DynDNS is online but cannot connect from the external network
I've set up DDNS the modem. IP is available but I can't connect external network.
Hello
Thanks for posting your query in the Microsoft Community Forums.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
Tags: Windows
Similar Questions
-
Excellent signal, but cannot connect to the wireless network
XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.
Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.
-
established - VPN connection, but cannot connect to the server?
vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4
Thank you
ASA Version 8.2 (1)
!
hostname ciscoasa5505
names of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.0.3 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 208.0.0.162 255.255.255.248
!
interface Vlan5
Shutdown
prior to interface Vlan1
nameif dmz
security-level 50
IP address dhcp setroute
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS lookup field inside
DNS server-group DefaultDNS
192.168.0.4 server name
Server name 208.0.0.11
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service TS-780-tcp - udp
port-object eq 780
object-group service Graphon tcp - udp
port-object eq 491
Allworx-2088 udp service object-group
port-object eq 2088
object-group service allworx-15000 udp
15000 15511 object-port Beach
object-group service udp allworx-2088
port-object eq 2088
object-group service allworx-5060 udp
port-object eq sip
object-group service allworx-8081 tcp
EQ port 8081 object
object-group service web-allworx tcp
EQ object of port 8080
allworx udp service object-group
16001 16010 object-port Beach
object-group service allworx-udp
object-port range 16384-16393
object-group service remote tcp - udp
port-object eq 779
object-group service billing1 tcp - udp
EQ object of port 8080
object-group service billing-1521 tcp - udp
port-object eq 1521
object-group service billing-6233 tcp - udp
6233 6234 object-port Beach
object-group service billing2-3389 tcp - udp
EQ port 3389 object
object-group service olivia-3389 tcp - udp
EQ port 3389 object
object-group service olivia-777-tcp - udp
port-object eq 777
netgroup group of objects
network-object host 192.168.0.15
network-object host 192.168.0.4
object-group service allworx1 tcp - udp
8080 description
EQ object of port 8080
allworx_15000 udp service object-group
15000 15511 object-port Beach
allworx_16384 udp service object-group
object-port range 16384-16393
DM_INLINE_UDP_1 udp service object-group
purpose of group allworx_16384
object-port range 16384 16403
object-group service allworx-5061 udp
range of object-port 5061 5062
object-group service ananit tcp - udp
port-object eq 880
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389
outside_access_in list extended access permit tcp any host 208.0.0.164 eq https
outside_access_in list extended access permit tcp any host 208.0.0.164 eq www
outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field
outside_access_in list extended access permit tcp any host 208.0.0.162 eq www
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group
outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777
outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive
outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000
outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group
outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061
outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group
outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0
Ping list extended access permit icmp any any echo response
inside_access_in of access allowed any ip an extended list
permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
access-list 1 standard allow 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
logging buffered stored notifications
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool
192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside) 1 192.168.0.0 255.255.255.0
alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255
public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255
public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255
public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255
public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area
public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255
static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1
Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.255.0 inside
http 192.168.0.3 255.255.255.255 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt noproxyarp inside
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs
peer set card crypto outside_map 1 108.0.0.97
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 20 match address outside_20_cryptomap
card crypto outside_map 20 set pfs
peer set card crypto outside_map 20 69.0.0.54
outside_map crypto 20 card value transform-set ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life no
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 1
life no
Telnet timeout 5
SSH timeout 5
Console timeout 0
identifying client DHCP-client interface dmz
dhcpd outside auto_config
!
dhcpd address 192.168.0.20 - 192.168.0.50 inside
dhcpd dns 192.168.0.4 208.0.0.11 interface inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal group anyconnect strategy
attributes of the strategy group anyconnect
VPN-tunnel-Protocol svc webvpn
WebVPN
list of URLS no
SVC request enable
encrypted olivia Zta1M8bCsJst9NAs password username
username of graciela CdnZ0hm9o72q6Ddj encrypted password
tunnel-group 69.0.0.54 type ipsec-l2l
IPSec-attributes tunnel-group 69.0.0.54
pre-shared-key *.
tunnel-group 108.0.0.97 type ipsec-l2l
IPSec-attributes tunnel-group 108.0.0.97
pre-shared-key *.
tunnel-group anyconnect type remote access
tunnel-group anyconnect General attributes
remote address pool
strategy-group-by default anyconnect
tunnel-group anyconnect webvpn-attributes
Group-alias anyconnect enable
!
