WLC Campus Design - 10 controllers etc.

Similar Questions

• How to connect a simulation on the design of controllers to DAQ card?

  Hi guys... I have problems about control and design on the way to the simulation I just do simulation PID and I can not to connect to the path of the simulation DAQ card in the control design (function)... can someone help me how to connect that?

  

  Ayubi,

  First of all, remember that the control and the Simulation has a PID in the Palette "control and Simulation > Controllers.

  Then, to connect to a data acquisition card, you must use the DAQmx interface is there to connect. In general, National Instruments recommends allows you to deploy a controller a real-time system, but most likely your Windows computer should be good enough for your application. Please see the example of the expedition (in 2013):

  C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real - time\DAQmx\RT PXI DAQmx single channel PID.lvproj

  If you don't have a LabVIEW Real - Time (RT), you can simply open the VI:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2013\examples\Control and Simulation\Simulation\Real-time\DAQmx\DAQmx single channel PID.vi

  Remove the shared Variables in the code and he would be executed on a computer with a DAQ card.

  

• Search for blackBerry Smartphones in the industry or company designation.

  Hi all! I'm new to this forum and this is my 1st post.

  I have the Blackberry Curve and I have 2600 contacts stored in my Blackberry. About 10 to 15 days, I had saved very important number, but problem, it is that I forgot the name with which I saved number and is now in trouble to locate this number. But I know that the city, the Qualification, designation and the sector of this person that I want to record detailed information.

  So is there any solution for the contact search in the company name, designation or sector.

  Someone here please help.

  There no solution for searching for contacts through designation, city, industry, etc. in Blackberry.

  But this is possible only if you install a free app called Zebrost www.zebrost.com software directory

  After the installation of Zebrost you can search for contacts across all areas.

  You must try this.

• Where can I download an upgrade of CS5 Design Premium to CS6 Design Premium?

  I'm frustrated with the site - can not find a way to upgrade to CS6 in CS5.

  Go here: http://www.adobe.com/products/creativesuite/design-web-premium/buying-guide-upgrades.html

  in the combobox 'i want to buy', select 'upgrade '.

  in the combobox 'I have' select premium design cs5

  etc.

• How to access the public design OWB views 11g?

  (My apologies if this had been the subject of a debate earlier - I thought all discussions on details if...)
  On Oracle 11G, Oracle Warehouse Builder 11.1.0.7.0 RDBMS
  
  I need to examine the views of design like ALL_IV_PROCESS_TRANSITIONS etc in SQL * more.
  -I login as the owner of the runtime (OWBRTREP) repository
  -J' I run the OWBSYS. WB_WORKSPACE_MANAGEMENT. SET_WORKSPACE ('OWBRTREP', 'OWBRTREP');
  -J' I try:
  SELECT * FROM OWBSYS. ALL_IV_PROCESS_TRANSITIONS;
  no row is returned...
  
  (Granted OWBRTREP SELECT-rights on the view OWBSYS previously)
  
  As a test, I tried questioning before ALL_IV_SCHEMAS and after doing the SET_WORKSPACE and allows to check that it does not return the data before - and returns 4 rows after. So the SET_WORKSPACE works and affects the session.
  
  By browsing the ALL_IV_PROCESS_TRANSITIONS view definitions and underlying views, I end up getting a lot of data in the base table.
  What we are doing wrong here?
  (I know the sql user must be registered to a user of the workspace in OWB and the owner of the repository that I question).
  
  Any indication that can enlighten us on this is very appreciated!
  
  Kind regards
  Haakon

  Hello Haakon,

  Describes the steps in your scenario for me work: workspace layout you should see the contents of all_iv_process_transitions related to this workspace / obtaining of 0 means that you have not any transition.
  You can also try to query the view using the OWBSYS user (as thought that it is the supported way) - just make sure that you set the desired workspace. You can also take a look at the underlying the view definition and make sure that you can see the contents of the underlying tables/views.

  Are you sure that you ask the correct repository/workspace? The all_iv_process_transitions view is supposed to reflect the transitions in the workspace where you design your workflow. I.e. If you use multiple workspaces (for example like separate design & DURATION) - you should question your workspace design, not the runtime one.

  Kind regards
  JAVOR

  PS. granting access to public views OWB to user no - OWBSYS OWB (although not officially supported) could be obtained by OWB$ CLIENT and OWB_DESIGNCENTER_VIEW roles. (The two roles are protected by Word, but you can easily get around that through the third role).

  Published by: javor on October 11, 2009 02:56

• USB works only with different HARD drive...

