : Enabled perpetual

  But, despite the exit "AnyConnect peers Premium: 250 perpetual", you will have the right to use no more then amount ordered... If you need advanced features, for example, Suite B cryptography or VPN without customer, you must order license Anyconnect Apex for amount of users/devices needed. For ASA5512, you need to order licenses Anyconnect more or Apex, but no more so for 250 users, because ASA5512 can't take no more then 250 simultaneous connections. If you want to use the Anyconnect client for mobile devices and you use IPsec IKEv2 for VPN, you will also need order licenses Anyconnect more or Apex. I hope this helps.

• VPN IPSec & AnyConnect

  We used a traditional customer of the IPSec VPN for awhile in our network and works a lot.  Problems running now with the client vpn on Windows 8 and need an alternative.  I start looking in the VPN SSL without client, but want to ensure that the old VPN not "disturbed".  For people on Windows 7, they want to continue to use the former client.  For people on Win8 but we need another fix.  Mainly use VPN for access to terminals (windows) and server drives (windows).  Suggestions?  Thoughts?  Really appreciate the ideas because I'm not at all familiar with this area.

  Thank you

  For your needs to access the server readers and terminals, I think this based AnyConnect client would be better without VPN client. I have a client who is currently looking at this same question. They were using the traditional Cisco VPN client and are facing problems with the new operating system. They are planning to spend the AnyConnect client.

  I have the traditional client and the AnyConnect client installed on the same PC and installing AnyConnect had no effect on the traditional customer.

  HTH

  Rick

• Site to Site & Dialer Dual Wan VPN

  Hello!

  I have some problems with a Cisco 1941 running 15.2...

  I have two interfaces WAN ADSL (PPPoE Dialer). I want normal Internet traffic through DSL - 1 and VPN through DSL - 2. So I put the default route through Dialer1 and the route heading to the IP of the Brach-Site (R.R.R.R), through Dialer2.

  on the R1: Ping R.R.R.R-> works fine

  A2: Ping Y.Y.Y.Y-> works fine

  R2: ssh Y.Y.Y.Y-> works fine

  so I guess that routing should work?

  but the VPN be established:

  router-wi #show cry sess

  Current state of the session crypto

  Interface: Dialer1

  The session state: DOWN-NEGOTIATION

  Peer: Port B.B.B.B 500

  IKEv1 SA: local X.X.X.Xremote of 500 B.B.B.Bidle 500

  FLOW IPSEC: allowed ip 172.20.100.0/255.255.255.0 172.20.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip 192.168.100.0/255.255.255.0 192.168.40.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Interface: Dialer2

  The session state: down

  Peer: B.B.B.B port 500

  FLOW IPSEC: allowed ip 172.20.100.0/255.255.255.0 172.20.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip 192.168.100.0/255.255.255.0 192.168.40.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Even when I remove the Card Crypto VPN - D1, without VPN can be established. Only when I stop the Dialer1 interface and the default Route also goes throug Dialer2 VPN is properly set up.

  R1 config:

  .....

  track 1 ip sla 1

  period 5-2

  !

  Track 2 ip sla 2

  period 5-2

  !

  crypto ISAKMP policy 1

  BA aes 256

  sha512 hash

  preshared authentication

  !

  ISAKMP crypto key xxxxx address R.R.R.R

  ISAKMP xauth timeout 10 crypto

  !

  Crypto ipsec transform-set esp - aes 256 esp-sha512-hmac VPN_TS

  !

  map VPN crypto -D1 10 ipsec-isakmp

  defined by peer R.R.R.R

  game of transformation-VPN_TS

  match address VPN_1

  map VPN - D1 20 ipsec-isakmp crypto

  defined by peer R.R.R.R

  game of transformation-VPN_TS

  match address VPN_2

  !

  map VPN crypto -D2 10 ipsec-isakmp

  defined by peer R.R.R.R

  game of transformation-VPN_TS

  match address VPN_1

  map VPN - D2 20 ipsec-isakmp crypto

  defined by peer R.R.R.R

  game of transformation-VPN_TS

  match address VPN_2

  !

  interface GigabitEthernet0/0

  Green description

  no ip address

  IP virtual-reassembly in

  IP tcp adjust-mss 1412

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0/0.1

  Wlan (network VPN_1) description

  encapsulation dot1Q 2 native

  192.168.100.2 IP address 255.255.255.0

  NBAR IP protocol discovery

  penetration of the IP stream

  stream IP output

  IP nat inside

  IP virtual-reassembly in

  !

  interface GigabitEthernet0/1

  Orange Description

  no ip address

  IP tcp adjust-mss 1412

  automatic duplex

  automatic speed

  !

