worddl Visual basic 6.0 standard on winddow 7

Similar Questions

• Visual Basic EDITOR shortcut on the Apple - VM Windows wireless keyboard?

  On a PC is the hotkey to bring the Visual Basic Editor (for example, MSExcel)

  What is the corresponding shortcut on a wireless Apple keyboard when using Office applications in a Windows VM?

  ALTF11 works for me but I have my preferences for the OS X keyboard set to 'Use all F1, F2, etc. as standard function keys keys' in you so the setting that activates the characteristics printed on each key by default, then you will need to press FnAlt F11F11 or I believe you can uncheck "enable Mac OS shortcuts keyboard" in VMware Fusion preferences and then Altshould work without using Fn +.  VMware Fusion (menu bar) > Preferences... > keyboard & mouse > keyboard shortcuts in Mac OS

• orders or visa of TCP/IP by using visual basic

  What are the dll files and below that I need to communicate with a device via a rj45 by visbual basic cable, I can communicate when I use hyperterminal, but I can't via visual basic

  TCPIP::192.168.48.11: this is where I am stuck

  Hello

  The following tutorial will guide you through a few failures of measures to ensure that your instrument is connected correctly, this should help us understand whence the questions.

  Instrument Ethernet Control tutorial

  Introduction to the Instrument control using Ethernet

  Thank you

  Scott M.

• License with Measurement Studio and Visual Basic 2008 Express problem

  Hello!

  I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008.

  I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized."}

  Does anyone have an idea?

  Thanks in advance!

  Andreas

  Here is the full error message:

  System.TypeInitializationException wurde nicht Festival.
  Message = "Der Typeninitialisierer as 'NationalInstruments.Analysis.Dsp.Transforms' hat eine exception caused."
  Source = "NationalInstruments.Analysis.Professional"
  TypeName = "NationalInstruments.Analysis.Dsp.Transforms"
  StackTrace:
  BEI NationalInstruments.Analysis.Dsp.Transforms.RealFft (Double [] realData)
  EIB LDS. LDS_Form1.ButtonFFT_Click (Object sender, EventArgs e) D:\devel\LDS\pc\LDS\LDS\LDS_Form1.vb:Zeile 1700.
  bei System.Windows.Forms.Control.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  EIB System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  EIB System.Windows.Forms.Control.WndProc (Message & m)
  bei System.Windows.Forms.ButtonBase.WndProc (Message & m)
  bei System.Windows.Forms.Button.WndProc (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  bei System.Windows.Forms.NativeWindow.DebuggableCallback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
  bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
  bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
  EIB System.Windows.Forms.Application.Run (ApplicationContext context)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (String [] command-line)
  EIB LDS. My.MyApplication.Main (String [] Args) in 17d14f5c-a337-4978-8281 - 53493378c1071.vb:Zeile 81.
  bei System.AppDomain._nExecuteAssembly (Assembly, String [] args)
  bei System.AppDomain.nExecuteAssembly (Assembly, String [] args)
  bei System.Runtime.Hosting.ManifestRunner.Run (Boolean checkAptModel)
  bei System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext, String [] activationCustomData)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext)
  EIB System.Activator.CreateInstance (ActivationContext activationContext)
  BEI Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone)
  bei System.Threading.ThreadHelper.ThreadStart_Context (Object state)
  bei System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  bei System.Threading.ThreadHelper.ThreadStart)
  InnerException: System.ComponentModel.LicenseException
  Message = "NationalInstruments.Restricted.AnalysisLicenser is unlicensed."
  Source = "NationalInstruments.Common"
  StackTrace:
  AT NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)
  BEI NationalInstruments.Restricted.LicenseBase.a (String Type A_0, A_1, A_2 object)
  BEI NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)
  AT NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)
  BEI NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)
  bei System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, Object instance, Boolean allowExceptions, license, licenseKey, String & license)
  bei System.ComponentModel.LicenseManager.ValidateInternal (Type type, Object instance, Boolean allowExceptions, license & license)
  bei System.ComponentModel.LicenseManager.Validate (Type type, object instance)
  EIB NationalInstruments.Restricted.AnalysisLicenser... ctor()
  EIB NationalInstruments.Analysis.Dsp.Transforms... cctor()
  InnerException:

  Hi Andreas,

  It is scheduled for any Visual Studio Express edition, because these editions do not allow 3rd party integration. So, you will need to perform some additional steps to get a license to work properly.  Refer to the Measurement Studio for Visual Studio Express Editions support KB (in particular, paragraph 2 pointing you to our help).