  Both are Acer Aspire laptops. We have AMD, another, intel. AMD, one died, leaving behind my harddrive perfectly well with all my stuff on this subject. The intel we get my hard drive (from AMD). This works. Only problem: USB ports do not work. Not at all. If I look in Device Manager... There is a label of warning exclaimation on my video display (error code 12. Yet there are a lot of free resources)... and a crapload of all listed Universal Serial Bus ports, with this warning symbol but error code 37. I've exhausted all options on how to 'fix' my problem... but a little problem... I have not met my problem as a whole. Everyone elses problems comes from everywhere to connect to a device USB so he can stop working until an update of windows did. There should be no problem, but it is a. Oh yes, windows 7 x 64 is the operating system. I downloaded and installed all the drivers Acer, except amd... hmm... looking up for this portable body and mind (hdd) that he is supposed to have... idea k. In the meantime, someone knows what to do?

  My old acer aspire has a 5538 (AMD)... new is a 5734z (intel).
  both win7 x 64 OS.
  Other than the display device supposed to do not have enough resources,
  and the multitude of usb drivers failed (there are only 2 ports usb, btw),
  and the former stop cash, while this one is black... they are the same. Same amount of GB, operating system, bios, you name it.
  Guess I'll go back to acer.com and download drivers for the old laptop, see if windows will then expose to correct things.
  It's a good time to go to College and be stuck with buying what they have on campus, huh? Yes, the USB ports are quite necessary for...
  Thank you all for taking the time to listen. Surely someone who reads this has such an experience?
   

  Hello

  Your post is confusing.

  You trying to start in and use the hard disk and the operating system out of the device in a more recent machine broken?

  If so, you cannot legally install and boot into hard drives and their operating systems that have been transferred to another machine, unless you are licensed by the retail, which would require a reinstall anyway for the reasons listed below in my response.

  The two Acers have preinstalled OEM licenses of operating system on them and these licenses are tied to the original machine and are not transferable.

  .

  And the hard drive that came out the breakage of the machine has drivers for the motherboard, etc of the broken machine, not the newer machine.

  So you will be naturally enough have problems of recognition of hardware, including USB controllers, etc.

  And don't you can't change drivers in the old hard drive and the old operating system.

  I suggest that you save your data from the old hard drive and then use it to store data in the newer machine.

  See you soon.

  The person who took my hard drive works perfectly on my old laptop and put it in my new body of laptop is a licensed computer technology. He thought that it should not be a problem even if the chip inside the new case was a pentium from intel.

  He installed all the drivers for the new motherboard laptop on my hard drive. But, the 'graphics card' intel (R) 4 series express chipset family had an error code 12 'lack of resources to operate this view"in Device Manager. And my USB ports do not work, gives error 37 and not all record as that of operation. So I could not use my USB stick for school work done. I got in touch with him. He took my hard drive out and placed a hard drive for acer with processor intel pentium. If it was not so urgent for me to need my computer... I would expect it 3.5 more weeks for an amd processor chipset 'inside' body (case of the motherboard).

  So... now my 'problem' is 'solved' regarding my question went.

• Combine two jpg images

  I try to combine two JPGs as two PDF files into one.

  I have a PDF file with more pages and just add a page at the end. It seems to work. And when I save me it also includes the addition of the page.

  However, I'm now trying to merge two files jpg in the same style. This doesn't seem to work. Why?

  Thank you

  With the help of Pages ' 09 v4.3, you can combine two images, select both, group them, copy to the Clipboard and select new in the Clipboard in preview. They are now in PDF in preview, where you can save, export to other formats or copy/paste in Pages in PDF format.

  I reference the older Pages, because in the Pages v5.6.2, your travel Pages from the Clipboard to the product overview a file of Graphics PNG 72 dpi - not PDF and not the two combined images JPG.

  If you don't have a Pages ' 09 v4.3, you should combine your images in a graphics program dedicated (for example GIMP (free), Photoshop, designer of affinity, etc.).

  You cannot combine images in preview, as you can the PDF. The combination of the image seems to work until you save and view this content, to see that it did not work after all.

• Pre-sales: more possible 64-bit full support

  Hello

  I'm about to buy a laptop (I heard Santa pick up gifts from the warehouse of Toshiba, also) to try to achieve the following objectives:
  I want to run probably the guest 64-bit (Win Server 2008) on VMWare ESXi. It is to install a battery of test Sharepoint 2010beta, which require a 64-bit environment
  I guess and that ' s where you guys come in this, I need not only the CPU to provide 64-bit support, but also the VT CPU and BIOS support technology but also in support of 64-bit chipset, drivers and whatnot.
  I know I should be reasonable and install the package on a small physical server but I'm not and I need to be as mobile as possible in this scenario, so my question is this: which of the portable Toshiba current no matter which model it would achieve for me as the best of your knowledge? As it is almost impossible to ask a dealer to put some test machines I need your experience.