  interface GigabitEthernet0/1.1

  Description VPN_2 network

  encapsulation dot1Q 1 native

  IP 172.20.100.2 255.255.255.0

  NBAR IP protocol discovery

  penetration of the IP stream

  stream IP output

  IP virtual-reassembly in

  !

  interface FastEthernet0/0/0

  Description-= DSL-1 =-

  no ip address

  automatic duplex

  automatic speed

  PPPoE enable global group

  PPPoE-client dial-pool-number 1

  !

  interface FastEthernet0/0/1

  Description-= DSL-2 =-

  no ip address

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  PPPoE enable global group

  PPPoE-client dial-pool-number 2

  !

  interface Dialer1

  Description-= DSL-1 (Vdsl) =-

  the negotiated IP address

  IP mtu 1452

  NBAR IP protocol discovery

  penetration of the IP stream

  stream IP output

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  Dialer pool 1

  Dialer-Group 1

  PPP authentication chap callin pap

  PPP chap hostname [email protected] / * /

  PPP chap password 0 xxx

  PPP pap sent-username [email protected] / * / password 0 xxx

  card crypto VPN - D1

  !

  interface Dialer2

  Description-= DSL-2 (T - DSL) =-

  the negotiated IP address

  IP mtu 1452

  NBAR IP protocol discovery

  penetration of the IP stream

  stream IP output

  NAT outside IP

  IP virtual-reassembly in

  encapsulation ppp

  Dialer pool 2

  Dialer-Group 2

  PPP authentication chap callin pap

  PPP chap hostname [email protected] / * /

  PPP chap password 0 xxx

  PPP pap sent-username [email protected] / * / password 0 xxx

  card crypto VPN - D2

  !

  .......

  !

  The dns server IP

  IP nat inside source map route DSL - 1 interface Dialer1 overload

  IP nat inside source map route DSL - 2 interface Dialer2 overload

  IP route B.B.B.B 255.255.255.255 Dialer2 10 track 2

  IP route 0.0.0.0 0.0.0.0 Dialer1 30 track 1

  IP route 0.0.0.0 0.0.0.0 Dialer2 50 track 2

  !

  VPN_2 extended IP access list

  IP 172.20.100.0 allow 0.0.0.255 172.20.110.0 0.0.0.255

  VPN_1 extended IP access list

  IP 192.168.100.0 allow 0.0.0.255 192.168.40.0 0.0.0.255

  !

  radius of the IP source-interface GigabitEthernet0/0.1

  ALS IP 1

  X.X.X.X ICMP echo

  tag Check DSL-1

  threshold of 300

  timeout 500

  frequency 5

  IP SLA annex 1 point of life to always start-time now

  ALS IP 2

  Y.Y.Y.Y ICMP echo

  tag check DSL - 2

  threshold of 300

  timeout 500

  frequency 1

  IP SLA annex 2 to always start-time life now

  access-list 100 remark = NAT Route - Map DSL-1 LCA =-

  access-list 100 deny ip 192.168.100.0 0.0.0.255 192.168.40.0 0.0.0.255

  access-list 100 permit ip 192.168.100.0 0.0.0.255 any

  access list 101 remark = NAT Route - Map DSL-2 ABI =-

  access-list 101 deny ip 192.168.100.0 0.0.0.255 192.168.40.0 0.0.0.255

  access-list 101 permit ip 192.168.100.0 0.0.0.255 any

  Dialer-list 1 ip protocol allow

  Dialer-list 2 ip protocol allow

  !

  10 allowed DSL-2 route map

  corresponds to the IP 101

  match interface Dialer2

  DSL-1 allowed route map 10

  corresponds to the IP 100

  match interface Dialer1

  R2 config:

  ....

  10 VPN ipsec-isakmp crypto map

  defined peer Y.Y.Y.Y

  defined peer X.X.X.X

  game of transformation-VPN_TS

  match address VPN_1

  20 VPN ipsec-isakmp crypto map

  defined peer Y.Y.Y.Y

  defined peer X.X.X.X

  game of transformation-VPN_TS

  match address VPN_2

  ...

  Yes you can incorporate these underneath routes as well on track 2, however track 2 fails, you must have a failover to dsl1 itinerary, with highest should cost 100 road.

  IP route 192.168.40.0 255.255.255.0 Dialer 2 track 2 name VPN-1_to_R2_via_DSL-2

  IP route 172.20.110.0 255.255.255.0 Dialer 2 track 2 name VPN-2_to_R2_via_DSL-2

  Hope that helps.

  Thank you

  Rizwan James
  

  Post edited by: Mohamed Rizwan

• What ports should I use to get the VPN RA worked?