  Best regards

• buffer size and sync with the cDAQ 9188 problems and Visual Basic

  Hi all, I have a cDAQ-9188 with 9235 for quarter bridge straing caliber acquisition module.

  I would appreciate help to understand how synchronization and buffer.

  I do not use LabView: I'm developing in Visual Basic, Visual Studio 2010.

  I developed my app of the NI AcqStrainSample example. What I found in the order is:

  -CreateStrainGageChannel

  -ConfigureSampleClock

  -create an AnalogMultiChannelReader

  and

  -Start the task

  There is a timer in the VB application, once the task begun, that triggers the playback feature. This function uses:

  -AnalogMultiChannelReader.ReadWaveform (- 1).

  I have no problem with CreateStrainGageChannel, I put 8 channels and other settings.

  Regarding the ConfigureSampleClock, I have some doubts. I want a continuous acquisition, then I put the internal rate, signal source 1000, continuous sample mode, I set the size buffer using the parameter "sampled by channel.

  What I wonder is:

  (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

  (2) can I read the buffer, let's say, once per second and read all samples stored in it?

  (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

  (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

  Thank you very much for the help

  Hi Roberto-

  I will address each of your questions:

  (1) can I put any kind of buffer size? That the limited hardware of the module (9235) or DAQ (9188)?

  The samplesPerChannel parameter has different features according to the synchronization mode, you choose.  If you choose finished samples the parameter samplesPerChannel determines how many sample clocks to generate and also determines the exact size to use.  But if you use streaming samples, the samplesPerChannel and speed settings are used together to determine the size of the buffer, according to this excerpt from the reference help C DAQmx:

  

  Note that this buffer is a buffer software host-side.  There can be no impact on the material available on the cDAQ-9188 or NI 9235 buffers.  These devices each have relatively small equipment pads and their firmware and the Driver NOR-DAQmx driver software transfer data device to automatically host and the most effective way possible.  The buffer on the host side then holds the data until you call DAQmx Read or otherwise the input stream of service.

  (2) can I read the buffer, let's say, once per second and read all samples stored in it?

  Yes.  You would achieve this by choosing a DAQmx Read size equal to the inverse of the sampling frequency (during 1 second data) or a multiple of that of the other playback times.

  (3) do I have to implement my own buffer for playback of data acquisition, or it is not necessary?

  No, you should not need to implement your own stamp.  The DAQmx buffer on the host side will contain the data until you call the DAQmx Read function.  If you want to read from this buffer less frequently you should consider increasing its size to avoid the overflow of this buffer.  Which brings me to your next question...

  (4) because I don't want to lose packets: y at - it a timestamp index or a package, I can use to check for this?

  DAQmx will meet you if all packets are lost.  The default behavior is to stop the flow of data and present an error if the buffer of the side host DAQmx overflows (if, for example, your application does not pick up samples of this buffer at a rate equal or faster than they are acquired, on average).

  If, for any reason, you want to let DAQmx to ignore the conditions of saturation (perhaps, for example, if you want to sample continuously at a high rate but want only interested in retrieving the most recent subset of samples), you can use the DAQmxSetReadOverWrite property and set it to DAQmx_Val_OverwriteUnreadSamps.

  I hope this helps.

• equivalent of variable static visual Basic in LabVIEW

  Hi all!

  I am doing a project where I count values. After I farm/Stop the program I want the value to be intact and continue with the last value.

  I know that in Visual Basic. Using the static variable, we can keep the same value we close the program.

  Kindly help...

  I know that in Visual Basic. Using the static variable, we can keep the same value we close the program.

  I program in Visual Basic. What you write, it's simply NOT true. Once you close a program all that static variables even disappeared.

  Do as suggested by crossrulz.

• PXI-6561 HS - DIO Visual Basic 6 examples?

  I have one of these cards in a testing station.

  Is there an example of Visual Basic 6 code?  I see the code example for C.