  Any idea? Or questions to the above?
  Thanks a mil for all your comments

  Hello

  You want to buy a Satellite Pro S or why you posted here in this forum?

  I think that this question isn't easy to answer. First of all it s depending on the price I think. For example, Satellite L series you don t have to pay so much money for what is fast Qosmio X 500

  I think you should check the Toshiba page a bit. Take a look at the different models what design you want, etc.
  After that, you can check the specification if they support virtualization for example and on the driver download page, you can check it if you get all the drivers for this model.

  On my Satellite U400, I installed Vista Business 64-bit. Full 64 bit support and all works well enough.
  But there is already the successor on the market: Satellite U500.

• Get data out of a dead A1409

  My 3 TB Time Capsule (model A1409) died this weekend.  I have no lights, but as many others have noted, the HD seems always spin.  But that's all.  I doubt that a power spike has taken, because it is behind a backup battery with surge protection system well, surge protection, etc..   That said, and to counter suggestions from iron soldering, I am not a probably being able to disassemble things, replaced components, etc...   Yet, I'm pretty disappointed by this failure.  And all of this leads me to two questions.

  The biggest question is this: has got apple any better quality/design on these things, or this time I should consider a backup drive and a wireless router not apple?  Right now, money IS a problem for me (sad to say), so if I invest, I want something that won't die because he is in power, or has flaws in design or components, etc..   I prefer to buy something I'll take later out of my network because the technology has evolved, not because he has not (make sense?)  What makes desirable TC, is the Nice packaging and ease of use.  But here, the story seems to suggest I COULD get 3 years out of one of them and then have to redo all.  Apple still cleaned his behavior on this product?   Is there a reason to believe that the latest generation of 3 TB TC is any more stable/reliable than older?

  Second, while I use the hard drive as a backup for time machine target, I DO (?) have some files on there, use it as a server for my office.  Most of the files are no big deal, but there are a few that I want to go back.  (I have backups off-site at home for the time machine backups that I can still use...)  Y at - it a hope of recovering files of the HD on old A1409 (Broken), and if so, what would that take?

  BTW, I use a MB Pro, version end of 2012, using to El Capitan. 10.11.4

  Thank you

  But here, the story seems to suggest I COULD get 3 years out of one of them and then have to redo all.

  A lot of electronics is now designed for a duration of 3 years... modems and routers for home use are at a price... as is the TC. It is not surprisingly when it works 24/7 in a box that is too small and with everything so close to the tolerance they fail after a few years... That's life in the throw away age. Cheap stuff that doesn't last.

  Is there a reason to believe that the latest generation of 3 TB TC is any more stable/reliable than older?

  No, it's the same... but the current is well late replacement, so if you can maintain the broad do so.

  The cheaper alternative is a USB key that you plug into the Mac. It is more reliable and faster than a TC, but long term that bothers.

  The best replacement is a Synology NAS QNAP. You can buy the small version of 2 disc for say $200... and another $ 300 for drives... that puts the price of $500 for a basic model enough. You can buy cheaper single drive NAS as WD MyCloud that do not offer backup TM for a computer. It seems that people have problems with more than a backup. I use synology NAS now and he can back up several computers and has been reliable... However you should not think that it will last forever... the discs themselves are often the weakest link... and you may need to replace the discs after a few years.

  At least they are designed to be repaired and replaced the discs... Apple design the TC sealed and there is no access to anything and without even spare parts.

  Most of the files are no big deal, but there are a few that I want to go back.  (I have backups off-site at home for the time machine backups that I can still use...)  Y at - it a hope of recovering files of the HD on old A1409 (Broken), and if so, what would that take?

  You must buy a USB to SATA disk shell or pregnant. Any big computer store has them. Buy the last type of USB3. They will cost $10-20 for the cheap.

  Some of them may be difficult to use so I recommend you to buy this sort of thing.

  http://eShop.MacSales.com/item/newer%20Technology/U3S3HD/

  OWC tend to specialize in Mac stuff. So you can talk to them and get advice.

  Remove the hard drive from the TC.

  This is a no job soldering iron...

  https://www.iFixit.com/device/Apple_Time_Capsule

  You need a heat gun... (the hair dryer works fine). Heat the rubber mat background full 3 min with a hair dryer on the highest heat and lower air circulation. Carefully take off the rubber... should not be divided... If he catches apply more heat, and no more pressure.