  Hello

  I have a few tunnels l2l. I don't use "vpn sysopt connection permit" command. I prefer to activate the required ports for specific source IP. So they can establish the VPN tunnel with me.

  Recently, I have configured remote access vpn. It is work very well... But only when I activate "vpn sysopt connection permit.

  Question:

  1. what ports need to be activated to get RA VPN work? (without vpn sysopt connection permit)

  2. How can I restrict the access of remote when clients they connected to my private network?

  Thank you

  Leo

  Hi Leo,

  When you are not using 'connection sysopt... '. ", you must explicitly permit udp 500 and udp 4500, traffic esp on the outdoor access list.

  Let's say that public intf outside ip address is x.x.x.x and pool customer, we use y.y.y.0 and you want to allow 'only' traffic for port 80 through the tunnel.

  In the ACL on the outside, you need the following instructions:

  access-list 101 permit udp any host x.x.x.x eq 500

  access-list 101 permit udp any host x.x.x.x eq 4500

  access-list 101 permit esp any host x.x.x.x

  access-list 101 permit tcp y.y.y.0 255.255.255.0 eq 80

  access-list 101 deny ip 255.255.255.0 y.y.y.0

  * Please indicate the post if it helps.

  -Kanishka

• Remote VPN: split tunnel filtering

  Hello!

  The question is about the split tunnel filtering capabilities without using the vpn-filter.

  Suppose, we have ASA configured for remote VPN tunneling with split without VPN filter.

  • 10.0.0.0/8 is the private netwrok.
  • 10.1.0.0/24 is the private network, defined in the split tunnel
  • 172.16.1.0/24 is the VPN SECURE network

  When the remote client connects, it receives the routes to the private network (10.1.0.0/24).

  What happens if the remote client adds the route to a private network (which is not defined by a tunnel of split) by itself (e.g. 10.2.0.0/24)?

  Our test LAB, we can see that the customer does not have access to 10.2.0.0/24.

  Where the place in this case filtering?

  • By default, all vehicles coming from VPN, bypasses all ACLs configured on interfaces ASA.
  • Filter VPN is not configured.
  • Nat0 don't traffic 10.0.0.0/8 to 172.16.1.0/24 NAT
  • of the sh ip cry his on the VPN server, we can see, this ident is 0.0.0.0/0
    • local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
    • Remote ident (addr, mask, prot, port): (172.16.1.1/255.255.255.255/0/0)

  The ACL of split tunnel is capable for remote client traffic filtering?

  I understand that your question is in what regards the IPSec VPN Client, no AnyConnect VPN Client, however, I think that the behavior of the split tunnel is the same.

  Here's the answer to your question:

  https://supportforums.Cisco.com/docs/doc-1361#Q_How_does_the_AnyConnect_client_enforcemonitor_the_tunnelsplittunnel_policy

  A. AnyConnect applies the policy of tunnel in 2 ways:

  Monitoring of track 1) and repair (for example if you change the routing table), AnyConnect will restore it to what has been configured.

  (2) filtering (on platforms that support filter engines). Filtering ensures that even if you can perform a kind of injection of the route, the filters would block packets.

• VPN client works well, but I am not able to open the desktop remotely

  Hi all

  I configured a router 877 with features of firewall and VPN and DDNS, when the user connects his WAN pc via VPN all works well (mail, telnet, ping, LAN access) but the Remote Desktop feature is not available. I traced with wireshark and saw that the request to port 3389 was correctly sent to the destination server, but the response to the VPN client has been abandoned by the router... and I have no idea how to solve this problem.

  Can someone help me...? Thank you very much.

  Ilaria.

  In room router attached.

  Your problem is the NAT-config. First of all, the next line is not necessary that RDP does not have UDP ober:

  IP nat inside source static udp 192.168.10.136 3389 3389 Dialer0 interface

  Then, the following command causes problems:

  IP nat inside source static tcp 192.168.10.136 3389 3389 Dialer0 interface

  With which the router assumes that the server 192.168.10.136 must always be reached through the IP address of dialer0 and made a translation.

  There are two ways to solve the problem, but they all have some disadvantages...

  (1) only access the server through VPN. For that you can just remove the NAT statement above (the one with tcp) and you should be able to reach the server via VPN.

  (2) restrict the NAT for not doing a translation if a VPN-peer's access to the server.

  To do this, you must attach a roadmap to the NAT statement. But who does not work with the "interface" - keyword in the NAT Statement. But you can use it if you get a fixed IP address from your provider.

  (3) assign a second IP address to the RDP server. The period of the original INVESTIGATION that is used in the NAT statement is used to access the server without VPN, the second IP address is used to access the server through VPN.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni