WNDR4500 has stopped working. Power blinking green Internet Orange

Similar Questions

• All equipment Linksys has stopped working! But having internet with NO LinkSYS equipment

  My setup is eccentric, but worked for a long time. It stopped working Friday. Let me first say there is a reason why I put in this way. The reason for my configuration is based on the location of the different IP and hardware when I bought at the origin of the material (in case your wondering why I am not a different route). All network card/devices and routers are Linksys. The LinkSYS device not only is a Netgear print server and 1 PCI card installed on a 2nd PC.

  Here is my configuration: A modem high speed, a wireless BEFW11S4 (4 port on the router). 1 unused port. Port 2 of a second wired router (for DIRECTV VOD and VUDU future) across the House. Port 3 to a local PC. 4 port wireless router WRT54G on the end of the House (I used one of the ports not the WAN connection). Wireless is enabled for both routers. DHCP is disabled except for router main basement. I treated all the routers beyond basement one as gateways by saying.

  My problem: I have several PCs with wireless cards / devices. That work is 1 XP Dell laptop, as shown below (not Linksys) and the fact wireless and also via a wired connection. Directv is also wired router (2nd line). The Wii also works or wireless router. Of course, my PC to the first router also sees the internet. All locations to see both routers with 80% of signal. My House is small, but limitations of the wiring, it's the best solution to get internet.

  MY PC, given models configurations are Linksys except as indicated:

  1 PC XP w/WUSB54G (USB adapter)

  1 2000 pro w / Netgear WG311 (PCI card) very old PC and sees no internet, what to look for and find two routers with high signal. Internet has worked in the past, though that is not used for a while. I can possibly assume it just does not work or can also be linked to this issue.

  1 Dell XP with internal wireless (works very well!) Will work with a router wireless and communicates also with print server with success.

  1 2000 pro w/WPC11 PCMCIA card

  1 XP with Linksys PCI card (don't have handy model number)

  I also changed the ports of wireline equipment to check that it was not a bad port. I have an internet connection on non-material Linksys. Some of the computers that I use on a daily basis, others not were lit in a time very long. After the problem, I decided to check these computers also. I did not any changes to the configuration. As I said I came home and noticed no internet and went to fix the problem. I used the Linksys software on all of the products listed to configure the network. (Supplied with each equipment original disks) It will show you, we can see the routers, shows NO internet connectivity but appear sees a router, it is not the internet. I want to emphasize that I did not change any installation, it just stopped without warning.

  Initially, I assumed that it may just be the wire to a router. (WRT45G). I have also unplugged all the material, renewed IP, rebooted the PC and modem repowered. What bothers me is that the DELL works fine, including being able to print, the Wii is very well and speaks and I can renew IP and download VOD since the second wired router and receiver DIRECTV. Also, I assumed that maybe it was a problem with a new patch from Microsoft, but some of the PC were not on months, although until this problem. Thank you for taking the time to read this long post. I tried to be as complete as possible. Any suggestions or ideas appreciated. I have found no solution on this forum or on the internet.

  NOTE: I also reinstalled 2 PC software, including returning my WEP. This has not solved problem either. Problem remains the same. I also checked the internet properties and network configs (on the PC) although I can't imagine every PC has changed itself.

  It doesn't seem to be an adapter or your computer problem, from what you described, I guess that your router has some problems of connectivity... You must reset your router and then re - configure both...

  As you explained that a computer for the first router connects to the internet, you can download the firmware of the router first and upgrade... You can download the firmware here

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Similarly, upgrade your second router and update its firmware... I think that after this, you should be able to get the connection on all computers...

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Microsoft Wireless Mobile Mouse 3500 has stopped working

  My wireless mouse has stopped working. The green light at the top is, but the blue light down below will not be displayed. I can push buttons and he will answer, but when I try to move my cursor I get nothing.

  Hello

  I tried new batteries?

  Looks like the mouse has problems.

  Wireless Mobile Mouse 3500 - has a 3 year warranty.
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck

• Satellite Pro C660 - 16 X - Internet Exlporer has stopped working

  Hello

  Can someone help me here please?

  I have a Toshiba laptop Satellite Pro C660 - 16 X, and about 5 days of internet explore has stopped working completely. I am connected to a wireless system that works well since I am on now computer it works fine. I tried another web browser like Opera, but that does not work either.

  Can someone advise what I need to do to get access to the back of the internet?

  Thank you

  Have you tried to roll back OS to an earlier time using System Restore option?

  By the way: what do you mean with a stopped working?
  This means that some page cannot be opened, or you cannot start IE at all?
  Is there an error message?

  What is with opera? The opera starts it or not?
  How to understand this?
  If you ask something please, offer more information as possible and not a general statement. It can help us better understand.

• Re: Satellite A300-19 t has suddenly stopped working (power led is off)

  Hello

  I have a 19 t A300 Toshiba, model PSAJ4E that I have used for more than 1 year and a half. Yesterday, I just started, started to work for 5 min and all of a sudden it has stopped working and remained silent. I'm not through the shutdown process or whatever it is a software based process, just a hard stop. I don't even have the led power indicator. I figured that the power being the issue, brick took and plugged into another laptop and was good (the power led came). This is definitley on my laptop.

  So I am writing to ask you guys: what can cause the power light on my laptop, not to turn on, when I plug the DC Jack? Is this something on my laptop the charging circuit? What is the motherboard I need to change? How can I get a better diagnosis? I got this entire manual to solve my problem? My goal is to find out exactly what happened.