  Then you need a small Phillips screwdriver.

  Remove the 10 screws of 2mm at the base.

  Not just pull the cover up... the fan is connected to the base... Follow the pictures on ifixit site and return the cover so the fan cable is not pulled.

  The hard drive can then be disconnected and came out of the shell...

  Remove the stems of 4 screws from the base of the drive with your screwdriver or pliers if it is large enough.

  Place the disk in the USB case... Plug it into the Mac.

  Your files will be accessible from the Finder now... If you have any questions to talk to me.

  Now, what will you do with the shell...?

  We know in fact the fault is bad solder.

  This is a recommended way to fix it. Just the jury with all removed in the oven and cook... This will achieve a reflow of the solder... and it seems to be quite successful to bring back them to life. YMMV.

  s/apple-time-capsule-repair/gen4-a1409-i https://sites.Google.com/site/lapastenague/a-deconstruction-of-routers-and-modem...

• HP Envy Phoenix 810 - 170st: Startup Hp Envy 810 - 170st problem

  https://www.YouTube.com/watch?v=bmpOezTOfPU

  Greetings,

  My pc is having a serious problem to initialize. When I turn it to be closed, it will not display. The lights come on, but the graphics card is not set up to start the monitor. And the fan is running at its top speed. It will be either do it for about half a minute and close, or should I stop it manually. Usually, the next attempt to start, will show the power comes on for about 2 seconds and then right back off the coast. After that, he goes on, and then will begin a normal start procedure. The problem started a while after obtaining a SSD hard drive.  The SSD is used as primary Windows startup disk and 2 3 TB drives were used for storage.

  The problem is very confused, as one of the 3 TB drives the windows main drive helped, but do not solve the problem. So, I can not link on the SSD drive, running the pc on ACHI vs sound original RAID, or if there is a real problem of power or the motherboard.

  I have a box from looking at it, but this brings us to another problem. I don't have the pc in the configuration that was causing the most problems, because an associate of HP called me, said that if I sent all the additional parts, they would probably not returned. I could lose my extra HDs? And if I can't properly present the problem, is it possible that it can fail, and my machine is back with the same problems?

  SSDS are sometimes a problem and I don't really understand it.  In the early days the cloning software was having a problem with the SSD drive.  Different manufacturers have problems with the motherboard controllers, etc.  Now, I assumed that the problems are more or less solved.  It could be in one of these areas, but check with the Samsung forums to explore options for this SSD model.

• Model number confusion: SA30 - 303 is a model A30?

  Hi all, I have a little constructive criticism on the search for files and model numbers etc.

  My question would be is a model A30-SA30 - 303? the reason for the question is highlighted below.

  Ok
  We have the series: Satellite
  We have a model number: PSA30E-00526-EN
  We also have a code: SA30-303
  We have a serial number: 93787194G

  When I go to download its application files:

  Product type: laptop (that of easy)
  Family: Satellite (wow that's really simple and easy to use)
  Series of products: huh! What's that! I look at the options, but I don't see anything that matches or is clear. OK guess let s; now I use the code without name as reference or model number? Well, he asks the model number on the next line, so I'll go with the code.

  Well can't do the "series because it is not listed, it's ok maybe just indicates it is a satellite, so I'll go to the next bit 'A' Yes, maybe it's the series ok I select this one, I think I'm on the right track, it says A30 and I got an A30 is the code without reference." OK I'll stay with this choice.

  The point I am making; and Yes, I know I used sarcasm; but it a message quite well, is, I still don't know for sure if my choice is correct, it's always guesswork, though intelligent guesswork, but guess work nevertheless.

  I find this a lot on Web sites with access to files, design of society etc. model number for their benefit not customers. And they list products differently, using disaggregated model references that are illogical.

  A better way to proceed is to use the serial number of products etc that it would have all the info that model on this already no need for product name, model family, etc! Using the series would be a much more elegant and precise; especially for the less technically minded of us; Personally, I class myself as a user, so if I have my doubts, so must many other users.

  Even if you do not change the system, at least make clearer research example

  Series of products: SA series, SM series not A series

  Or at least have some gif images showing where to look and what for, i.e. to highlight the part of the number you want, I just make an example which can be viewed here: http://i50.photobucket.com/albums/f349/darkan9el/Forum%20Posts/toshiba_label.gif

  Apologizes if I references are bad, but I m just guessing.