  Edit: Can't beat Google. I searched on "examples of visual basic 6 hs - dio" and got http://digital.ni.com/public.nsf/allkb/C926233A47D2B8708625714D004F5D6F

  http://digital.NI.com/public.nsf/allkb/C926233A47D2B8708625714D004F5D6F

• Visual BASIC

  Hello!

  Tell please how can I find and download visual basic 2010 or 2012 or 2015?
  Help, please.

  I'm stuck. I have not found the files to download!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Visual Basic 6 / Visual Studio 2000

  Could someone help me please know where I can download a version for Visual Basic 6.0 or Visual Studio 2000 bug free?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• chrome in Visual Basic

  Hello.

  I have a big problem.

  I like to run chrome in Visual Basic (run in the vb as a webbrowser).

  Thank you.

  Help me

  Hello

  I suggest you post your question on the following forums:

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral

  You can also post your query on Google Chrome forums. Check out the link:

  http://productforums.Google.com/d/home

  It will be useful.

• How can I change the value of 'dd MMM yyyy' format in a datepicker from the Toolbox in Visual Basic

  I want to replace the regional format date and time. Please help. I have change the format 0 - dtpLongDate, but the problem persists.

  Hi Jay,.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  MSDN Forum (Visual Basic)

  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home

  Hope this information helps.

• How to automate the cutting through a visual basic 6.0 application tool?

  Original title: Visual basic 6.0

  How to automate the tool to cut through a visual basic 6.0 application. Or my visual basic 6.0 application is to take screenshots and save them as gif images, but the files are too big and take a long time to be sent by e-mail in real time. Please if someone could help, need a code in visual basic 6.0 to make these small files.

  Hello

  You can get support for development on the MSDN Forums tools.

  MSDN forums: Index

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Concerning

• How to use IBCLR in Visual Basic

  I suck at programming and the recommendations of the syntax of the API on http://www.ni.com/pdf/manuals/321038g.pdf do not work.

  I use Visual Basic 2010 Express. I get a lot of messages to work, but I think I'm leaving data in the buffer with some commands. I see that IBCLR clear a specific device in the buffer, but I'm having a hard time with the syntax.

  I am currenlty

  GpibDevice.Write ("ibclr (ANP)") , but it does not work.

  Any guidance is appreciated.

  High-Q wrote:

  I need more examples of how to manipulate the markers, min, Max, etc...

  You should see if Agilent has specific examples.

  As I've written before, READ the help files for Agilent. You will not be able to get a lot done without it.

• How to close a visual basic application?

  I try to open a Setup program, but it does not open and gives the following message: "one or more Visual Basic applications are running.  If please close and then click OK. "Closing the program doesn't seem to work.  In the past, I've been able to move the same installer of my virtual machine where it works to my main machine where it does not and the problems seemed to be solved.  Don't give me a long detailed explanation that requires a large amount of code writing. It would be not useful since I'm not a coder.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

• help with quality report with the functions of Chapter 5 in visual basic 2010

  Public

  Class GradeReport Private Sub btnExit_Click (ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click me.close() End Sub Private Sub btnCalculate_Click (sender As System.Object, e As System.EventArgs) Handles btnCalculate.Click Dim NumScores As Integer Dim average As Single Dim name As String Dim input As String Dim Count As Integer Dim total As Single ' get the number of students

  entry = InputBox)

  "How many students results of tests that you want to" & _ "Average?", "enter a value") If Not Integer.TryParse (input, NumScores) then return end if ' store the starting total values and County. "

  Total = 0

  Count = 1

  "The results of the tests. Do so until the County > NumScores

  entry = InputBox)

  _ "Enter the value of the test music" & Count.ToString, "Test points required')"

  Total += Total (input)

  Count += 1

  Loop ' calculate and display the average. If

  NumScores > 0 Then

  Average = Total / NumScores

  On the other

  Average = 0.0

  End If

  1stGradeReport.text = Average.ToString

  "Calculate and display the letter grade. If the average< 60="">

  1stGradeReport.text =

  « F »

  Elself average< 70="">

  1stGradeReport.text =

  « D »

  Elself average< 80="">

  1stGradeReport.text =

  « C »

  Elself average< 90="">

  1stGradeReport.text =

  « B »

  Elself average< 100="">

  1stGradeReport.text =

  "A" End If End Sub

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the MSDN Developer audience. You can get support for Visual Basic 2010 in the following forum.

  VB general forum:

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  Concerning