Global class-card class
match default-inspection-traffic
!
!
World-Policy policy-map
Global category
inspect the icmp
!
service-policy-international policy global
: end
ASDM location 208.0.0.164 255.255.255.255 inside
ASDM location 192.168.0.15 255.255.255.255 inside
ASDM location 192.168.50.0 255.255.255.0 inside
ASDM location 192.168.1.0 255.255.255.0 inside
don't allow no asdm history
Right now your nat 0 (NAT exemption) follows the access list:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.
Then try to add an entry to the list of access as:
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0
It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.
-
Wireless network adapter cannot connect to the wireless network
When I start my PC HP TouchSmart it does not recognize my wireless network. It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer. It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network. Any help?
Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.
Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
Troubleshoot network adapter problems to Microsoft link above.
Try without commitment TCP/IPv6:
If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)
http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/
See you soon.
Mick Murphy - Microsoft partner
-
HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet
So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.
I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.
All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.
This printer makes me crazy - please help
Hi @mastersword64,
Welcome to the HP community!
I hope you have a pleasant experience with us.
I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.
Here are some steps, I suggest trying to get your web services up and running it again:
Network Power Reset:
We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.
Restore the default settings of the network and reconnect:
1. on the front panel of the printer, press your up wireless icon
2. Select settings.
3. Select restore default network settings.
4 turn on your printer.
5. once it is initialized to save, press the wireless icon again.
6. Select settings.
7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.
8. try to activate the web services again.
Configure a manual DNS for your printer:
1 obtain the IP address of your printer
a. This can be done by pressing the icon on the printer wireless.
2. Enter the printer's IP address in a browser on your computer.
3. Select the tab network at the top of the page.
4. on the left, select network.
5. Select network address (IP)
6. Select manual DNS server
a. manual Preferred DNS should read 8.8.8.8
b. alternate DNS server should read. 8.8.4.4
7. Select apply. You can get a warning simply select OK.
Please reply to let me know if these steps resolve your issue.
Good luck!
-
Satellite Pro A200 cannot connect to the wireless network
Hello
I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.
I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.Any ideas?
the FN/F8 will work?
Help! Please, I beg you!Have you tried using System Restore and restore the operating system on time earlier?
Maybe this will remove the update installed, and you can again use the WLAN.Check it out.
-
PC cannot connect to the wireless network
Windows Vista and office computer HP. The use of the Airport Extreme.
All other computers in the House can connect to the wireless network.
The Vista machine declined the connection Wireless intermittently for the past two weeks. Tonight, he lost it completely. When I click on "connect to network" in the network control panel - I see the wireless network. But when I click on connect, I get a message that Windows cannot connect to this network.
I changed the password on the Airport Extreme and rebooted, it. Wireless usb on Windows machine the device works correctly, by checking through the properties box.
For example, Vista machine is recognizing the wireless network, but does not connect. Why not?
I'm ready to throw the computer out the window!
Hello
Check the PoodlesAway solution to the same issue here:
======================================
Apple Airport may be your main problem - did you check its firmware?
http://reviews.CNET.com/8301-13727_7-10331876-263.html
======================================
Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Windows cannot connect to the home network
Hello
My laptop can't connect to my home network. It can detect the network, but whenever I try to connect to it, it said "Windows could not connect to the (network).
My other devices (iPad, mobile phone) can connect to him, so I doubt that it is a problem of modem?
I have connected my laptop to the modem directly via an ethernet cable and it works. What is a network driver problem? Because I tried to update the driver, but they said that they are updated to the latest already.
Someone help me please.
Hello
Thanks for posting your query in Microsoft Community.
I understand that you are unable to connect to the network via modem, but thread and I'll be happy to answer your query. Let me ask you;
- How you did update the network driver?
- When was the last time you were able to connect to the wireless network?
- Remember to no particular change in the computer before the show?