  Best regards lee

  Hello

  I put t know what is the problem. The driver download area is very clear to me and to most users. If you have a laptop SA30 303 so I think everything should be clear. Or not?
  S is average for the Satellite. A is the series of products; Model number 30; 303 is a country specification.
  If you want to download the driver, so you have only the SA30 specification.
  Now, all questions should be clear.

• Alternative to iDVD on iMac El Capitan 10.11.1

  Hello

  Is there an alternative to iDVD.

  I have an iMac new with El Capitan 10.11.1

  I see offers of Wondershare and iSkysoft.   They work properly?   Any experience with any of them?  The one that works best?

  Thanks in advance,

  Appelbum

  The only 3rd party video DVD authoring applications I tired are DVD Maker Pro, DVD Creator Lite and toast.  Each has the one feature which is important to me is the ability to save the project as a disc image, so it can be tested with DVD before trying to burn it to disc.

  None has the versatility of iDVD in the design of menus, etc.

  Follow this workflow to help ensure the best DVD video qualty:

  Once the project you want it save it as an image disk via the menu file → save as Disk Image . It will separate from the process of encoding of the burning process.

  To check coding mount the disk image, launch a DVD player and read it.  If it plays OK with DVD, encoding is good.

  Burn burn to disc with utility disk or toasts to the slowest speed (2 x - 4 x) in order to ensure the best quality.  Always use higher quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are recommended in these forums.

  

• G7-2223nr to downgrade to Windows 7

  So I went down to windows 7 Windows 8 and I knew beforehand that there is that no pilots take in charge of HP for computers laptops windows 8, however I made this 2 times before, but I can't find the chipset drivers for this laptop that needs AMD chipset drivers. Graphics drivers worked at HP, but there is no driver chipset for the PCI device, SM Bus controller, & controllers Universal Serial Bus (USB). I went to AMD, & all I get are the graphics drivers that I already have.

  Anyone know where I can get this chipset drivers please.

  Paviliion G7-2223nr

  AMD a4 - 4300 m apu

  The "example" in my previous post is just that, for example. Your missing or unknown devices may be listed in the categories of Device Manager... IDE ATA/ATAPI controllers, keyboards, mice and other pointing, audio-video devices and game controllers storage, system, controllers Universal Serial Bus devices, controllers, etc. This will normally features a yellow triangle with an exclamation next to them.

  It may be faster to just after the "hardware ID" for these devices as text and then display a screenshoot. Photos may take several days to approve before being assigned.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Smart Web printing network resource error message

  I have a Photosmart C4580 with an OS Windows 7 Home Premium 32 bit

  The problem is NOT the printer, but whenever I boot, I get a pop up saying message box:

  "SmartWeb installation package is not found."

  Followed by:

  ""The component you are trying to use is on a network not available resource ". "

   

  That's happened since I've tried (successfully) solve a problem of a download of HP Solution Center

  
  My browser is Google Chrome and I have not used IE for a few years (IE9 is installed) I've never used Smart Web and have no need for it, so I tried to uninstall it without success.

  The search through the forums, an expert suggested Revo uninstall.  My question is how can I get rid of those annoying pop ups and if I use Revo to uninstall Smart Web will be my other printer be affected software? Example of Solution Center designs and photo etc.

   

  Do you still need help? I read your post to DavidPK and using Revo uninstall on another Board. Looks like he's got your problem taken care of. Is this the case? I wanted to just contact you and verify.

• Export of Configuration MAX?

  I just don't understand?

  What is the point of the feature to import/export of Configuration MAX and why my version of the installer allows (not need) to set?

  We have a project that has been developed on a chassis NI PXI-1044. He now resides in a configuration management system, and sometimes we want to remove to make changes and build on a system that now knows nothing about PXI/chassis/controllers/etc, etc. In fact we have more material. But this Configuration hardware option within the construction of the Installer seems to require a configuration by MAX file on the host system used for the generation of the project. Is no longer the PXI-1044 chassis but another PC altogether.

  Why is this hardware configuration option exists? What is its usefulness when it comes to the installation of an integrated (such as an installation program) project. Why I can't live without it?

  It is perhaps a fundamental issue, but it makes no sense to me. I come from a background of the conventional script-based programming (C / C + c++ / Ada etc.).

  Thank you.

  The hardware configuration is not at all unique to LabVIEW and you also use it with all the other languages where appropriate. The configuration includes the names of devices, custom scales, tasks, etc. Include you the configuration that you have created on the original pc or recreate it on the deployed pc. If you have not used MAX for any configuration, so you do not need to export/import but correct detection name, scales, etc. have all be integrated into the program itself.