  In addition, I have the skills to apply basic manual procedures. I am able to disassemble my laptop (down to the motherboard) and refit it.

  Thank you!

  Ilyes Gouta.

  Hello

  It looks like the power supply electronic breakdown which is part of the motherboard. I don't think you can fix it yourself, in most cases, replace the whole motherboard.

• DeskJet F2430: Printing from the Internet has stopped working

  My printer worked for several years until now.  I have a Deskjet F2430 all-in-one. When I search for updates, it says that the driver, etc are up to date.  I still can not print a document on the computer, but cannot print anything on the web. A block appears generally who says that the error is unknown, but the script on the page has stopped working (not sure of the wording).

  aurielle

  You are welcome.

  Solutions come in different flavors.

  While Firefox is my own browser of choice for several reasons, I understand that everyone wants change browsers just to print a document.  The smile.  On the other hand, I find myself using Internet Explorer on occasion when Firefox is stubborn on a particular issue - sometimes just adapt to the situation.

  There should be a permanent solution for IE - can - be another Expert or someone else will chime.

  If I find something useful, I'll post.

  Good impression!

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• "Windows Live Essentials has stopped working" Message - After you install Internet Explorer 9

  Get the message stating "windows live essentials has stopped working" why?  Never had a problem with it until I downloaed Internet Explorer 9.  Is there a link?

  Your post is the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).  We cannot help you in this forum.

  Try the following link for Windows Live Essentials Support: http://support.microsoft.com/gp/windows-live-essentials#tab0

  You can also try the Forum Internet Explorer: http://answers.microsoft.com/en-us/ie/forum/ie9

• How to get back to be able to send photos to send, it now tells me that the internet explore has stopped working

  I cannot send pictures with my emails... This has happened last week... The information window told me that Internet Explorer has stopped working... what caused that?

  I have a Hotmail e-mail address now... and its working fine... Please help

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  Programs like Windows and Internet Explorer explore the host of other programs. When the addon programs have a problem the explorers blame themselves because they are the host.
   
  To disable addons for Internet Explorer.
   
  First test IE without any addins loaded: start - programs - Accessories - System Tools - Internet Explore (No. Addons).
   
  In Internet Explorer, click on Tools in the bar commands, and then Internet Options and click the Advanced tab, and then click reset.
   
  To manage addons on an individual basis in Internet Explorer click on Tools button on control bar - Manage the Addons - Activate or disable Addons.

• When I try to open files Office or Internet Explorer I get error: "host process for Windows Services has stopped working.

  Get the message below and impossible to open files microsoft office or internet explore:

  "Host process for Windows Services has stopped working"
  "A problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available. »

  original title: host process does not

  How to fix the "host process for windows services stopped working and was closed" on Vista
  http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/ I hope I could help

• Internet Explore has stopped working

  Here's my situation. I had left my computer desk sitting for 20 minutes and come back that he had gone to bed. I hit the space bar on the keyboard to wake him up. Then I find all my pages explore had liquidated or something. I had used the computer very well throughout the day now he decides to give me a problem.

  I try to open Internet Explorer Windows and get this message in a little box that goes up after apparently in analyzing a problem

  Internet Explorer has stopped working

  "A problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Well, I'm lucky, I can get on my laptop to marry and makes this type.  I tried to restart my computer and whenever I try to open internet explore I get the same message. Why is this happening? Everything worked well. I saw something on something KB and it redirects to a page Web say about it. But with no way to even do anything on the Explorer how to fix this? This is not the case on this laptop so why on the desktop. They both have the same Internet Explorer and Windows 7

  I like how he says he'll let know me if a solution is available. How can you if the Explorer doesn't correctly?

  Someone at - it solutions to this problem? Thanks in advance. I hope that it is something which will be developed on its own, but whenever I tried to restart it it will not work correctly.

  To reset internet Explorer

  1. Close all Internet Explorer Windows and Explorer that is currently open.
  2. Start Internet Explorer.
     Note If you are running Windows 8.1 or Windows 8, start Internet Explorer on the desktop. Change your settings will affect Internet Explorer and Internet Explorer that you start from the office.
  3. On the Tools menu, tap or click options Internet. If you don't see the Tools menu, press ALT.
  4. In the Internet Options window, tap or click the Advanced tab.
  5. Press or click reset. If you are using Windows Internet Explorer 6, click restore default.

• Desktop icons not working/Getting Internet Explorer has stopped working Message also

  I'm having a problem with my desktop icons.  The first time, I use a desktop icon to enter a site when I first you register my lap top everything works but when I close the site and try to open another icon on my desktop, icons no longer highlight or open.  This just started today.  Ran a comprehensive analysis with Norton 360, but he found nothing. Also in constant trouble with my internet explorer. Download internet explore has stopped working message.  Is there a way to fix this?

  I tried your suggestion about resetting my internet explore.  Follow the link that you provided, and it worked.  All my icons work (opened and closed several times to double check). Also my internet has regained its original speed.  Thank you very much!

• After you install Internet Explorer 9 Windows Explorer has stopped working

  All since I installed IE9 my windows Explorer has stopped working. Help, please!

  * original title - installed IE 9 & windows Explorer has stopped working. someone please throw me a life line.*

  Hi LesterHilliard,

  You have installed the final version of Internet Explorer 9?  See the following article for more details:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  I hope this helps!