- What is the brand and model of the computer?
Since you are able to connect to the network using the modem, it could be because of the card network is outdated or corrupted. I would recommend that you try the methods below and check.
Method 1: Run the network troubleshooter
Refer to the article below to run the network troubleshooter
Using the troubleshooter from network in Windows 7
Method 2: Update the NIC manufacturer support Web site
I suggest you to visit the website of the manufacturer of the computer support and install the latest network adapter on Windows 7 Web site and check.
Restart the computer and then try to connect to the network after you have installed the latest driver.
See also: why I can't connect to a network?
Hope this information is useful.
-
cannot connect to the local network using windows 7
Recently bought a HP Pavilion laptop (AMD Athlon II P320 Dual - Core) ((G62 - 208CA)). Having a problem connecting to the local network. I have flashing lights on the lan (orange and white) connector.
Using the ipconfig command, I get an IP address, subnet mask and gateway by default however messages below will appear:
Tunnel adapter isatap. <578608BD-22EF-4A01-90ED-D709CB81D027>:
State media: media disconnected
The connection-specific DNS suffix. :
Tunnel connection to the Local network adapter * 9:
State media: media disconnected
The connection-specific DNS suffix. :
Tunnel adapter isatap.
: State media: media disconnected
The connection-specific DNS suffix. :
TEREDO TUNNELING Pseudo-Interface tunnel adapter:
State media: media disconnected
The connection-specific DNS suffix. :
Tunnel adapter isatap. our field: *
State media: media disconnected
The connection-specific DNS suffix. :
I tried to turn off the firewall and connect without success
My network card is a Realtek PCIe FE Family Controller and confirmed that the drivers are up to date
Any help would be appreciated
Thank you
Well Yes! So it was an older version of the bonjour service... thank you Adobe.
You can find the latest version here:
-
After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,
but unable to connect to the internet using the standard account. I have the latest version of the Solution Explorer.
How to fix this?
Glad to hear it.
If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem. -
strong wifi signal, but cannot connect to the internet
I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.
Thank you
Hello
Thanks for posting your query in Microsoft Community.
I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.
- What happens while you are trying to connect to the internet with the Wi - Fi network?
- You are able to connect to internet while, you use a wired connection?
You can try to follow the following suggestions to solve the problem.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7I suggest you to consult the help articles and check if it helps.
Windows wireless and wired network connection problems
Additional information:
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.
-
NB200 can connect to wireless networks, but cannot connect to the internet
I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.
I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?
Hello
You can try to renew the IP address.
Got to RUN and type CMD.
This would start the console (DOS window)Here, you use the command: ipconfig / renew
It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
Here you can get the most recent:
http://APS2.toshiba-tro.de/WLAN/Welcome them
-
HP6700 on (blue) antenna wifi but cannot connect to the network
HP6700 was working, now no airprint. In settings, it says unable to connect to the internet. I reinstalled wifi using WPS and have a blue light on the antenna. On Ipad, it says printer is in "idle" mode. How can he wake up?
Printer files network It is a solution copied from a previous post of Provost.
First do the following:
- Print a printer wireless network Test report
- Print a Page of Setup network printer
Possible solutions:
- Move the printer to be closer to the router if the wireless network Test report indicates the intensity of the signal is "Very low" or "Low".
- Move the printer away from the router if currently less than 1 m (3 ft.).
- Look at the last page of the Network Configuration Page. Near wireless networks appears along with the channels they use. Together, the channel of your router to channel 1, 6 or 11 according to the proximity of other channels are and how many networks use each channel. Having other channels of network near your (less than 5 channels) is not good. Using a channel that is heavily used by other networks is also not good. Do not use the setting "Auto" from the channel on the router.
- Change the width of your router to 20 MHz channel (or 54 Mbit/s). Do not use 40 MHz (or 300Mbps) parameters or 20/40 MHz (Auto).
- If the wireless network Test report indicates 'more than a wireless router was found which corresponds to your wireless network (SSID)... name ', try changing the name of your network in your router to something unique.
Note: you will need to reconnect all the wireless devices that connect to your network using the new network name.
- Make sure that the "Auto off" function of the printer is disabled. If this feature is enabled, the printer turns OFF after a period of inactivity.
- If you use an Extender 'Wireless' to extend the wireless signal, try turning it off to see if the problem goes away.
- If you still have questions, set a static IP address on the printer. This can be done using the Home Page (EWS of the printer) or from the Panel on many models of printer printers. Several models of printers have a feature 'suggests the IP address. Use this feature if you are not sure what setting to use IP address.
Note: you may need to use the "" Update IP address"utility provided by the printer software to update the software with the new IP address.
Please let me know if it helps.
Tobindo
A representative not hp
-
Found ENET-9481, but cannot connect to the IP WHEREAS address
I have a NI ENET-9481 device at a remote site that I can't seem to connect to the MAX. There was previously an another ENET-9481 operational it for several months before she has apparently failed.
The new device has been updated with the IP 192.168.0.5 before it was delivered on the remote, and then just plugged site as a replacement for an existing ENET-9481, who did not.
The device showed initially as disconnected, even if the device information appeared. After trying to re-connect, I changed the last byte of the address at 55, Max and MAX reported that he could not access the device. It seemed reasonable that it was not plugged into it.
Then I deleted the device and attempted to add again by searching for new devices on the network, reasoning that the device in MAX could be a "ghost" of the previous module ENET. MAX found the device, not in the right IP (192.168.0.5), but the address has changed (192.168.0.55), although MAX said that it was not connected and that he could not communicate with the device. The device was found, he could not be connected to. I removed and added the device a couple of times, MAX restart on the off chance that it might be useful
I then removed database MAX in C:\Documents and Settings\All Users\Application Data\National Instruments\MAX according to this article: http://digital.ni.com/public.nsf/websearch/BECA7EF547AE755386256CC600789C8B?OpenDocument
After the machine restarts, I still get the same result.
I tried ping 192.168.0.5, and I get a response. I have also managed telneted to port 80 at this address and tried to GET index.html. This value returned an error by 'Mbedthis-Appweb/2.4.0' page, so assume that means, it's the ENET-9481 module and not a PC Windows, crouched on his IP address.
I tried to ping 192.168.0.55 too but I get no response, so I guess it's not really peripheral to this address.
For the benefit of anyone who stumbles across this point-, the problem seems to have resolved itself. the power of the ENET-9481 has been recycled and he came to work, with the IP address has changed (192.168.0.55)
-
Acquire the msg network but cannot connect to the internet?
I Tower IBM 'Think pad' and when I try to connect to the internet, it is said ' acquisition of network and it connects don't not in the network, the bars keep fluctuating between 2-4 bar, but still won't connect, a 'fix' I tried it same thing... will to "acquire the network but does not connect."
What seems to be the problem, what do you suggest to please. It was working fine until last night.
Have you tried restarting your wireless router? It off for a few minutes, then turn on and wait a few minutes and then restart your computer.
I hope this helps.
Maybe you are looking for
-
Hello I tried to fix this for hours, I hope someone can help me. I downloaded the ISO "Win10_1607_English_x64.iso" (4.29 GB) file and with him came a "info.plist" (2 KB), so they are both on my 64 GB USB Drive (format: MS-DOS (FAT32)) called 'WINSTAL
-
where the drop of firefox with tab options?
How to find firefox drop-down list with tab options of the nexus program 7. I need to fix a choice of popup ads I did accidentally.
-
Security_Compliance_Manager_Setup
Microsoft SQL Server 2008 Express and Microsoft Security Compliance Manager not installing in my machine, which results in the error "this program has problems of compactibility. What can I do? The error message indicates that "Windows server 2008" i
-
Explorer Windows crashes a lot!
I just clicked on the "Start" menu and crashed through Windows Explorer. I have Vista SP2 with the latest hardware drivers. details of the problem: Problem event name: APPCRASHApplication name: Explorer.EXEApplication version: 6.0.6002.18005Applicati
-
Photosmart C410 will signal network offline / busy
My operating system is 10.6 with a Macbook Pro using a Verizon router. As I already posted the message I received was off-line and now it is showing this printer is busy, although nothing is being printed.